2018 Fiat 500X Owner’s Manual

The 2018 Fiat 500X brought Italian style and flair to the subcompact crossover SUV market, which is growing quickly. It had a unique, young design that was also useful and flexible. As a bigger version of the famous Fiat 500, the 500X had room for five people and a large trunk. The 2018 500X had an option of fuel-efficient engines, including a 1.4-liter MultiAir Turbo and a 2.4-liter Tigershark engine, which gave it a lively ride and decent gas mileage. Inside, the cabin had user-friendly technology like the Uconnect infotainment system with a 7-inch touchscreen, Apple CarPlay and Android Auto compatibility, and a variety of available safety features. This made the 2018 Fiat 500X a stylish and practical choice for city explorers and crossover fans alike.

KEYS

Key Fob With Remote Control
The key fob with Remote Control contains a Remote Keyless Entry feature. The Remote Keyless Entry system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a handheld key fob. The key fob does not need to be pointed at the vehicle to activate the system.

Key Fobs
Key Fob Emergency Key Release

1. Emergency Key Release Button
2. Emergency Key

To Unlock The Doors And Liftgate
Push the interior door unlock button on the door panel. Push and release the unlock button on the key fob once to unlock the driver’s door or twice within five seconds to unlock all doors and the liftgate. All doors can be programmed to unlock on the first push of the unlock button. Refer to “Uconnect Settings” in “Multi-media” for further information.
NOTE: If the vehicle is unlocked by a key fob, and no door is opened within 60 seconds, the vehicle will re-lock and if equipped, the security alarm will arm. To change the current setting, refer to Uconnect Settings in Multimedia for further information.
The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will be activated.

1st Push Of Key Fob Unlock Button
This feature lets you program the system to unlock either the driver’s door or all doors on the first push of the unlock button on the key fob. To change the current setting, refer to “Uconnect Settings” in “Multimedia” for further infor-mation.
NOTE: If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — Passive Entry” located in “Doors” in “Getting To Know Your Vehicle” for further information.

To Lock The Doors And Liftgate
Push and release the lock button on the key fob to lock all doors and liftgate.
The turn signal lights will flash and the horn will chirp to acknowledge the signal. Refer to “Uconnect Settings” located in “Multimedia” for further programmable information. If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — Passive Entry” located in “Doors” in “Getting To Know Your Vehicle” for further information.

Vehicles Equipped With Keyless Enter-N-Go — Passive Entry
If one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock again automatically if the key is left inside the passenger compartment, other-wise the doors will stay locked.

Replacing The Battery In The Key With Remote Control
The recommended replacement battery is one CR2032 battery.
NOTE

• Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for fur-ther information.
• Do not touch the battery terminals that are on the back housing or the printed circuit board.

1. Remove the emergency key by sliding the mechanical latch on the back of the key fob sideways with your thumb and pull the emergency key out with your other hand.
2. Separate the key fob halves using the tip of the emergency key, a #2 flat blade screwdriver, or a coin and gently pry the two halves of the key fob apart. Make sure not to damage the seal during removal.
3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a solid surface such as a table or similar and replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol.
4. To assemble the key fob case, snap the two halves together.

Request For Additional Key Fobs
NOTE: Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.

WARNING

• Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
• Always remember to place the ignition in the OFF mode.

Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.
NOTE

• When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer.
• Keys must be ordered to the correct key cut to match the vehicle locks.

General Information
The following regulatory statement applies to all radio frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IGNITION SWITCH
Models With Keyless Enter-N-Go — Passive Entry
This feature allows the driver to operate the ignition switch with the push of a button as long as the key fob is in the passenger compartment. The push-button ignition has three operating positions. The three positions are OFF, ON, and RUN.
NOTE: If the ignition switch does not change with the push of a button, the key fob may have a low or dead battery. In this situation, a backup method can be used to operate the ignition switch. Put the nose side (side opposite of the emergency key) of the key fob against the ENGINE START/STOP button and push to operate the ignition switch.

The push button ignition can be placed in the following positions:
OFF

• The engine is stopped.
• No electrical devices are available.

ON

• The vehicle is not running.
• Some electrical devices are available.

RUN

• Driving position.
• All the electrical devices are available.
  NOTE: The vehicle will not start if the key fob is located inside the cargo area and the liftgate is opened.

WARNING

• When leaving the vehicle, always remove the key fob from the vehicle and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or gear selector.
• Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition in the ON or RUN mode. A child could operate power windows, and other controls, or move the vehicle.
• Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.

CAUTION: An unlocked vehicle is an invitation for thieves. Always remove key fob from the vehicle and lock all doors when leaving the vehicle unattended.
NOTE: For further information, refer to Starting The Engine, in Starting And Operating.

Remote Start Cancel Message — If Equipped
The following messages will display in the instrument cluster if the vehicle fails to remote start or exits remote start prematurely:

• Remote Start Cancelled — Door Open
• Remote Start Cancelled — Hood Open
• Remote Start Cancelled — Fuel Low
• Remote Start Cancelled — Liftgate Open
• Remote Start Cancelled — Too Cold
• Remote Start Cancelled — Time Expired
• Remote Start Disabled — Start Vehicle To Reset

The message will stay active until the ignition is placed in the ON/RUN position.

How To Use Remote Start

• Push the Remote Start button on the key fob twice within five seconds. Pushing the Remote Start button a third time shuts the engine off.
• To drive the vehicle, push the unlock button, and place the ignition in the ON/RUN position.
• With remote start, the engine will only run for 15 minutes (timeout) unless the ignition key is placed in the ON/RUN position.
• The vehicle must be started with the key after two consecutive timeouts.

All of the following conditions must be met before the engine will remotely start:

• Gear Selector in PARK
• Doors closed
• Hood closed
• Liftgate closed
• Hazard switch off
• The brake switch is inactive (brake pedal not pushed)
• Battery at an acceptable charge level
• The PANIC button was not pushed
• The system was not disabled from the previous remote start event
• Vehicle alarm system indicator flashing
• Ignition in the STOP/OFF position
• Fuel level meets minimum requirement

WARNING

• Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled.
• Keep key fobs away from children. Operation of the Remote Start System, windows, door locks, or other controls could cause serious injury or death.

FAQ’s