Fixing Fuse: 2024 Ducati Multistrada V2S Fuse Diagrams Guide

Fixing Fuse: 2024 Ducati Multistrada V2S Fuse Diagrams Guide

The 2024 Ducati Multistrada V2S is a cutting-edge adventure touring motorcycle that seamlessly blends performance, technology, and style. With its powerful engine and advanced features, it offers riders an exhilarating experience on both paved roads and off-road terrain. To ensure the smooth functioning of the electrical components on this sophisticated machine, it is crucial to understand the fuses and fuse box system. The fuse box in the 2024 Ducati Multistrada V2S is a critical component that protects the electrical circuits from overloads and potential damage. Fuses act as safety devices that interrupt the flow of electricity when there is a fault, preventing further damage to the motorcycle’s electrical system. Regular maintenance and occasional checks of the fuses are essential to ensure the optimal performance of your Ducati. Use the motorcycle’s manual to identify the specific fuse that needs replacement. The manual will provide information on the purpose and rating of each fuse, helping you pinpoint the faulty one.

2023 Ducati Multistrada_V4 Specs, Price, Mileage And Review

Fuses and Fuse Box

Electric system

Basic electric items are:
Instrument panel 5″ color TFT display.

• Battery: sealed-type, 12V – 10 Ah.
• Generator: 14V – 490W – 35A.
• Starter motor: 12V – 0.7kW.
• Preset for anti-theft system.

Headlight

• LED low beam: No.2 LEDs.
• LED high beam: No.8 LEDs
• LED cornering light: 2 LEDs.
• LED parking light: 2 LEDs.

Turn indicators
Front ones (Europe / USA), LED units. Rear ones (Europe), LED units.

Rear ones (USA), bulb units: No. 1 bulb RY10W 12V -10W amber.

Tail light

• LED parking light: No.2 LEDs.
• LED stop light: NO.10 LEDs.
• LED number plate light: No.3 LEDs.

Fog lights
LED fog lights (Enduro customization): No.1 LED.

Fuses

Twelve fuses protect the electric components, located inside the front and rear fuse boxes and one on the solenoid starter. There is a spare fuse in every box. The front fuse box (A), is located inside the left panel and can be reached by removing the inspection cover. To expose the fuses, lift the box protective cover. Mounting position and ampere capacity are marked on the box cover. Three spare fuses (7.5 A, 15 A, and 25 A) are positioned at the side. The rear (B) and the ABS (C) fuse boxes are located on the rear subframe right-hand side, next to the ABS control unit. To reach the rear and ABS fuse boxes, remove the rider seat, see “Seat lock”. To expose the fuses, remove the box protective cover. Mounting position and ampere capacity are marked on the box cover. Three spare fuses (10 A, 15 A, and 25 A) are positioned at the side.

Front fuse box key (A)
Pos.	El. item	Rat.
1	KEY EMS / ABS / IMU	5 A
2	KEY2 DASH/BBS	15 A
3	KEY Lights	15 A
4	–	–
5	KEY Accessories	10 A
6	Hands-Free KEY	25 A
Front fuse box key (A)
7	+30 Diagnosis/charge	7.5 A
Rear fuse box key (B)
Pos.	El. item	Rat.
1	EMS LOAD Relay	25 A
2	FUEL PUMP relay	10 A
3	Starter Relay	7.5 A
4	Instrument panel	10 A
5	Black Box System (BBS)	10 A
6	ABS UBMR	25 A
7	ABS UBVR	15 A

The main fuse (C) of 30A is positioned on the solenoid starter. Remove the fuse cap to reach it. A blown fuse can be identified by breakage of the inner filament (F).

Important
Switch the ignition key to OFF before replacing the fuse to avoid possible short circuits.

Attention
Never use a fuse with a rating other than specified. Failure to observe this rule may damage the electric system or even cause a fire.

How to Replace Ducati Multistrada V2S Fuses

Certainly! Here’s a detailed guide on how to replace fuses on a Ducati Multistrada V2S:

1. Locate the Fuse Box: The fuse box on a Ducati Multistrada V2S is typically located under the rider’s seat or near the battery compartment. Look for a small black box with a removable cover.

2. Turn Off the Motorcycle: Ensure that the motorcycle is turned off completely, and the key is removed from the ignition to avoid any electrical mishaps.

3. Remove the Rider’s Seat: Release the seat latch or unscrew bolts to remove the rider’s seat and access the fuse box.

4. Identify the Blown Fuse: Visually inspect the fuses to identify the one that is blown. A blown fuse typically has a broken metal strip or appears discolored compared to intact fuses.

5. Remove the Blown Fuse: Use needle-nose pliers to grip the blown fuse firmly and pull it straight out of its socket. Be gentle to avoid damaging the fuse or the fuse box.

6. Install the New Fuse: Carefully insert the new fuse into the empty socket, ensuring it fits snugly and is seated properly. Avoid forcing the fuse into place to prevent damaging the contacts.

7. Replace the Fuse Box Cover: Securely reattach the cover to protect the fuses from dust and moisture.

8. Reinstall the Rider’s Seat: Position the rider’s seat back in place and secure it by reattaching the seat latch or tightening the bolts.

9. Test the Electrical System: Turn the ignition key to the “ON” position and test the electrical system to ensure the component associated with the replaced fuse is functioning properly.

Tips:

• Keep spare fuses of various amperages in your motorcycle’s toolkit for emergencies.
• Handle fuses delicately to avoid damaging them or the fuse box.

FAQs

Useful Links

View Full PDF: 2024 Ducati Multistrada V2S User Manual| Auto User Guide

2023 Ducati Multistrada_V4 Specs, Price, Mileage And Review

2024 Ducati Multistrada V2S Instrument Cluster Guide