2022-2023 Ducati XDiavel Dark Instrument Panel Quick Guide
The Ducati XDiavel Dark for the 2022-2023 model year presents a novel phase of rider connectivity and information with its advanced instrument panel. In addition to serving as a functional dashboard, the instrument cluster of this motorcycle exemplifies Ducati’s dedication to integrating innovative features with aesthetic appeal. The instrument panel of the XDiavel Dark serves the dual purpose of presenting crucial riding information and enhancing the overall riding experience by seamlessly integrating technology and design elements.
Located centrally within the instrument panel, there exists a high-resolution, full-color display which functions as the primary control hub for the rider. With a focus on clarity and functionality, this design provides a comprehensive overview of information, enabling the rider to remain well-informed and maintain control during their voyage. Moreover, the instrument panel functions as a conduit to the sophisticated electronics package, providing access to valuable information regarding the motorcycle’s safety mechanisms, connectivity alternatives, and diagnostic data. The instrument panel of the 2022-2023 Ducati XDiavel Dark provides riders with both control over a high-performance vehicle and access to a wide range of information, thereby revolutionising the riding experience for contemporary enthusiasts, whether they are traversing urban roads or embarking on long-distance journeys.
Instrument Panel (Dashboard)
Instrument Panel
- Display.
- NEUTRAL LIGHT N (GREEN).
Comes on when in neutral position. - CRUISE CONTROL LIGHT (GREEN).
Comes on to indicate operation of the Cruise Control. - HIGH BEAM LIGHT (BLUE).
It turns on to indicate that the high beam lights are on and when the flasher is activated. - FUEL WARNING LIGHT (AMBER YELLOW).
Comes on when fuel is low (see chapter “Top-ups”) - TURN INDICATOR LIGHTS (GREEN).
Illuminates and flashes when the turn indicator is in operation. - ENGINE OIL PRESSURE LIGHT (RED).
- Comes on when engine oil pressure is too low. It must turn on at “KEY-ON”, but must turn off a few seconds after the engine has started. It may shortly come on when the engine is hot, however, it should go out as the engine revs up.
Important
If the ENGINE OIL light stays ON, stop the engine or it may suffer severe damage.
DTC LIGHT (AMBER YELLOW).
This light indicates DTC system enabling/disabling status.
Speed below 5 Km/h (3 mph) | ||
Light OFF | Light flashing | Light steady on |
DTC enabled and functioning | DTC enabled but not yet function‐ ing since initialisation is in progress or functioning with degraded per‐ formance | DTC disabled and/or not function‐ ing due to a fault in the BBS control unit |
Speed above 5 Km/h (3 mph) | ||
Light OFF | Light flashing | Light steady on |
DTC enabled and functioning | DTC enabled but there is a fault in the system causing degraded performance | DTC disabled and/or not functioning due to a fault in the BBS control unit |
“ENGINE/VEHICLE DIAGNOSIS – MIL” LIGHT (AMBER YELLOW).
- The warning light turns steady on in case of error in engine management. Proceed slowly, avoid harsh acceleration and overtaking, take the vehicle to a Ducati authorised service centre to eliminate the malfunction.
- The warning light turns on flashing to warn about a critical emission-related error that could damage the catalytic converter. If possible, have the vehicle be taken to a Ducati authorised service centre and the malfunction eliminated and at any rate proceed slowly, avoid harsh acceleration and overtaking.
ABS LIGHT (AMBER YELLOW).Indicates ABS status.
Speed below 5 Km/h (3 mph) | ||
Light OFF | Light flashing | Light steady on |
– | ABS enabled but not yet functioning since initialisation is in progress or there is a fault of the IMU control unit | ABS disabled and not functioning due to a fault in the ABS control unit |
Speed above 5 Km/h (3 mph) | ||
Light OFF | Light flashing | Light steady on |
ABS enabled and functioning | ABS enabled but a fault is detected by the IMU control unit | ABS disabled and not functioning due to a fault in the ABS control unit |
GENERIC ERROR WARNING LIGHT (AMBER YELLOW).
It turns on when there are any “vehicle” errors, i.e. active errors triggered by any control unit other than the engine control unit.
OVER REV / DTC INTERVENTION /IMMOBILIZER SYSTEM (RED).
DTC | |
No intervention | OFF warning light |
Spark advance cut | Light steady ON |
Injection cut | Light steady ON |
Over rev | |
No intervention | OFF warning light |
First threshold (N RPM before the lim‐ iter kicks in) | Light steady ON |
Limiter | Light ON flashing |
Note
Each calibration of the Engine Control Unit may have a different setting for the thresholds that precede the rev limiter and the rev limiter itself.
Immobilizer | |
Key-ON status | OFF warning light |
Key-OFF status | Light ON flashing |
Key-off status for over 1 hour | OFF warning light |
13) DRL LIGHT (GREEN)
Indicates DRL lights status (not present in China and Canada versions).
DRL | |
Function not active | OFF warning light |
Function active | Light steady ON |
Function active but with an error | Light ON flashing |
Important
If the display shows the message
“TRANSPORT MODE”, immediately contact your Ducati Dealer that will delete this message and ensure the full operation of the motorcycle.
Parameter setting/displaying
Upon key-on, the instrument panel displays the DUCATI logo and switches on the LED warning lights in two steps (“initial check routine”).
At the end of the check, the instrument panel shows the main screen in the CORE mode which is the default one for all riding styles.
It is possible to change the display mode with the INFO MODE function in the Setting Menu.
During this first check stage, if the motorcycle speed exceeds 10 km/h (6 mph) (actual speed), the instrument panel will stop:
- The display check routine and display the standard screen containing updated information;
- The warning light check routine and leave ON only the warning lights that are actually active at the moment.
The main screen can have four different layouts: CORE, TRACK, FULL and CITY.
Data displayed on the main screen for CORE layout are as follows:
- Rev counter (RPM).
- Motorcycle speed.
- Gear indication.
- Set Riding Mode.
- Fuel level.
- Menu 1: Odometer, Engine coolant temperature, Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time, Ambient air Temperature.
- Bluetooth indication.
- DRL light status (Auto / Manual).
- DPL level indication (assisted start): active only during an assisted launch.
- Cruise Control indication.
- LAP.
Data displayed on the main screen for TRACK layout are as follows:
- Rev counter (RPM).
- Motorcycle speed.
- Gear indication.
- Set Riding Mode.
- DTC level.
- ABS level.
- Menu 1: Odometer, LAP Time (only if active), Engine coolant temperature, Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time, Ambient air Temperature.
- Cruise Control indication.
- Bluetooth indication.
- DRL light status (Auto / Manual).
- DPL level indication (assisted start): active only during an assisted launch.
- LAP.
Data displayed on the main screen for FULL layout are as follows:
- Rev counter (RPM).
- Motorcycle speed.
- Gear indication.
- Set Riding Mode.
- Fuel level.
- Clock.
- Menu 1: Odometer, Engine coolant temperature, Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected), Range, Trip meter 1, Trip meter 2.
- Menu 2: Average consumption, Instant fuel consumption, Average speed, Trip time, Ambient air temperature).
- Cruise Control indication.
- Bluetooth indication.
- Infotainment: Smartphone connected, Helmet 01 connected, Helmet 02 connected, Navigator connected.
- DRL light status (Auto / Manual).
- DPL level indication (assisted start): active only during an assisted launch.
- Infotainment: received message/s, missed call.
- LAP.
Data displayed on the main screen for CITY layout are as follows:
- Motorcycle speed.
- Gear indication.
- Set Riding Mode.
- Fuel level.
- Clock.
- Menu 1: Odometer, Engine coolant temperature, Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected), Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time, Ambient air temperature.
- Bluetooth indication
- Infotainment: Smartphone connected, Helmet 01 connected, Helmet 02 connected, Navigator connected, received message/s, missed call, Player + volume, incoming call, track name.
- DRL light status (Auto / Manual).
- Cruise Control indication.
From the main screen of the CORE mode, pressing button (1) on the left-hand switch allows displaying Menu 1 information.
- Odometer;
- Engine coolant temperature;
- TRIP 1;
- TRIP 2;
- RANGE;
- Average Fuel Consumption (CONS. AVG);
- Instant fuel consumption (CONS);
- Average speed (SPEED AVG);
- Trip time (TRIP TIME);
- Air temperature (T-AIR).
From the main screen of the TRACK mode, pressing button (1) on the left-hand switch allows displaying Menu 1 information.
- Odometer;
- LAP time (only if active);
- Engine coolant temperature;
- TRIP 1;
- TRIP 2;
- RANGE;
- Average Fuel Consumption (CONS. AVG);
- Instant fuel consumption (CONS);
- Average speed (SPEED AVG);
- Trip time (TRIP TIME);
- Air temperature (T-AIR).
From the main screen, with CITY layout, press button (1) on LH switch to view Menu 1 information.
- Odometer;
- Engine coolant temperature;
- Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected)
- TRIP 1;
- TRIP 2;
- RANGE;
- Average Fuel Consumption (CONS. AVG);
- Instant fuel consumption (CONS);
- Average speed (SPEED AVG);
- Trip time (TRIP TIME);
- Air temperature (T-AIR).
For the FULL display mode, the instrument panel stores Menu 1 and Menu 2 settings in use upon KEY-OFF. Upon the following KEY-ON, the previously stored Menu 1 and Menu 2 screens are displayed. In case of sudden and unexpected power off, the instrument panel displays the Menu 1 and Menu 2 default settings upon the following KEY-ON:
- Menu 1 default page = TOT (Odometer);
- Menu 2 default page = RANGE.
For the CORE, TRACK and CITY display modes, the instrument panel stores Menu 1 settings in use upon KEY-OFF. On the following KEY-ON, previously stored Menu 1 page is displayed.
In case of sudden and unexpected power OFF, the instrument panel displays the default settings for Menu 1 upon the following KEY-ON; in particular:
- Menu 1 default page = TOT (Odometer).
When the standard screen of set layout is displayed, hold button (4) for 2 seconds to enter the Setting menu, where you can set any function.
Note
You can enter the SETTING MENU only if vehicle actual speed is <= (lower than or equal to) 5 km/h (3.1 mph). Within the SETTING MENU, if vehicle actual speed exceeds 5 km/h (3.1 mph), the instrument panel automatically quits the menu and shows the Standard Screen.
If the key is not acknowledged upon Key-On and once the check routine is over, if the PIN CODE function is active the instrument panel shows a screen where it is possible to enter the release PIN CODE. Use button (1) and button (2) to enter the code digit and confirm by pressing button (4).
Main Functions
Information displayed in the standard screen of the selected display layout (CORE, TRACK, FULL or CITY) are the following:
Main information
- Engine rpm indication (RPM)
- Motorcycle speed
- Fuel level
- Riding Mode
- ABS
- DTC
- Gear
- Clock
The menus display the following functions:
-
- Odometer (TOT)
- Engine coolant temperature
- Residual range (RANGE)
- Trip meter 1 (TRIP1)
- Trip meter 2 (TRIP2)
- Trip time (TRIP TIME)
- Instantaneous fuel consumption (CONS)
- Average Fuel Consumption (CONS. AVG)
- Average speed (SPEED AVG)
- Ambient air temperature
- LAP time
- LAP time (only if active)
- Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected)
Additional information
- DRL status
- DPL level
- Infotainment — Bluetooth
- Cruise Control
- Service indication (SERVICE)
- Warnings/Alarms
FAQs
The XDiavel Dark Keys motorcycle uses cutting-edge technology, such as an upgraded electronics package, to seamlessly interact with the rider and provide an enhanced experience.
Useful Link
View Full PDF : Ducati XDiavel Dark 2022-2023 User Manual Auto User Guide
2022-2023 Ducati XDiavel Dark Warnin g and Indicators Guide