Ferrari 458 SPIDER Seats Quick Guide
The Ferrari 458 Spider, an enduring symbol of automotive excellence, not only captivates with its unparalleled performance, but also envelops its passengers in the seat of luxury and comfort. In this introduction, we enter the world of Ferrari 458 Spider seats, where meticulous craftsmanship and ergonomic design redefine the driving experience. As soon as you settle into the driver’s or passenger’s seat of the Ferrari 458 Spider, you are greeted by a synthesis of form and function. These seats are more than just places to sit; they are thrones that elevate every aspect of your voyage. In this exploration, we will delve into the artistry and engineering behind the Ferrari 458 Spider seats, uncovering their ergonomic contours, luxurious materials, and customizable options that accommodate to the desires and needs of every discerning driver and passenger.
These seats are your gateway to an unforgettable experience, whether you’re embarking on an exhilarating open-top drive or cruising through the city in luxury. Join us as we explore the world of Ferrari 458 Spider seats, where comfort meets performance, craftsmanship meets innovation, and the pleasure of driving begins with the ideal seat.
Seats
Warning Never adjust the seat while driving; you may lose control of the vehicle. Adjust the driver’s seat only when the vehicle is stationary. Correct adjustment is very important for enhanced driving comfort and maximum efficiency of the passive safety systems.
Basic Seat
The seat position can be adjusted using the special controls. Backward/forward adjustment
Pull lever B up and slide the seat forward or backward to the desired position. Release the lever and “wiggle” in the seat to check that it is locked in place.
Warning The backward/forward adjustment must consider the fact that airbag devices are placed in front of the driver and the passenger . Correct adjustment ensures there is adequate space between the airbag and the driver/passenger.
Seat back rake adjustment
Turn knob C clockwise or counterclockwise until it reaches the required position. Tilting the backrest
To tilt the seat, pull lever L up and push the backrest towards the front of the vehicle. When the backrest goes back into position, it will automatically block once it has reached the correct position. For further information on basic seat adjustment.
Electrically-adjustable seat (optional)
For further information on adjustment of the optional electrically-adjustable seat, .
Super Racing seat (optional)
For further information on adjustment of the optional Super Racing seat.
Steering Wheel
The steering wheel can be electrically adjusted for rake and reach. It can only be adjusted if the ignition key is in position II. Move control A (to the left of the steering column) in the four directions to adjust the steering wheel. The position of the steering wheel is memorised together with the position of the external rear view mirrors when the driver’s seat position is memorised (only if memorization is available).
Warning
Do not adjust the steering wheel when the vehicle is moving.
Rear-View Mirrors
Internal electrochromic mirror (optional)
Hold the internal rear-view mirror and move it to the required position. On request, the internal rear-view mirror can be fitted with an electrochromic mirror that automatically darkens to reduce the dazzling effect of the reflected light on the driver. The speed with which the mirror darkens depends on the intensity of the light. By pressing button B you can activate/deactivate the electrochromic mode. When the electrochromic mode is activated, the green LED D comes on.
External rear-view mirrors
These mirrors can be electrically adjusted using the control C (with the ignition key in position II) and are equipped with defogging elements.
- Mirror selection: turn control C to the left or right lock position to select the mirror that requires adjusting.
- Mirror positioning: move control C in the four directions (up – down – right – left) to adjust the selected mirror.
- Mirror closure (optional): turn control C to the lower central lock position to close the rear-view mirrors.
Once adjusted, move the control C into the upper central position where it will be locked in order to avoid changing the external mirror setting inadvertently. The mirrors will yield in both directions in the event of a collision: if necessary, the mirrors can be pushed both backwards and forwards.
Warning
The rear-view mirrors must always be positioned correctly while driving. Do not adjust the rear-view mirrors when the vehicle is moving. Warning
The seat belts must be properly adjusted and fastened at all times. Correct use of the seat belts can reduce the risk of serious injury in the event of an accident or if the vehicle overturns.
Fastening the seat belts
After positioning the seat correctly: Grip the latch plate A, slowly pull the belt and insert the latch plate into the buckle B (if the belt locks while you are pulling it out, let it wind back a little and pull it out again without jerking it). Make sure that it has clicked into the locked position: hold the belt and pull it to check that the latch plate has been inserted correctly. Position the seat belt correctly. If the driver’s seat belt is not fastened, when you turn the ignition key to position II, the warning light on the instrument panel illuminates and remains lit as long as the seat belt is not fastened.
Unfastening the seat belts
Push the release button E. Guide the latch plate A back to its rest position.
Warning Do not allow children to be held on a passenger’s lap using only one seat belt for both of them. For further information, refer to the “Safety”.
Ignition switch
The ignition key can be turned to 2 positions:
Position 0 – Stop
Engine off, key removable. When the key is even only partially extracted, the steering column is locked. The hazard warning lights and parking lights can be activated. To facilitate steering wheel release, turn the steering wheel slightly clockwise or counterclockwise while turning the ignition key.
Position II – Start When the key is turned to this position (key-on) the signals generated by the vehicle systems are checked. The left and right TFT displays are activated on the instrument panel and when the signals have been checked, the gearbox display comes . Warning Never remove the key when the vehicle is moving! The steering wheel will lock with the first turn of the steering wheel. Always remember to remove the key from the ignition when you get out of the vehicle! Never leave children unattended in the vehicle.
Key lock
If more than 20 seconds elapse after turning the key to position 0, the key lock device must be released to remove the key: press button K and remove the key at the same time.
FAQs
Useful Link
View Full PDF : Ferrari 458 SPIDER User Manual| Auto User Guide
Standard equipment for the Ferrari 458 Spider includes sporty and comfortable leather seating.
Yes, seats are typically height- and recline-adjustable to accommodate various body types.
Due to the open-top nature of the vehicle, some Ferrari 458 Spider variants offer optional heated seats, but cooling functions are less common.
Ferrari offers a variety of customization options, allowing you to choose the upholstery material, colors, and embroidery to your specifications.
Yes, Ferrari’s seats are designed with long-distance comfort in mind, making them suitable for lengthy trips.
Yes, modern Ferrari models are equipped with sophisticated safety features, such as seat-integrated airbags.
Yes, the seats of the Ferrari 458 Spider are designed with bolsters and contours that provide superb lateral support during high-speed cornering.
For those who prefer a more track-oriented driving experience, Ferrari offers optional racing-style seating.
Certain models may include memory settings that enable multiple drivers to save their preferred seat positions.
Depending on model year and region, the Ferrari 458 Spider may have infant seat LATCH anchors.
The seats have a variety of recline positions, but due to safety concerns, they cannot recline completely flat.
It is possible to retrofit seats from other Ferrari models, but customization and professional installation may be required.
Ferrari seats are designed for performance and sportiness, and massage functions are not typically included.
Ferrari recommends cleaning the seats with a damp, soft cloth and a high-quality leather conditioner to preserve their attractiveness and durability.
Ferrari offers official seat covers and protectors designed to preserve the appearance and quality of their seats.
sfsfsfsf