2020 Fiat 500L Keys and Smart Key Setup Guide

With its unique key and smart key setup, the 2020 Fiat 500L delivers a contemporary and practical solution to vehicle security and ignition. Fiat has advanced to improve the driving experience at a time when technology is effortlessly incorporated into our daily lives. This overview of the 2020 Fiat 500L’s keys and smart key system will focus on the convenience, security, and user-friendliness characteristics that set it apart from competing automobile products. The key and smart key setup on the 2020 Fiat 500L aims to change your expectations of contemporary driving, whether you’re a tech-savvy driver or just looking for a more effortless method to connect with your car.

The 2020 Fiat 500L also provides keyless entry through a remote control if you like a more conventional method. This remote key fob makes it simple to load groceries or get your car ready for the road while you’re still inside your home because it lets you lock and unlock your car remotely. In conclusion, the arrangement of the key and smart key for the 2020 Fiat 500L represents a substantial advancement in contemporary vehicle technology. This system improves your daily driving experience, turning it into more than simply a means of transportation but a seamless aspect of your existence with a focus on convenience, security, and customisation. The 2020 Fiat 500L offers a driving experience that appeals to all tech enthusiasts and those who simply like the convenience of a smart key.

KEYS

KEY WITH REMOTE CONTROL
The Remote Keyless Entry (RKE) key fob contains an integrated key. To use the mechanical key, simply push the mechanical key release button.

Integrated Key

1. Unlock Button
2. Mechanical Key Release Button
3. Lock Button
4. Liftgate Button

NOTE:
The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from an authorized dealer.

To Unlock The Doors And Liftgate
Push and release the unlock button on the key fob once to unlock the driver’s door, or twice within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. To unlock the liftgate only, push and release the liftgate button on the key fob once. The liftgate external handle will be enabled and it will be possible to use it to open the liftgate. After 30 seconds the external handle will be disabled again. The turn signal lights will flash to acknowledge the unlock signal.

To Lock The Doors And Liftgate
Push and release the lock button on the key fob to lock all doors and the liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the signal.

Locking Doors With A Key

1. Insert the key with either side up.
2. Turn the key to the right to lock the door.
3. Turn the key to the left to unlock the door.

Replacing The Battery In The Key With Remote Control

Key Fob Components

1. Mechanical Key
2. Screw
3. Battery Case

To replace the battery, proceed as follows:

1. Push the mechanical release button to open the mechanical key.
2. Turn the screw to unlock using a small screwdriver.
3. Take out the battery case and replace the battery making sure that polarities are correct.
4. Replace the battery case inside the key and lock it by turning the screw to lock.

NOTE:
Used batteries should be properly disposed of as specified by law; see an authorized dealer for assistance needed.

Programming Additional Key Fobs
Refer to “Sentry Key” in this chapter for further information.
If you do not have a programmed key fob, contact an authorized dealer for details.

Request For Additional Remote Controls
The system can recognize up to eight remote controls. Should a new remote control be necessary, go to an authorized dealer. Bring an ID document and the vehicle ownership documents with you.

General Information
The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IGNITION SWITCH

The ignition switch can be turned to three different positions:

1. STOP (OFF/LOCK): engine off, key can be removed. Some electrical devices (e.g. sound system, central door locking system, etc.) can operate.

NOTE:
The transmission must be shifted into PARK before the key is turned to the STOP (OFF/LOCK) position. Then, the key can be removed.

1. AVV (START): engine start-up.
2. MAR (ACC/ON/RUN): driving position. All electrical devices are enabled.

If the key is turned to the STOP (OFF/LOCK) position before shifting into PARK, the key will have to be moved to the driving MAR (ACC/ON/RUN) position and back to STOP (OFF/LOCK). Then, the key can be removed.

Ignition Switch

1. STOP (OFF/LOCK)
2. MAR (ACC/ON/RUN)
3. AVV (START)

WARNING

1. Before exiting a vehicle, always shift the automatic transmission into PARK or the manual transmission into FIRST gear or REVERSE, apply the parking brake, then turn the engine OFF, remove the key fob from the vehicle and lock your vehicle.
2. Never leave children alone in a vehicle, or with access to an unlocked vehicle.
3. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
4. Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
5. Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.

CAUTION
An unlocked vehicle is an invitation. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended.

KEY-IN-IGNITION REMINDER
If the driver’s door is opened when the key is in the ignition and the ignition switch is in the STOP (OFF/LOCK) position, a signal will sound to remove the key.

SENTRY KEY

The Sentry Key Immobilizer system prevents unauthorized vehicle operation by disabling the vehicle. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys which have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation. Therefore, only keys that are programmed to the vehicle can be used to start and operate the vehicle.

NOTE:
A key which has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle.

If the vehicle security light is on after the key is turned to the MAR (ACC/ON/RUN) position, it indicates that there is a problem with the electronics.

CAUTION

1. Always remove the Sentry Key from the vehicle and lock all doors when leaving the vehicle unattended.
2. The Sentry Key Immobilizer system is not compatible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection.

All of the keys provided with your new vehicle have been programmed to the vehicle electronics.

KEY PROGRAMMING

Programming key fobs may be performed at an authorized dealer.

REPLACEMENT KEYS
Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it cannot be programmed to any other vehicle. When having the Sentry Key Immobilizer system serviced, bring all vehicle keys with you to an authorized dealer.

GENERAL INFORMATION
The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQs

Useful Links

View Full pdf: 2020 Fiat 500 Owner’s Manual
2020 Fiat 500L Alarm System Quick Guide