2022 Fiat Panda Seat Belt Guidelines
The seat belt is a vital component at the center of the 2022 Fiat Panda’s protective embrace, making it more than just a car. The seat belt is much more than just a strap; it’s a protector, a barrier against unanticipated forces on the road, meant to keep passengers safe and secure. It is crucial to comprehend the importance of, and maintain appropriate use of, this safety device in order to guarantee a safe and secure journey inside the Panda’s comfortable confines.
SEAT BELTS
All vehicle seats are equipped with seat belts with three anchor points and a retractor. The reel mechanism operates locking the belt in the event of sharp braking or strong deceleration due to an impact. This allows the belt strap to slide freely and to adapt to the body of the occupant. In the event of an accident, the belt will lock reducing the risk of impact inside the passenger compartment and of being projected outside the car.
The driver is responsible for respecting, and ensuring that all the other occupants of the vehicle also respect, the local laws in force in relation to the use of the seat belts.
Always fasten the seat belts before setting off.
USING THE SEAT BELTS
The belt should be worn keeping the torso straight and rested against the backrest.
To fasten the seat belts, hold fastening tongue (A) fig. 91 and insert it into buckle (B), until it clicks into place. On removal, if the belt jams, let it rewind for a short stretch, then pull it out again without jerking.
Press button (C) to release the belt. Guide the belt while it is rewinding to prevent it from twisting. Through the, the belt automatically adapts to the body of the passenger wearing it, allowing freedom of movement.
The retractor may lock when the vehicle is parked on a steep slope: this is perfectly normal. Furthermore, the retractor mechanism locks the belt if it is pulled sharply or in the event of sudden braking, collisions and high-speed bends.
The rear seat is fitted with inertia seat belts with three anchoring points and a retractor. Wear the rear seat belts as shown in fig. 92 (4-seater versions) or fig. 93 (5-seater versions).
fig. 94 and raise or lower the handle (B).
Always adjust the height of the seat belt to fit the person wearing it: this precaution could greatly reduce the risk of injury in the case of collision.
Correct adjustment is obtained when the belt passes approximately half way between the shoulder and the neck. For some versions, front seat belts have just one fixed anchor point located on the door pillar.
WARNING
When putting the back seat to its normal position, make sure the seat belts are positioned so they are ready to use.
ADJUSTING THE SEAT BELT HEIGHT
(for versions/markets, where provided)
Four different adjustments in height are provided. To adjust, press button (A) fig. 94 and raise or lower the handle (B).
Always adjust the height of the seat belt to fit the person wearing it: this precaution could greatly reduce the risk of injury in the case of collision.
Correct adjustment is obtained when the belt passes approximately half way between the shoulder and the neck. For some versions, front seat belts have just one fixed anchor point located on the door pillar.
WARNING
- Never press button (C) fig. 91 when travelling.
- Remember that in the event of an accident, the rear seat passengers not wearing seat belts are exposed to a very serious risk and also represent a serious danger for the front seat occupants.
- The rear central seat belt (for versions/markets, where provided) is provided with a service buckle fig. 95. Do not use the seat belt with the service buckle not fastened. In this case there is a high risk of injury or death in the event of an accident. Before using the belt, always make sure that the service buckle is correctly fastened.
- The rear left and right side belts are provided with an adjustment device for the metal tongue position (metal hook). Adjust the tongue position with respect to the seat belt to improve comfort and reduce noise inside the passenger compartment.
- Make height adjustment of the seat belts when the car is stationary.
- After height adjustment, always check that the cursor to which the ring is fastened is locked in one of the preset positions. To do this, with button (A) fig. 94 released, press downward more to allow the anchoring device to click if it has not been released in one of the possible positions.
SBR (SEAT BELT REMINDER) SYSTEM
The SBR system warns the passengers of the front and rear (for versions/markets, where provided) seats if their seat belt is not fastened. The system warnings unfastened seat belts with visual warnings (warning lights on in the instrument panel and icons on the display) and an acoustic warning (see the following paragraphs).
WARNING
Contact a Fiat Dealership to deactivate this acoustic warning permanently.
The acoustic warning can be reactivated at any time through the display Setup Menu.
Seat belts warning light operation The icons shown on the display fig. 96 indicate:
- driver side front seat belt;
- rear left seat belt (*);
- rear central seat belt (*)
- rear right side seat belt (*);
- passenger side front seat belt (*);
- A: seat belt not fastened;
- B: seat belt fastened.
(*) For versions/markets where provided.
Operation of front seat belt icons
When the ignition device is turned to MAR, icon comes on for a few seconds, regardless of the status of the front seat belts.
With car moving slower than 20 km/h, if the driver side seat belt or the passenger side seat belt (with occupant seated) is unfastened, icon and the corresponding icons on the display stay on constantly.
As soon as a speed of over 20 km/h is reached, with driver side seat belt or the passenger side seat belt (with occupant seated) unfastened, an acoustic warning is activated simultaneously with icon and the corresponding icons on the display flashing for about 105 seconds.
Once activated, this indication cycle stays active for the entire time if the car is moving faster than 8 km/h or if reverse gear is not engaged or until the seat belts are fastened.
If the car speed drops to less than 8 km/h or if reverse gear is engaged
during the warning cycle, the acoustic warning will be interrupted and icon and the corresponding icons on the display switch to constantly on mode. If the entire time has not elapsed and reverse gear is not engaged, the warning cycle is reactivated as soon as the car speed exceeds 20 km/h again.
Operation of rear seat belt icons
The icons are shown on the display With the car travelling as speed lower than 20 km/h, if a rear seat belt is unbuckled, the icon stays on with fixed light for a total of approximately 65 seconds.
The icons are displayed according to the corresponding seat belts in the rear seats, and stay on for about 65 seconds from the last seat belt status change.
If the car is travelling at a speed faster than 20 km/h and reverse is not engaged, if a rear seat belt is unbuckled, an acoustic warning is sounded when the icon blinks for approximately 35 seconds.
Successively, the acoustic warning is deactivated and the icon lights up with fixed light until the end of the entire cycle.
Furthermore the icons light up to indicate the status of the seat belts whenever one of the rear doors is opened.
WARNING
As far as the rear seats are concerned, the SBR system will only indicate whether the seat belts are unfastened or fastened, not the presence of any passengers.
The icons will activate a few seconds after the ignition device has been turned to MAR, regardless of the status of the seat belts (even if the seat belts are all fastened).
All the icons will come on when at least one belt changes from fastened to unfastened status or vice versa.
FAQs
Each occupant of the Fiat Panda is guaranteed safety thanks to the seat belts that can accommodate up to five people.
A seat belt’s main function is to restrain passengers during abrupt braking or collisions, reducing the possibility of injury by keeping them from striking the inside of the car.
Yes, in order to offer protection in the event of an accident or sudden stop, rear seat belts are designed with features similar to those of front seat belts.
Check seat belts for wear, cuts, and fraying on a regular basis. Have them inspected as part of regular auto maintenance as well.
Indeed, over time, exposure to sunlight, moisture, and temperature changes can cause seat belts to deteriorate. It’s imperative to replace worn-out or damaged seat belts.
Prior to use, always make sure seat belts are straight and untangled to guarantee proper operation and maximum safety.
The effectiveness of a seat belt may be impacted by wearing it over large clothing or with attachments like clips or extenders. Put the seat belt on securely and without obstructing any movement.
To ensure proper operation in the event of an emergency, have the seat belt inspected and repaired by a qualified technician if it is unable to retract or buckle correctly.
While some manufacturers do provide seat belt extenders, it is crucial to use only those that have been approved by the manufacturer of the vehicle in order to uphold safety regulations.
Installing seat belts in addition to those specified by the manufacturer is not advised. Changing the car’s safety systems could make everyone less safe.
Make sure all passengers are securely buckled if the seat belt warning light is still on. Should the light continue, there may be a systemic problem that requires examination.
Yes, when properly installed, child safety seats are meant to work with seat belts to protect younger passengers.
Even though they dramatically lower the chance of injury, seat belts might not be able to stop all injuries in serious collisions. They are essential, though, for reducing the severity and impact of injuries.
It is recommended that pregnant women wear seat belts as normal, with the shoulder belt crossing the breasts and the lap belt resting low on the hips. For specific advice, consult a healthcare professional.
Yes, you can clean seat belts with a little soap and water. To preserve their integrity, stay away from harsh chemicals and allow them to air dry fully before using.
Useful Link
View Full PDF : 2022 Fiat Panda Owner’s Manual| Auto User Guide 2022 Fiat Panda Seats Instructions