2023 Ducati Monster Instrument Panel Quick Guide
The 2023 Ducati Monster Instrument Panel is an epitome of contemporary engineering, seamlessly integrating sophisticated digital functionalities with an aesthetically pleasing, minimalist design that is indelibly associated with Ducati. Upon initial observation, one will be enthralled by the seamless integration of innovation and elegance.
In summary, the 2023 Ducati Monster Instrument Panel exemplifies Ducati’s dedication to pioneering advancements in the realm of motorcycles and is a masterpiece. It not only furnishes the requisite information but also revolutionises your interaction with your bicycle, thereby enhancing your overall cycling experience. Anticipate to be mesmerised by the convergence of sophistication and technology as you commence your expedition aboard the 2023 Ducati Monster.
Instrument Panel (Dashboard)
Instrument panel
The motorbike is equipped with an instrument panel featuring a TFT colour display.
The instrument panel provides all the information needed for safe driving and allows you to customise the vehicle settings and parameters.
Warning lights
| no. | Description | Colour |
| 1 | Rev limiter / immobilizer | Red |
| 2 | Rev limiter | Red |
| 3 | Low fuel | Amber yellow |
| 4 | Turn indicators | Green |
| 5 | DRL – daytime riding lights on (not present in China and Canada versions) | Green |
| 6 | DTC/DWC status
|
Amber yellow |
| 7 | Engine oil low pressure Important If the ENGINE OIL light stays ON, stop the engine or it may suffer severe damage. |
Red |
| 8 | Low battery charge level | Red (display) |
| 9 | Generic error | Amber yellow (display) |
| 10 | Neutral gear | Green |
| 11 | ABS status
|
Amber yellow |
| no. | Description | Colour |
|
|
on: ABS disabled and/or not functioning due to a fault in the ABS control unit. | |
| 12 | Side stand | Red (display) |
| 13 | High beam on | Blue |
| 14 | MIL
|
Amber yellow |
| 15 | DTC/DWC intervention | Amber yellow |
Important
If the display shows the message “TRANSPORT MODE”, immediately contact your Ducati Dealer that will delete this message and ensure the full operation of the motorcycle.
Upon key-on, the instrument panel displays the Ducati logo and carries out a sequential check of the LED warning lights.
After this routine, the instrument panel displays the main page in the mode in use before last Key-Off.
During this check stage, if the motorcycle speed exceeds 5 km/h (3 mph), the instrument panel will stop:
- Main page items
The main screen displays all the information and elements needed for riding.
It is possible to change units of measurement through the “Measurement units” function in the “Setting menu” (page 170)
The table lists the available items.
| no. | Description |
| 1 | Interactive menu |
| 2 | Info display |
| 3 | Speed It is displayed increased by 5% and together with the set unit of measurement (km/h or mph). |
| 4 | Fuel level Available in 2 modes: graduated bar or km or miles remaining. It is possible to set it through the “Fuel indicator” function in the “Setting menu” |
| 5 | Riding Mode in use Refer to “Riding Mode” |
| 6 | Clock It is possible to set it through the “Date and time” function in the “Setting menu” |
| 7 | Gear |
| 8 | Parameters window
It displays the values of the DQS, DTC, ABS, DWC parameters set for the current Riding Mode. In case of errors on one or more parameters, “Err” is displayed instead of the relevant value. The window disappears when the motorcycle speed exceeds 5 km/h (3 mph) or when the heated handgrips (page 118) are activated. |
| no. | Description |
| 9 | Engine Coolant temperature (°C or °F) The temperature display range goes from +40 °C to +120 °C (+104 °F ÷ +248 °F). If the temperature is below +40°C (+104°F), “LO” is displayed, whereas if it is above +120 °C (+248 °F), “HI” is displayed flashing red. Attention In case of overheating, if possible, it is recommended to ride at reduced speed to allow the cooling system to lower the engine temperature. If this is not possible due to traffic conditions, stop and turn the engine off. If the motorcycle continues to be used when the engine is overheated, severe damage may occur. When the engine temperature returns to normal, continue riding by frequently checking the in‐ strument panel indication. |
| 10 | Rev counter Refer to “Engine rpm indication” |
| 11 | Air temperature (°C or °F) Note When the motorcycle is stopped, the engine heat could influence the displayed temperature. |
Interactive menu and Info display
The “Interactive Menu” contains a series of functions that can be activated by the rider. When a function is activated, a corresponding window is displayed with which you can interact.
The “Info display” menu includes all counters referred to available trip information (see page 108)
When one of the menus is selected, it is indicated with the active frame (A,Fig 67) and buttons (1), (2) and (3) are used for menu navigation and interaction. To toggle the selection between “Interactive menu” and “Info display” and vice versa:
- If “Interactive menu” is currently selected, long press and hold button (2) to move the selection to “Info display” (C, Fig 67);
If “Info display” is currently selected, long press and hold button (1) to move the selection to “Interactive menu” (B, Fig 67).
Buttons (1) and (2) are mainly used to scroll and select items in the selected menu. Button (3) is used to activate and interact with the selected menu item. The left part of the menus shows the following symbols indicating the possible interaction of buttons (1), (2) and (3):
- Short press of button (1);
Short press of button (2);
Short press of button (3);
Long press of button (1);
Long press of button (2);
Long press of button (3).
Riding Mode
3 Riding Modes are available: SPORT, TOURING, URBAN.
The name of the active Riding Mode is shown at the centre of the display (A, Fig 68).
Each Riding Mode is associated with a different colour for the name and rev counter box.
The parameters associated to each Riding Mode are: Engine, DTC, ABS, DWC, DQS.
For each Riding Mode it is possible to customise the parameters using the “Riding Mode” function in the “Setting menu”
- Changing Riding Mode
- Note
If the “Rally” screen is active, make sure that the Trip master function is selected.
Press and hold the MODE/ENTER button (3) for a long time.
The dedicated screen is displayed (Fig 70) where, using buttons (1) and (2), it is possible to scroll through the available Riding Modes and display the parameters with the relevant set values.
Press the MODE/ENTER button (3) to confirm.
If speed is lower than or equal to 5 km/h (3 mph) and throttle control is open, the message “Close throttle” is displayed; the new Riding Mode is confirmed and stored only when throttle control is closed and then the main screen is displayed.
If speed is lower than or equal to 5 km/h (3 mph), throttle control is closed but brakes are actuated, the message “Release brakes” is displayed. The new Riding Mode is confirmed and stored only when brakes are released and then the main screen is displayed.
- If both of the above conditions occur, the message “Close throttle and release brakes” is displayed. The new Riding Mode is confirmed and stored only when both conditions are satisfied and then the main screen is displayed.
If either of the conditions required to validate the change of Riding Mode are not true within 5 seconds from activation of one of the above-described conditions, the procedure will be aborted, the instrument panel will go back to displaying the main page and no settings will be changed.
Attention
Ducati recommends changing the Riding Mode when the motorcycle is stopped. If it is changed while riding, be very careful (it is recommended to change the Riding mode at a low speed).
Engine rpm indication
The engine rpm is displayed using a rev counter featuring a grey wake (A).
During the first 1000 km (600 mi) of the odometer (vehicle running-in period), or up to the first service, a virtual engine rpm limiter is set and is indicated when the wake becomes amber yellow.
After the break-in period or after the first inspection, the virtual limiter indicates and advises the rider to ride at lower revs when the engine is cold. The virtual limiter threshold changes according to engine temperature: if the engine temperature is below 50 °C (122 °F), the rpm threshold is 7000 rpm.
When the wake becomes amber yellow and starts blinking, the instrument panel is warning the rider to shift up.
The wake becomes flashing red when the rev limiter trips: in this case the rev limiter (page 95) turns on, too.
If the number of rpm is lower than 1,000 rpm, the wake is not displayed.
- Attention
Your motorcycle is equipped with a rev limiter which limits the engine speed to approximately 3000 rpm when the engine is in neutral with the clutch released. This is to prevent excessive noise pollution and also to avoid reaching engine speeds that are harmful to the engine without load. When this limiter comes into operation the revs will be limited and there will be a flashing Overrev indication on the instrument panel. When the clutch is pulled, this function is not active.
FAQs
The 2023 Ducati Monster is equipped with a TFT instrument panel that is high-resolution and full-color.
Information including speed, engine data, riding modes, and connectivity features are presented on the instrument panel.
In many cases, it is possible to modify the display layout and establish a hierarchy of information according to personal preferences.
The TFT display provides exceptional visibility under diverse lighting conditions, encompassing both intense sunlight and dimly illuminated environments.
Although the instrument panel is constructed with durability in mind, it is prudent to shield it from extended exposure to severe weather or heavy precipitation.
Such functionality is available on the 2023 Ducati Monster. Users can pair their device to gain access to navigation apps, messages, and phone conversations.
For increased convenience and safety, smartphone connectivity improves the cycling experience by allowing you to remain connected while maintaining your concentration on the road.
Indeed, it is common for the instrument panel to feature a variety of riding modes that enable the customization of the performance attributes of the bicycle to correspond with distinct riding circumstances.
Typically, the process of transitioning between riding modes can be accomplished by utilising the menu or controls located on the instrument panel, as specified by the manufacturer in the owner’s manual.
“In response, answer:” Indeed, it provides real-time engine diagnostics and notifies the user of any critical issues.
Numerous contemporary instrument panels feature an adjustable brightness setting or a night mode to guarantee optimal nighttime visibility.
On the instrument panel, one can typically observe fuel levels, voyage information, and other relevant data.
Certain instrument panels feature maintenance schedules and reminders, which guarantee that critical servicing intervals are not overlooked.
Please provide the resolution of the TFT display found on the 2023 Ducati Monster. Although the resolution may differ, it is generally high-definition, guaranteeing images that are distinct and vivid.
The instrument panel is typically not a touch screen; rather, physical knobs or controls are utilised to access its functions.
Useful Link
View Full PDF : Ducati Monster 2023 User Manual| Auto User Guide
2023 Ducati Monster Seat Setup Instructions