Citroen Jumpy 2021-2023

The Citron Jumpy is known for being strong, roomy, and able to move quickly. It comes in a number of different designs, such as panel van, crew van, and minibus, so it can meet different business needs. The Jumpy’s interior is usually functional and well-designed, with a focus on making the most of the room for cargo and making sure the driver is comfortable. Depending on how it’s set up, it can hold different numbers of people or a lot of stuff. The Jumpy can be powered by a variety of diesel engines that offer a good balance between speed and fuel economy. These engines are made to meet the needs of business users. They have enough power to move heavy loads or work in difficult circumstances. The Jumpy also has safety and driver-assistance features like stability control, traction control, back parking sensors, and lane departure warning, among others. These features are meant to make driving safer and make it easier for drivers to deal with tough road conditions.

Cruise control – Specific recommendations

 

The cruise control function does not guarantee compliance with the maximum authorized speed and the safety distance between vehicles, the driver remains responsible for their driving. In the interest of public safety, only use cruise control if the traffic conditions enable vehicles to drive at a steady speed and maintain an adequate safety distance.

Remain vigilant while cruise control is activated. If you press and hold one of the speed setting modification buttons, your vehicle may change speed very abruptly. When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the set speed. Brake if necessary to control the vehicle speed. On steep climbs or when towing, the set speed may not be reached or maintained.

Exceeding the programmed speed setting

You can temporarily exceed the speed setting by pressing the accelerator pedal (the programmed speed flashes). To return to the speed setting, release the accelerator pedal (when the set speed is reached again, the displayed speed stops flashing).

Operating limits
Never use the system in the following situations:

• In an urban area with a risk of pedestrians crossing the road.
• In heavy traffic.
• On winding or steep roads.
• On slippery or flooded roads.
• In poor weather conditions.
• In the event of restricted visibility for the driver.
• Driving on a speed circuit.
• Driving on a rolling road.
• When using snow chains, non-slip covers or studded tires.

Cruise control

For more information, refer to the General recommendations on the use of driving and maneuvering aids and the

Cruise control – Specific recommendations.
This system automatically maintains the vehicle’s speed at the value programmed by the driver (speed setting), without the use of the accelerator pedal. Cruise control is switched on manually. It requires a minimum vehicle speed of 25 mph (40 km/h). With a manual gearbox, third gear or higher must be engaged. With an automatic gearbox, mode D or second gear or higher in mode M must be engaged. With a drive selector, mode D or B must be engaged.

Cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with the Stop & Start function. Cruise control remains active after changing gear, regardless of the gearbox type, on engines fitted with the Stop & Start function.

Steering-mounted control

1. ON (CRUISE position)/OFF (position 0)
2. Activate cruise control at the current speed/decrease speed setting
3. Activate cruise control at the current speed/increase speed setting
4. Pause/resume cruise control with the speed setting previously saved
5. Depending on the version:
   • Display the speed thresholds saved using the Memorising speeds function or
   • Use the speed suggested by the Road signs recognition function (MEM display)
     For more information on Memorising speeds or Road sign recognition, refer to the corresponding sections.
6. Cruise control pause/resume indication.
7. Cruise control mode selection indication.
8. Speed setting value.

Switching on/pausing

• Turn thumbwheel 1 to the “CRUISE” position to select cruise control mode; the function is paused.
• Press button 2-SET- or 3-SET+ to activate cruise control and save a speed setting when the vehicle has reached the desired speed; the vehicle’s current speed is saved as the speed setting.
• Release the accelerator pedal.
• Pressing button 4-II temporarily pauses the function (pause).
• Pressing button 4-II again resumes the operation of the cruise control (ON).

Cruise control can also be paused temporarily:

• by pressing the brake pedal.
• by pressing the clutch pedal with a manual gearbox (depending on the engine fitted).
• automatically, if the electronic stability control (ESC) system is triggered.

Changing the cruise speed setting
The cruise control must be active.
To change the cruise speed setting, based on the vehicle’s current speed:

• For steps of +/- 1 mph (1 km/h), briefly press 2-SET- or 3-SET+ repeatedly.
• For steps of +/- 5 mph (5 km/h), press and hold 2-SET- or 3-SET+.

Pressing and holding 2-SET- or 3-SET+ results in a rapid change in the speed of the vehicle. As a precaution, we recommend a cruise speed fairly close to the current speed of your vehicle, to avoid any sudden acceleration or deceleration of the vehicle.

To change the cruise speed setting using memorized speed settings and from the touch screen:

• Press 5-MEM to display the memorized speed settings.
• Press the touchscreen button for the desired speed setting.
• The selection screen closes after a few moments.

This setting becomes the new cruise speed. To change the cruise speed setting using the speed suggested by the Road signs recognition function displayed on the instrument panel:

• Press 5-MEM once; a message is displayed, confirming the memorisation request.
• Press 5-MEM again to save the suggested speed. The new speed setting value is displayed on the instrument panel.

Temporarily exceeding the programmed speed
If needed (when overtaking, for example), it is possible to exceed the programmed speed by pressing the accelerator pedal. Cruise control is temporarily deactivated and the programmed speed displayed flashes. To return to the programmed speed, simply release the accelerator pedal. Once the vehicle has returned to the programmed speed, cruise control takes over again and the programmed speed setting stops flashing. When descending a steep hill, the cruise control system cannot prevent the vehicle from exceeding the programmed speed. You may have to brake to control the speed of your vehicle. In this case, the cruise control is automatically paused. To activate the system again, with the vehicle speed above 25 mph (40 km/h), press button 4.

Switching off

• Turn the thumbwheel 1 to the “0” position: the cruise control information disappears from the screen.

Malfunction
In the event of a malfunction, dashes are displayed flashing and then fixed instead of the speed setting. Have it checked by a CITROËN dealer or a qualified workshop.

Adaptive cruise control

Refer to the General recommendations on the use of driving and manoeuvring aids and to Cruise control- particular recommendations. This system automatically maintains the speed of your vehicle at a value which you set (speed setting), while keeping a safe distance from the vehicle in front (target vehicle), and which has been set beforehand by the driver. The system controls the vehicle’s acceleration and deceleration automatically using only engine braking (as if the driver had pressed the “-” minus button).

To do this, it uses a radar located in the front bumper. Primarily designed for driving on main roads and motorways, this system only works with moving vehicles driving in the same direction as your vehicle. If the driver operates a direction indicator to overtake a slower vehicle, the cruise control allows the vehicle to temporarily approach the vehicle in front to assist the

FAQ