2022 FORD Bronco User Manual

The 2022 FORD Bronco is an exciting return of a legendary car that is the perfect example of rugged flexibility and off-road mastery. With its classic looks and modern engineering, the Bronco honors its past while bringing cutting-edge technology and capabilities to the market. This all-terrain SUV is made to handle the most difficult terrains. It has a variety of 4×4 systems, advanced suspension, and roof and door choices that can be removed for a unique open-air experience. The 2022 Bronco embodies the spirit of exploration and adventure, asking fans to go on trips that break rules and make new paths. This will give drivers an unforgettable experience that brings them back to the heart of real off-road freedom.

Capacities and Specifications

ENGINE SPECIFICATIONS – 2.3L ECOBOOST™

Engine	Specification
Compression ratio.	10.0:1
Displacement.	138 in³ (2,261 cm³)
Firing order.	1-3-4-2
Ignition system.	Coil on plug
Spark plug gap.	0.028 in (0.7 mm) – 0.031 in (0.8 mm)

ENGINE SPECIFICATIONS – 2.7L ECOBOOST™

Engine	Specification
Compression ratio.	10.0:1
Displacement.	165 in³ (2,700 cm³)
Firing order.	1-4-2-5-3-6
Ignition system.	Coil on plug
Spark plug gap.	0.028 in (0.7 mm) – 0.031 in (0.8 mm)

MOTORCRAFT PARTS – 2.3L ECOBOOST™

Component	Motorcraft Part Number
Air filter element.	FA-2022
Battery.	BAGM-94RH7-800
Cabin air filter.	FP-93
Engine oil filter.1	FL-910-S
Spark plug.	SP-594
Transmission fluid filter.	FT-215
Windshield wiper blade-front.	WW-1703
Windshield wiper blade-rear.	WW-801

1 If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
We recommend Motorcraft parts that are available at your authorized dealer or at www.parts.ford.com. We engineer these parts for your vehicle to meet or exceed our specifications. Use of other parts could impact vehicle performance, emissions and durability. Your warranty could be void for any damage related to use of other parts.

MOTORCRAFT PARTS – 2.7L ECOBOOST™
If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification
SAE/USCAR-36.

Component	Motorcraft Part Number
Air filter element.	FA-2022
Battery.	BAGM-94RH7-800
Cabin air filter.	FP-93
Engine oil filter.1	FL-2062-A
Spark plug.	SP-594
Transmission fluid filter.	FT-215
Windshield wiper blade-front.	WW-1703
Windshield wiper blade-rear.	WW-801

Connected Vehicle

WHAT IS A CONNECTED VEHICLE
A connected vehicle has technology that allows your vehicle to connect to a mobile network and for you to access a range of features. When used in conjunction with the FordPass app, it could allow you to monitor and control your vehicle further, for example checking the tire pressures, the fuel level and the vehicle location. For additional information, refer to the local Ford website.

CONNECTED VEHICLE REQUIREMENTS
Connected service and related feature functionality requires a compatible vehicle network.
Some remote features require additional service activation. Log in to your Ford account for details. Some restrictions, third party terms and message or data rates may apply.

CONNECTED VEHICLE LIMITATIONS
Evolving technology, cellular networks, or regulations could affect functionality and availability, or continued provision of some features. These changes could even stop some features from functioning.

CONNECTING THE VEHICLE TO
A MOBILE NETWORK
WHAT IS THE MODEM
The modem allows access to a range of features built into your vehicle.

ENABLING AND DISABLING THE MODEM

1. Press Settings.
2. Press Connectivity.
3. Press Connected Vehicle Features.
4. Switch vehicle connectivity on or off.

CONNECTING FORDPASS TO THE MODEM

1. Make sure that the modem is enabled using the vehicle settings menu.
2. Open the FordPass app on your device and log in.
3. Add your vehicle or select your vehicle if already added.
4. Select the option to activate your vehicle.
5. Make sure that the name on the screen matches the name shown in your FordPass account.
6. Confirm that FordPass account is connected to the modem.

CONNECTING THE VEHICLE TO A WI-FI NETWORK
Select the settings option on the feature bar.

1. Press Connectivity.
2. Press Manage Wi-Fi Networks.
3. Switch Wi-Fi on.
4. Press View Available Networks.
5. Select an available Wi-Fi network.
   Note: Enter the network password to connect to a secure network.

CONNECTED VEHICLE – TROUBLESHOOTING
CONNECTED VEHICLE –FREQUENTLY ASKED QUESTIONS
Why can I not confirm the connection of my FordPass account to the modem?

• The modem is not enabled. Switch vehicle connectivity on.
• The network signal is weak. Move your vehicle closer to a place where the network signal is not obstructed.

Why can I not connect to a Wi-Fi network?

• You entered the wrong network password. Enter the correct password.
• The network signal is weak. Move your vehicle closer to the Wi-Fi router or to a place where the network signal is not obstructed.
• There are multiple access points in range with the same network name. Choose a unique name for your network. Do not use the default name unless it contains a unique identifier, for example as part of the MAC address.
• Why does the Wi-Fi connection disconnect after successful connection?
• The network signal is weak. Move your vehicle closer to the Wi-Fi router or to a place where the network signal is not obstructed.
  What can I do if I am close to a Wi-Fi router but the network signal strength is weak?
• If your vehicle has a heated windshield, position your vehicle so that the windshield is not facing the Wi-Fi router.
• If your vehicle has metallic tinting on the windows but not on the windshield, position your vehicle so that the windshield is facing the Wi-Fi router or open the windows that are facing the router.
• f your vehicle has metallic tinting on the windows and the windshield, open the windows that are facing the router.
• If your vehicle is in a garage and you have the garage door closed, open the garage door as it could block the signal.
  Why can I not see a network I expect to see in the list of available networks?
• The network is hidden. Make the network visible and try again, or manually add a network in the Wi-Fi settings menu.
  Why do software downloads take too long?
• The network signal is weak. Move your vehicle closer to the Wi-Fi router or to a place where the network signal is not obstructed.
• Wi-Fi network is in high demand or has a slow Internet connection. Use a more reliable Wi-Fi network.
  Why does the software not update when the system seems to connect to a Wi-Fi network and the signal strength is excellent?
• No software update is available at this time.
• Select automatic updates option in the settings menu to enable automatic software update or contact an authorized dealer.
• There could be a connection problem. Test the network using another device.

Navigation

ACCESSING NAVIGATION
WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

Press the button to access Navigation.
Note: For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible. Placing luggage over the antenna may reduce performance.

NAVIGATION MAP UPDATES
To update your Map data over Wi-Fi, your vehicle must be connected to a Wi-Fi access point. For USB updates and other details, contact dealers at
1-866-462-8837 in the United States and Canada, or 01-800-557-5539 in Mexico.
Note: If you find map data errors, you may report them by going to www.here.com/mapcreator.

SETTING A DESTINATION
SETTING A DESTINATION USING THE TEXT ENTRY SCREEN

1. Press the search bar at the top of the screen.
2. Enter your destination using the keyboard.
3. Press Search.
4. Select a destination from the list.
5. Press Start to begin navigation.

ROUTE GUIDANCE
ADJUSTING THE GUIDANCE PROMPT VOLUME
Turn the volume control when a guidance prompt plays to adjust the volume.

REPEATING AN INSTRUCTION
Press the turn indicator to hear the last voice instruction.
ROUTE GUIDANCE SETTINGS
Avoid 4×4 Roads
Before Starting a Navigation Session
Before starting a navigation session you can enable and disable 4×4 roads using the controls on the point of interest detail page. When enabled the system will include 4×4 roads when determining the best route. When disabled the system will avoid 4×4 roads.
During a Navigation Session
If you do not wish to have your route take you on 4×4 roads you can remove the turn onto the 4×4 road using the turn list.

1. Tap the chevron below the turn panel.
2. Swipe to the left on the 4×4 road on the turn list that appears.
3. Press the delete button to remove that road from your route.
   The system will then re-route you to your destination.

FAQ