2024 RAM 4500 Chassis Cab Display Setup Guide
The 2024 RAM 4500 Chassis Cab Display Setup Guide shows people how to use the display system’s cutting-edge technology and easy-to-understand layout. With its cutting-edge display setup, the 2024 RAM 4500 Chassis Cab leads the way in the next generation of innovative cars. This detailed guide is meant to help drivers find their way around and get the most out of the many features built into the car’s screen, making the driving experience smooth and personalized. The guide shows users how to use the RAM 4500 Chassis Cab’s display system to its fullest by giving them step-by-step instructions on everything from setting up driver assistance settings to getting to entertainment and connectivity choices. This setup guide, which focuses on simplicity and usefulness, shows how committed RAM is to giving modern users not only a truck but also a sophisticated and easy-to-use driving experience.
INSTRUMENT CLUSTER DISPLAY
Your vehicle is equipped with an instrument cluster display, which offers useful information to the driver. With the ignition in the OFF mode, opening/closing of a door will activate the display for viewing, and display the total miles, or kilometers, in the odometer. Your instrument cluster display is designed to display important information about your vehicle’s systems and features. Using a driver interactive display located on the instrument panel, your instrument cluster display can show you how systems are working and give you warnings when they are not. The steering wheel-mounted controls allow you to scroll through the main menus and submenus. You can access the specific information you want and make selections and adjustments.
INSTRUMENT CLUSTER DISPLAY LOCATION AND CONTROLS
Instrument Cluster Display/Controls Location
- Instrument Cluster Display Screen
- Instrument Cluster Display Controls
The system allows the driver to select information by pushing the following instrument cluster display control buttons located on the left side of the steering wheel.
Base/Midline Instrument Cluster Display Control Buttons
- Left Arrow Button
- Up Arrow Button
- Right Arrow Button
- Down Arrow Button
- OK Button
Premium Instrument Cluster Display Control Buttons
- Left Arrow Button
- Up Arrow Button
- Right Arrow Button
- Down Arrow Button
- OK Button
- Menu Button
NOTE:
- Holding the up/down or left / right arrow button will loop the user through the currently selected menu or options presented on the screen.
- Main menu and submenus wrap for continuous scrolling.
- Upon returning to the main menu, the last submenu screen viewed within that main menu will be displayed.
OK Button:
For Digital Speedometer:
- Pushing the OK button changes units (mph or km/h).
Menu Button
- Press the Menu button for the Home Screen display.
- Navigate left or right to highlight the desired tile. Press OK to select desired. Once OK is pressed, the cluster will navigate to the selected submenu (e.g. “Audio”).
NOTE:
Exiting the Home Screen Speed Limit tile and Navigation tile with no Ethernet navigates to the Speedometer submenu. - Press up or down to select a different screen
within the selected category. - If the Menu button is pressed while in this view, the cluster
will return to the previously displayed screen. - Press and hold the OK button to enter edit mode.
- Instruction text may overlay the lower tachometer
For Screen Setup
- The OK button allows the user to enter the menu and submenus.
- Within each submenu layer, the up and down arrow buttons will allow the user to select the item of interest.
- Pushing the OK button makes the selection and a confirmation screen will appear (returning the user to the first page of the submenu).
- Pushing the left arrow button will exit each submenu layer and return to the main menu.
Custom Tile Configuration — If Equipped
To customize the instrument cluster further, you can select up to five tiles to display information based on your needs.
- Press the MENU button for the Home Screen display
- Navigate Left tile
- Press OK to select the tile navigate to the selected submenu and press OK again to add your selection to your tile view
- The main menu options of the home screen are Driver Info, Vehicle Info, Navigation — If Equipped, Audio, and Off-Road
Custom Tile Screen Example
You can customize your Instrument Cluster Display with up to five tiles that may consist of the following:
NOTE:
These options may vary based on your vehicle trim level.
- Navigation
- Route Set / Route Not Set
- TripA/TripB
- Vehicle Info
- Coolant Temp
- Trans Temp
- Oil Temp
- Oil Pressure
- Battery Voltage
- Oil Life
- Tire Pressure
- Fuel Economy
- Air Suspension
- Driver Info
- Driver Assist
- Audio
- Audio Info
- Off-Road
- Selec-Terrain / Air Suspension Status
- Steering Angle
- Pitch
- Roll
- Trailer Tow
- Trailer Trip
- Trailer Brake
- Trailer Tire Pressure Monitor
OIL LIFE RESET
Use this QR code to access your digital experience.
Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will display Scan me in the instrument cluster display after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, depending on your personal driving style.
NOTE:
Use the steering wheel instrument cluster display controls for the following procedure. Oil Life Reset Procedure
- Without pushing the brake pedal, push the ENGINE START/STOP button and place the ignition in the ON/RUN position (do not start the engine).
- Push and release the down arrow button to scroll downward through the main menu to “Vehicle Info.”
- Push and release the right arrow button to access the ”Vehicle Info” screen, then scroll up or down to select “Oil Life.”
- Push and hold the right arrow button to select “Reset”.
- Push and release the down arrow button to select “Yes,” then push and release the right arrow button to reset the Oil Life to 100%.
- Push and release the up arrow button to exit the instrument cluster display screen.
Secondary Method Of Resetting Engine Oil Life
- Without pressing the brake pedal, push the ENGINE START/STOP button and place the ignition in the ON/RUN position (do not start the engine).
- Fully press the accelerator pedal, slowly, three times within ten seconds.
- Without pushing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF position.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator system does not reset. If necessary, repeat this procedure.
DISPLAY MENU ITEMS
Push and release the up or down arrow button until the desired selectable menu icon is highlighted in the instrument cluster display.
The instrument cluster display menu items may consist of the following:
| Speedometer | Vehicle Info | Off Road — If Equipped |
| Driver Assist —If Equipped | Fuel Economy | Trip A/Trip B |
| Screen Set Up | Vehicle Settings — If Equipped | Commercial Settings —If Equipped |
| Trailer Tow | Audio | Messages |
Speedometer
Push and release the up until the speedometer menu item is highlighted in the instrument cluster display. Push and release the right
arrow button to cycle the display between mph and km/h.
Driver Assist — If Equipped
The Driver Assist menu displays the status of the ACC system.
Push and release the up or down arrow button until the Driver Assist menu is displayed in the instrument cluster display.
Adaptive Cruise Control (ACC) Feature
The instrument cluster display displays the current ACC system settings. The information displayed depends on the ACC system status.
Push the ACC on/off button (located on the steering wheel) until one of the following displays in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read “Adaptive Cruise Control Off.”
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has not been selected, the display will read “Adaptive Cruise Control Ready.”
Push the SET + or the SET- button (located on the steering wheel) and the following will display in the instrument cluster display:
ACC SET
When ACC is set, the set speed will display in the instrument cluster.
The ACC screen may display once again if any ACC activity occurs, which may include any of the following:
- Distance Setting Change
- System Cancel
- Driver Override
- System Off
- ACC Proximity Warning
- ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the last display selected after five seconds of no ACC display activity.
LaneSense — If Equipped
The instrument cluster display displays the current LaneSense system settings. The information displayed depends on the LaneSense system status and the conditions that need to be met.
Vehicle Info
Push and release the up or down arrow button until the Vehicle Info menu item is highlighted in the instrument cluster display. Push and release the right
arrow button to enter the submenus items of Vehicle Info. Follow the directional prompts to access or reset any of the following Vehicle Info submenu items:
BASE AND MIDLINE CLUSTER
- Tire Pressure Monitor System
- Coolant Temperature — If Equipped
- Trans Temperature — If Equipped
- Oil Temperature
- Oil Pressure
- Exhaust Brake — If Equipped
- Boost Pressure — If Equipped
- Diesel Particulate Filter
- Fuel Filter Life — If Equipped
- Fuel Tank Levels — If Equipped
- Oil Life
- Battery Voltage — If Equipped
- Gauge Summary — If Equipped
- Coolant Temp
- Trans Temp
- Oil Temp
- Oil Pressure
- Engine Hours — If Equipped
PREMIUM CLUSTER
- Fuel Economy
- Average
- Current
- Range to Empty
- Gauge Summary
- Coolant Temperature — If Equipped
- Battery Voltage — If Equipped
- Trans Temperature
- Oil Summary
- Oil Temperature
- Oil Life
- Oil Pressure — If Equipped
- Tire Pressure Monitor System
- Diesel Summary
- Exhaust Brake — If Equipped
- Boost Pressure — If Equipped
- Fuel Filter Life — If Equipped
- Diesel Particulate Filter
- Fuel Tank Levels — If Equipped
- Engine Hours — If Equipped
Off-Road
Push and release the up or down arrow button until the Off-Road menu icon is displayed in the instrument cluster display. Push and release the left or right arrow button to scroll through the information submenus.
- Drivetrain
- Front Wheel Angle: displays the graphical and numerical value of the calculated average front wheel angle from the steering wheel orientation.
- Transfer Case Lock Status: displays “Lock” graphic only during 4WD High, 4WD High Part-Time, and 4WD Low status.
- Axle Lock And Sway Bar Status (If Equipped): displays front and rear or rear-only axle locker graphic, and sway bar connection graphic with text message (connected or disconnected).
- Pitch And Roll
- Displays the pitch and roll of the vehicle in the graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display the pitch and roll, “- -” will display in place of the numbers, and the graphic will be grayed out. A message indicating the necessary speed for the feature to become available will also be displayed.
Fuel Economy — If Equipped
Push and release the up or down arrow button until the Fuel Economy menu item is highlighted in the instrument cluster display. Push and Hold the right arrow button to reset Average Fuel Economy.
- Current Fuel Economy Gauge
- Average Fuel Economy Value
- Range To Empty
- Fuel Tank Levels — If Equipped
Trip A/Trip B
Push and release the up or down arrow button until the Trip menu item is highlighted in the instrument cluster display. Push and release the right arrow button to enter the submenus of Trip A and Trip B. The Trip A or Trip B information will display the following:
- Distance
- Average Fuel Economy
- Elapsed Time
Push and hold the right arrow button to reset all information.
Navigation — If Equipped
Push and release the up or down arrow button until the Navigation display title is highlighted in the instrument cluster display, “Hold OK to Start Route” will display when no active route is set. “Hold OK to Cancel Route” will display when the active route is set. Use the left or right arrow button to zoom in or out on the display.
Trailer Tow
Push and release the up or down arrow button until the Trailer Tow menu item is highlighted in the instrument cluster display. Push and release the right or left arrow button to cycle through the following trailer tow information:
- Trip (trailer specific) Distance: Push and hold the OK button to reset the distance.
- Integrated Trailer Brake Module (ITBM):
- Braking Output
- Trailer Type
- ITBM Gain
- Trailer Light Check: Push and hold the OK button to begin the Trailer Light Test sequence
For vehicles equipped with Blind Spot Monitoring (BSM):
- When a Trailer Brake signal is detected, a pop-up message will appear in the cluster requiring the user to select the trailer type.
- If a conventional trailer is selected, the BSM operation will function as normal.
- If the Gooseneck/5th Wheel trailer is selected BSM will be disabled due to the unsupported trailer type.
- If no selection is made, the BSM system will remain on until a selection is chosen.
NOTE:
Trailer connection status is remembered after the key cycle. If the trailer connection status has not changed, no pop-up will appear in your Instrument Cluster Display.
Audio
Push and release the up until the Audio Menu icon/title is highlighted in the instrument cluster display. This menu will display the audio source information, including the Song name, Artist name, and audio source with an accompanying graphic.
Phone Call Status
When a call is incoming, a Phone Call Status pop-up will display on the screen. The pop-up will remain until the phone is answered or ignored.
NOTE:
The call status will temporarily replace the previous media source information displayed on the screen. When the pop-up is no longer displayed, the display will return to the last used screen.
Stored Messages
Push and release the up or down arrow button until the Messages Menu item is highlighted. This feature shows the number of stored warning messages. Push and release the right or left arrow button to cycle through stored messages.
Settings — If Equipped
Personal Settings allows the driver to set and recall features when the transmission is in PARK. Push and release the up or down arrow button until Settings displays in the instrument cluster display.
Follow the prompts to display and set any of the following Vehicle Settings.
NOTE:
Your vehicle may be equipped with the following settings.
- If equipped with a base radio (Non-Touchscreen) Vehicle Settings will be included in the instrument cluster display.
- If equipped with a Touchscreen radio, the Vehicle Settings will be included in the radio head unit.
FAQs
Answer: The 2024 RAM 4500 Chassis Cab comes equipped with a state-of-the-art display setup, featuring an advanced infotainment system.
Answer: The display screen in the 2024 RAM 4500 Chassis Cab is a generous size, typically around 10 inches, providing a clear and easily accessible interface.
Answer: The main screen displays a variety of information, including navigation, audio controls, vehicle settings, and possibly even performance metrics.
Answer: Yes, the display is often customizable, allowing users to personalize the layout and prioritize the information that matters most to them.
Answer: Absolutely, it likely supports both Apple CarPlay and Android Auto, enabling seamless smartphone connectivity and integration with the infotainment system.
Answer: Yes, the display may show information related to advanced safety features such as lane departure warnings, collision alerts, and more.
Answer: Most likely, the 2024 RAM 4500 Chassis Cab includes a rearview camera with the display showing the live feed to assist with parking and maneuvering.
Answer: Depending on the model and setup, passengers may have limited or full access to certain features on the display.
Answer: Yes, the display is likely a touchscreen, allowing for intuitive and user-friendly interaction.
Answer: In many cases, climate control settings may be integrated into the main display for easy access and adjustment.
Answer: The design likely incorporates features such as voice control and steering wheel-mounted controls to minimize the need for the driver to physically interact with the display.
Answer: Yes, the infotainment system may include entertainment options such as streaming services, radio, and connectivity to external media devices.
Answer: Some models may offer an optional heads-up display, projecting essential information directly onto the windshield.
Answer: Software updates can be performed through over-the-air (OTA) updates or through manual updates using a USB drive.
Answer: Yes, to enhance visibility and reduce glare during nighttime driving, the display system likely includes a night mode or adjustable brightness settings.
Useful Link
View Full PDF: 2024 RAM 4500 Chassis Cab | Auto User Guide