2019 Fiat 500E Owner’s Manual

The 2019 Fiat 500e was an interesting and environmentally friendly addition to the Fiat lineup. It had all the style and beauty of the famous Fiat 500, but it was powered only by electricity. This small electric car was a great example of what Italian design is all about. It had a retro look, was easy to drive, and didn’t cause any pollution. The 2019 Fiat 500e was powered by an electric motor with 111 horsepower and a lithium-ion battery pack. It was quick and easy to drive in cities, and a single charge could take it about 84 miles. Inside, the car was comfortable and tech-savvy, making it a great choice for people who want to get around the city in a stylish and environmentally friendly way.

STARTING AND OPERATING

STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts.
WARNING

• Never leave children alone in a vehicle, or with access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or transmission gear selector.
• Do not leave the key fob in or near the vehicle (or in a location accessible to children). A child could operate power windows, and other controls, or move the vehicle.

Single-Speed Transmission
The transmission must be in the PARK or NEUTRAL position before you can start the vehicle. Apply the brakes when selecting a transmission gear from Park.
NOTE: You must press the brake pedal before selecting a transmission gear.

Normal Starting
Turn the key to the START position while your vehicle is in PARK. When the ignition key is turned to the START and then released to the RUN position, a chime will sound and the “READY” indicator in the instrument cluster display will illuminate to indicate the 500e’s Electric Drive System has started. When the “READY” indicator is illuminated your 500e is ready to be driven.
NOTE

• If the key is held in the START position for more than 10 seconds “READY” mode will not be achieved. Return the key to the OFF position, and then back to the START position and hold for less than 10 seconds to achieve “READY”.
• If the “READY” indicator fails to illuminate after you have followed the normal starting procedure contact an authorized dealer.

PARKING BRAKE
Before leaving the vehicle, make sure that the parking brake is fully applied. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To release the parking brake, pull the lever up slightly, push the center button, then lower the lever completely.  When the parking brake is applied with the ignition switch in the MAR (ACC/ON/RUN) position, the Brake Warning Light in the instrument cluster will illuminate.
When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle.

WARNING

• Never leave children alone in a vehicle, or with access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or transmission push buttons.
• Do not leave the key fob in or near the vehicle (or in a location accessible to children). A child could operate power windows, and other controls, or move the vehicle.
• Be sure the parking brake is fully disengaged before driving; failure to do so can lead to brake failure and a collision.
• Always fully apply the parking brake when leaving your vehicle, or it may roll and cause damage or injury.

CAUTION: If the Brake Warning Light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.

SINGLE–SPEED TRANSMISSION
Your 500e uses a Single-Speed Transmission to direct the output from the electric motor. The single-speed transmission is operated using push buttons instead of a traditional gear selector. The push buttons are located on the lower instrument panel.

CAUTION: Damage to the transmission may occur if the following precautions are not observed:

• Place the transmission into PARK only after the vehicle has come to a complete stop.
• Place the transmission into or out of REVERSE only after the vehicle has come to a complete stop.
• Before placing the transmission into any range make sure your foot is firmly pressing the brake pedal.

NOTE

• You must press and hold the brake pedal while shifting in or out of PARK.
• If all push-button LEDs are on when the key is ON, see an authorized dealer.

WARNING

• Only place the transmission into gear when your foot is firmly pressing the brake pedal.
• Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the vehicle is in “READY” mode. Before exiting a vehicle, always apply the parking brake, shift the transmission into PARK, and remove the ignition key. Once the key is removed, the transmission is locked in PARK, securing the vehicle against unwanted movement.
• When leaving the vehicle, always remove the ignition key and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or transmission range buttons.
• Do not leave the ignition key in or near the vehicle (or in a location accessible to children). A child could operate power windows, and other controls, or move the vehicle.

Key Ignition Park Interlock
This vehicle is equipped with a Key Ignition Park Interlock which requires the transmission to be in PARK before the ignition can be turned to the OFF position. The key can only be removed from the ignition when the ignition is in the OFF position, and once removed, the transmission is locked in PARK.

Gear Ranges
Push the desired push button to shift into gear.
NOTE:

• The brake pedal must be depressed to select a transmission gear.
• After selecting any gear, wait a moment to allow the selected gear to engage before accelerating.

PARK (P)
The PARK selection supplements the parking brake by locking the transmission. The vehicle can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when exiting the vehicle in PARK. When parking on a level surface, you may place the transmission into PARK first, and then apply the parking brake. When parking on a hill, apply the parking brake before placing the transmission into PARK. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
When exiting the vehicle, always:

• Apply the parking brake.
• Shift the transmission into PARK.
• Turn the vehicle OFF.
• Remove the ignition key.
  NOTE: Refer to the transmission range position displayed in the instrument cluster and verify that it indicates the PARK position.

WARNING

• Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when exiting the vehicle to guard against vehicle movement and possible injury or damage.
• Your vehicle could move and injure you and others if it is not in PARK. Check by trying to move the gear selector out of PARK with the brake pedal released. Make sure the transmission is in PARK before exiting the vehicle.
• It is dangerous to shift out of PARK or NEUTRAL if your foot is not firmly pressing the brake pedal. The vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift the transmission into gear when your foot is firmly pressing the brake pedal.
• Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running or the propulsion system is active. Before exiting a vehicle, always come to a complete stop, then apply the parking brake, shift the transmission into PARK, turn the ignition OFF, and remove the key fob. When the ignition is in the OFF mode, the transmission is locked in PARK, securing the vehicle against unwanted movement.
• When leaving the vehicle, always remove the ignition key and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal, or transmission range buttons.
• Do not leave the ignition key in or near the vehicle (or in a location accessible to children). A child could operate power windows, and other controls, or move the vehicle.

REVERSE (R)
This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop.
NEUTRAL (N)
The vehicle may be started in this gear. Apply the parking brake and place the transmission into PARK if you must exit the vehicle.

FAQ’s