2019 Fiat 500L Instrument Clusters | How to use Dashboard
The 2019 Fiat 500L has a modern and easy-to-use instrument panel that makes driving more enjoyable and gives the driver important information. The instrument panel on the dashboard is well-designed and makes it easy to read by combining digital and analog parts. The main parts are a large speedometer and tachometer that face a digital display in the middle. The digital display shows a lot of data, like how much gas is left, the temperature of the engine, and details about the trip. In addition, the dashboard has warning lights and signs that let the driver know what’s going on with the car. The driver can easily move between the instrument panels by using controls on the steering wheel to get to different functions without taking their eyes off the road. The 2019 Fiat 500L’s instrument clusters are specifically made to be easy for drivers to use, so they can stay aware and focused while having fun behind the wheel.
2023 Fiat 500X Review, Price, Features And Mileage (Brochure)
INSTRUMENT CLUSTER
Instrument Cluster Descriptions
- Speedometer
- Indicates vehicle speed.
- Instrument Cluster Display
- The instrument cluster display shows messages when the appropriate conditions exist. Refer to “Instrument Cluster Display” in “Getting To Know Your Instrument Panel” for further information.
- Tachometer
- Indicates the engine speed in revolutions per minute (RPM x 1000).
- Temperature Gauge
- The temperature gauge shows the engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily.
- The gauge pointer will likely indicate a higher temperature when driving in hot weather or up-mountain grades. It should not be allowed to exceed the upper limits of the normal operating range.
WARNING!
A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Servicing And Maintenance.” Follow the warnings under the Cooling System Pressure Cap paragraph.
CAUTION!
Driving with a hot engine cooling system could damage your vehicle. If the temperature gauge reads “H,” pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H,” turn the engine off immediately and call an authorized dealer for service.
- Fuel Gauge
- The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position.
- The fuel pump symbol points to the side of the vehicle where the fuel door is located.
INSTRUMENT CLUSTER DISPLAY
Your vehicle may be equipped with an instrument cluster display, which offers useful information to the driver. With the ignition in the STOP/OFF position, opening/closing a door will activate the display for viewing, and display the total miles (kilometers) in the odometer. Your instrument cluster display is designed to display important information about your vehicle’s systems and features. Using a driver interactive display located on the instrument panel, your instrument cluster display can show you how systems are working and give you warnings when they aren’t. The steering wheel-mounted controls allow you to scroll through and enter the main menus and submenus. You can access the specific information you want and make selections and adjustments.
Instrument Cluster Display
Instrument Cluster Display Control Buttons
The system allows the driver to select information by pushing the following buttons mounted on the steering wheel:
- Arrow Up/Down Scroll Through Menus And Submenus
- Arrow Right/Left Access Information/Submenu Screens
- OK Button For Selecting And Resetting Information
- Up Arrow Button
Push and release the up arrow button to scroll upward through the main menu and submenus. - Down Arrow Button
Push and release the down arrow button to scroll downward through the main menu and submenus. - Right Arrow Button
Push and release the right arrow button to access the information screens or submenu screens of a main menu item. - Left Arrow Button
Push and release the left arrow button to access the information screens or submenu screens of a main menu item. - OK Button
The OK button may be used for the following: - Select
- Reset (hold)
Change Engine Oil Indicator System
Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the instrument cluster display for approximately ten seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, depending on your driving style.
Unless reset, this message will continue to display each time you turn the ignition to the ON or RUN position. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.
- Turn the ignition switch to the ON position (do not start the engine).
- Fully push the accelerator pedal slowly, three times within ten seconds.
- Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system does not reset. If necessary, repeat this procedure.
Instrument Cluster Display Menu Items
The menu comprises a series of functions arranged in a cycle. The menu includes the following functions:
- Speedometer
- Trip
- Instantaneous Info (If Equipped)
- Trip A
- Trip B
- Vehicle Info
- Tire Pressure
- Service
- Audio
- Phone — If Equipped
- Navigation — If Equipped
- Messages
- Setting
- Display
- Safety & Assistance
- Security
Speedometer
Push and release the up or down arrow button until the Speedometer Menu item is displayed in the instrument cluster display. Push and release the OK button to change the speedometer scale from MPH to km/h. Push and hold the OK to return the speedometer from km/h to MPH.
Trip
Push and release the up or down arrow button until the Trip menu item is displayed in the instrument cluster display.
The Trip menu provides the following submenus:
- Instantaneous Info (If Equipped)
- Trip A
- Trip B
Instantaneous Info (If Equipped)
The Instantaneous Info submenu contains the following information
- Distance To Empty (Range)
- Instantaneous Fuel Consumption
Trip A
Trip A submenu is divided into two pages that contain the following information.
| Page | Menu item | Description |
| Trip A First Page | Distance | Shows the distance traveled during Trip A. |
| Travel Time | Shows the total travel time for Trip A. | |
| Push the OK button on the Steering Wheel to reset the values on this page. | ||
| Trip A Second Page | Average Consumption | Shows the average fuel usage during Trip A. |
| Average Speed | Shows the average speed during Trip A. | |
| Push the OK button on the Steering Wheel to reset the values on this page. | ||
Trip B
Trip B submenu is divided into two pages that contain the following information.
| Page | Menu item | Description |
| Trip B First Page | Distance | Shows the distance traveled during Trip B. |
| Travel Time | Shows the total travel time for Trip B. | |
| Push the OK button on the Steering Wheel to reset the values on this page. | ||
| Trip B Second Page | Average Consumption | Shows the average fuel usage during Trip B. |
| Average Speed | Shows the average speed during Trip B. | |
| Push the OK button on the Steering Wheel to reset the values on this page. | ||
Vehicle Info
Push and release the up or down arrow button until the Vehicle Info menu item is displayed in the instrument cluster display.
The Vehicle Info menu will display the following sub-menus:
- Tire Pressure
- Service
Tire Pressure
The Tire Pressure submenu will indicate an under-inflated tire. When a tire goes below the recommended inflation pressure, the TPMS telltale will illuminate in the cluster, and the Tire Pressure submenu will appear in the Instrument Cluster Display, indicating all underinflated tires. A “Tire Low” message will be present, and the under-inflated tire or tires will be highlighted.
Refer to “Tire Pressure Monitoring System (TPMS)” under “Safety” for further information.
2023 Fiat 500X Review, Price, Features And Mileage (Brochure)
Service
The Service submenu will display information about scheduled maintenance. A pop-up will appear in the display if service is required.
The following information will be displayed in the pop-up:
- Distance to next service visit
- Days until the next service visit
Audio
Push and release the up or down arrow button until the Audio menu title is displayed in the instrument cluster display.
The Audio menu item will display information based on the audio source being listened to.
Phone
Push and release the up or down arrow button until the Phone menu item is displayed in the instrument cluster display. The Phone menu will provide pop-ups during phone calls.
The Phone menu has the following submenus
- Phone: Displays information on phone connectivity. Pushing the OK button on the Steering Wheel will enter the phone submenus.
- Recent Calls: Displays information on the last ten calls made. The information provided includes the phone number/phone book name and type of call (incoming, outgoing, or lost).
- Message Reader: Displays text messages received. Push the OK button on the Steering Wheel to select a message to read. The system will also display if a message has been read or not.
- Favorite Numbers: Displays up to ten favourite numbers. Push the OK button on the Steering Wheel to call a favourite number.
Navigation — If Equipped
Push and release the up or down arrow button until the Navigation menu item is displayed in the instrument cluster display. The Navigation menu provides “turn by turn” instructions when using the vehicle’s navigation function.
The following information is displayed.
- Distance to the next turn
- The name of the street
- An icon representing the next turn
Stored Messages
Push and release the up or down arrow button until the Messages Menu item is highlighted. This feature shows the number of stored warning messages. Pushing the left or right arrow button will allow you to scroll through the stored messages.
Settings
Push and release the up or down arrow button until the Settings menu item is displayed in the instrument cluster display. The Settings menu provides a list of settings that affect the display and functionality of the instrument cluster display.
| Setting Menu Item | Setting Name | Description |
| Display | Backlight | Increase or decrease the brightness of the display. |
| Screen Setup | Configure display with the following options: Zone 1:
|
|
| Phone Repetition | Turn on or off the display of phone-related pop-ups. | |
| Nav. repetition | Turn on or off the display of navigation-related pop-ups. | |
| Automatic Reset Trip B | Reset the Trip B menu item. |
| Setting Menu Item | Setting Name | Description |
| Security | Hill Start Assist | Assists when starting a vehicle from a stop on a hill. Refer to “Electronic Brake Control System” in “Safety” for further information. |
| Park Assist Volume | Increase or decrease Park Assist volume. | |
| Warning Buzzer Volume | Increase or decrease the volume of the warning buzzer. | |
| Speed Warning | Gives notification of when a set speed is exceeded. |
FAQs
The instrument cluster in the 2019 Fiat 500L includes a speedometer, tachometer, fuel gauge, and various warning lights.
Typically, a blue light might indicate that the high-beam headlights are activated.
The fuel gauge on the instrument cluster provides a visual representation of the fuel level; ensure you understand the markings.
Some models may have a feature that displays real-time fuel efficiency.
The instrument cluster may display reminders for routine maintenance tasks like oil changes; refer to the manual for specifics.
Depending on the model, there might be connectivity options.
Instructions for resetting the trip odometer should be available in the owner’s manual.
Some models may have a digital speedometer.
Some models might have different driving modes that can impact the instrument cluster display; refer to the manual for details.
The instrument cluster is designed to provide accurate information, but it’s essential to perform regular maintenance and calibrations for precision.
The instrument cluster may illuminate a check engine light or display a specific warning message if there are engine-related issues. It’s essential to address such warnings promptly.
Aftermarket options for instrument cluster upgrades may include digital displays, additional gauges, or aesthetic modifications, but compatibility should be verified.
Some versions of the 2019 Fiat 500L may feature a real-time fuel efficiency display as part of the instrument cluster.
Yes, the instrument cluster is designed to be backlit, providing visibility for the driver during nighttime driving.
Typically, the low fuel warning light on the instrument cluster will illuminate, and a notification may appear on the digital display.
Useful Link:
View Full PDF: 2019 Fiat 500L Owner’s Manual | Auto User Guide
2023 Fiat 500X Review, Price, Features And Mileage (Brochure)
2019 Fiat 500L Fuses and Fuse Box | Checking and replacing fuses