Ducati Monster 2023

The Ducati Monster 2023 is a legendary naked sport motorbike that embodies raw power, aggressive styling, and exhilarating performance. With its unique look and powerful stance, the Monster stands out and gives off an air of wild energy. The Monster has a high-performance engine that gives it quick acceleration and precise handling, which makes every ride a rush of energy. Its light frame, advanced suspension, and responsive brakes give riders the best control and agility, so they can confidently take turns. With a focus on rider comfort and ergonomics, the Monster has a comfortable seating position, easy-to-use controls, and modern technology like a digital instrument panel and LED lighting. The Monster 2023 combines the thrill of speed, the beauty of Italian design, and the precision of engineering to make a motorbike that really brings out the beast in riders and sets new standards in the world of naked sport bikes.

Infotainment

Infotainment (if any)
If the Bluetooth control unit is installed, the infotainment system is activated.
The Monster’s infotainment system allows devices such as smartphones, rider and passenger helmet intercoms and satellite navigators to be connected via Bluetooth, allowing incoming and outgoing phone calls to be managed and music on the smartphone to be played.

• For pairing and managing Bluetooth devices, see page 22.
• For managing phone calls, see page 28.
• For managing the music player see page 32.

Bluetooth device pairing and management (if any)
This function is available only if the Bluetooth control unit is installed and allows the user to manage any paired Bluetooth devices and add more.

• Use buttons (1) and (2) from the Interactive Menu to select the “Setting menu” item and press ENTER (3).
• Select the “Bluetooth” item and press ENTER (3).
  “Pairing” are “Paired devices” are displayed:
• “Pairing” allows pairing a new Bluetooth device.
• “Paired devices” allows viewing and erasing paired devices.
  Use buttons (1) and (2) to scroll and select the desired item. Press ENTER (3) to confirm.

Pairing
This function allows pairing a new Bluetooth device. The instrument panel manages 4 types of Bluetooth devices and a maximum of 5 devices paired and/or connected: 2 smartphones, 1 rider earphone, 1 passenger earphone, 1 navigator. If you want to pair a new smartphone, earphone or navigator it is necessary to first disconnect one of the corresponding devices already paired (see section “Paired devices”).

Note
Before pairing a new device, make sure that its Bluetooth connection is active and that it can be detected by other Bluetooth devices. Always refer to the provisions under the device instructions.

Note
During the pairing procedure, user may be required to confirm it directly on the device (e.g. smartphone). Refer to the device messages.

• Use buttons (1) and (2) from the Interactive Menu to select the “Setting menu” item and press ENTER (3).
• Select the “Bluetooth” item and press ENTER (3).
• Select the “Pairing” item and press ENTER (3)(Fig 2).

The list of the 4 types of devices that can be managed from the instrument panel (Fig 3) is displayed. Select type of device to be paired and press ENTER button.
With buttons (1) and (2) select the type of device, you wish to pair. Press ENTER (3) to confirm and start the device search.
The instrument panel starts searching for nearby Bluetooth devices and displays the message
“Wait…” followed by a list of detected devices (Fig 4). As soon as the search stage is over, the system gives out a list of all detected devices.
Use buttons (1) and (2) to select the required device and press ENTER button (3).
The display shows the message “Pairing…” on the right while waiting for validation by the Bluetooth device.
If the pairing of the device has been successful, the message “Paired” is displayed on the right for a few seconds and then the instrument panel returns to the previous menu. If not, the message “Pairing Error” is displayed and user is allowed to repeat the pairing procedure.

Paired devices
This function allows viewing and erasing paired Bluetooth devices.
A maximum of 2 smartphones, 1 rider earphone, 1 passenger earphone, 1 navigator can be paired up.

• Use buttons (1) and (2) from the Interactive Menu to select the “Setting menu” item and press ENTER (3).
• Select the “Bluetooth” item and press ENTER (3).
• Select the “Paired devices” item and press ENTER (3) (Fig 2).

The paired devices are listed. Press buttons (1) and (2) to select the desired device and press ENTER (3). The message “Delete?” is shown on the right.
(Fig 6)Press ENTER (3) to delete the selected device from the list: the message “Wait…” is displayed for a few seconds and then the list of paired devices is updated.

Note
If there are no paired devices, the message No Device is displayed.

Attention
Smartphone and Bluetooth Headset device manufacturers may incorporate certain changes within the standard protocols over the course of the lifecycle of the device (Smartphones and Earphones).

Attention
These changes are outside the control of Ducati and may result in Smartphone and Bluetooth Headset device’s functionality becoming impaired (sharing Music, multimedia player, etc.) and may equally affect some types of Smartphones
(depending on supported Bluetooth profiles). This is why Ducati cannot guarantee the multimedia player proper operation for:

1. the entire range of headphones and Smartphones available on the market;
2. Smartphones that do not support the required Bluetooth profiles.
   Check that your Smartphone supports the following profiles:

• MAP profile: for a correct display of SMS and MMS notifications;
• PBAP profile: for a correct display of the Smartphone contact list.

Paired Bluetooth device icons
Once paired, Bluetooth devices are displayed as follows:

1.  smartphone connected;
2. rider helmet intercom connected;
3. passenger helmet intercom connected;
4. rider helmet intercom is connected and the passenger helmet intercom is associated;
5. passenger helmet intercom is connected and rider helmet intercom is associated;
6. passenger helmet intercom connected and rider helmet intercom associated;
7. rider and passenger helmet intercom connected;
8. satellite navigator connected.
   Icons are black in the “day” mode or white in the
   “night” mode when the corresponding device is connected via Bluetooth. They are grey if the corresponding device is paired but not connected. To change the “day” or “night” display mode, refer to the chapter “Setting menu – Backlight” (page 149). If a smartphone is connected to the instrument panel, the system allows managing the music player, the list of the last calls and receiving or making phone calls. Refer to the chapters “Phone” (page 32) and “Music” (page 32).

Phone (if any)
This function is available only if the Bluetooth control unit is installed and can be found in the Interactive Menu: it displays the list of the last missed, made or received calls and can only be selected if a smartphone has been connected via Bluetooth.
For the Bluetooth pairing procedure, refer to the sub-section “Bluetooth device pairing and management” (page 22).

• Select the Interactive Menu (A, Fig 8) by pressing and holding button (1) pressed for a long time.
• Use buttons (1) and (2) to select item “Phone” (B, Fig 8)and press the ENTER button (3).

The relevant window (C, Fig 10) is shown listing the last 7 calls made, received or missed. If a number or contact is present several times among the last calls, this is displayed only once.
Use buttons (1) and (2) to scroll through the calls in the list. Press ENTER (3) to make a call to the number or contact selected in the list.
To close the window, press and hold button (1) for a long time.

Incoming call
When you receive a call, a window is shown with the name or number of the caller as well as the items “Accept” and “Decline” (D, Fig 11).
In this case, shortly press the ENTER button (3) to select the “Accept” or “Decline” item, press the ENTER button (3) for a long time to perform the action of the selected item.

Call in progress
When a call is in progress, a window is shown with the name or number of the contact as well as the item “End call” (E, Fig 11). To end the call, press the ENTER button (3).

Call back
At the end of a call or after declining an incoming call, the window (F, Fig 11)will be displayed for 5 seconds with the name or number of the contact and “Call back”: press ENTER button (3) to start the call.

Note
The music player will be paused during a call.

Missed call
In case of a missed call, the display will show the symbol (G, Fig 12)for 60 seconds, flashing for the first 3 seconds.

Note
The number of missed calls is not displayed.
Message received
In case of a received message, the display will show the symbol (H, Fig 13)for 60 seconds, flashing for the first 3 seconds.

Note
The number of received messages or e-mails is not displayed.

Music (if any)
This function is available only if the Bluetooth control unit is installed and can be found in the Interactive Menu: it allows activating, deactivating and managing the music player and can be selected only if a smartphone has been connected via Bluetooth.
For the Bluetooth pairing procedure, refer to the sub-section “Bluetooth device pairing and management” (page 22).

• Select the Interactive Menu (A, Fig 14) by pressing and holding button (1) pressed for a long time.
• Use buttons (1) and (2) to select item “Music” (B, Fig 14)and press the ENTER button (3).
  Note
  Music is played on the smartphone connected via Bluetooth. If the rider and passenger intercoms are also connected to the instrument panel the music is played through the intercoms.

Useful Link

Download link: https://www.ducati.com/ww/en/service-maintenance/owner-manuals