2022 FORD Bronco Wipers Instruction
Introduction
The 2022 Ford Bronco has already left a lasting impression in the realm of off-road adventure and tough exploration thanks to its iconic design and unparalleled abilities. The 2022 Ford Bronco Wipers are a modest yet crucial innovation that improves convenience and safety as part of Ford’s continued dedication to excellence. The wipers for the 2022 Ford Bronco were painstakingly crafted with care to every last detail, blending in flawlessly with the vehicle’s distinctive appearance while delivering great performance that complements the vehicle’s adventurous character. These wipers are a sign of Ford’s commitment to providing a superb driving experience in any situation, not simply because they are functionally necessary.
The 2022 Ford Bronco Wipers are a prime example of Ford’s dedication to safety, innovation, and a superior driving experience. These wipers are prepared to become an essential part of your off-road adventures thanks to their cutting-edge technology and flawless integration with the legendary look of the Bronco. The 2022 Ford Bronco Wipers are here to make sure that your view is unobstructed and that your ride is remarkable, whether you’re negotiating rugged trails or navigating city streets.
WIPERS
WIPER PRECAUTIONS
Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield.
Fully defrost the windshield before you switch the windshield wipers on.
Switch the windshield wipers off before entering a car wash.
SWITCHING WINDSHIELD WIPERS ON AND OFF
- High-speed wipe.
- Intermittent wipe.
- Off.
Use the rotary control.
SWITCHING THE REAR WINDOW WIPER ON AND OFF
SWITCHING THE REAR WINDOW WIPER ON AND OFF
Rotate the control away from you for a long wipe interval.
Rotate the control toward you for a short wipe interval.
REVERSE WIPE
WHAT IS REVERSE WIPE
Reverse wipe turns on the rear window wiper when you shift into reverse (R) and the windshield wipers are on.
REVERSE WIPE SETTINGS
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Wipers.
- Switch Rear Wiper On (when in Reverse) on or off.
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of the blade to check for roughness.
REPLACING THE FRONT WIPER BLADES
- Pull the wiper blade and arm away from the glass.
Note: Do not hold the wiper blade to lift the wiper arm.
- Lift the wiper blade primary locking clip.
- Press the wiper blade secondary locking clip.
Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
REPLACING THE REAR WIPER BLADES
- Lift the wiper arm.
Note: Do not hold the wiper blade to lift the wiper arm. - Remove the wiper blade.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. - To install, reverse the removal procedure.
Note: Make sure that the wiper blade locks into place.
WASHERS
WASHER PRECAUTIONS
WARNING: If you operate your vehicle in temperatures below 41°F
(5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat.
Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.
USING THE WINDSHIELD WASHER
Press and hold the button at the end of the lever to operate the windshield washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on. See Switching the Courtesy Wipe On and Off.
SWITCHING THE COURTESY WIPE ON AND OFF
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Wipers.
- Switch Courtesy Wipe on or off.
USING THE REAR WINDOW WASHER
Rotate the control to the top or bottom position and hold it to operate the rear window washer.
Note: A courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid when switched on. See Switching the Courtesy Wipe On and Off .
ADDING WASHER FLUID
WASHER FLUID SPECIFICATION
See Washer Fluid Specification .
WIPERS AND WASHERS –TROUBLESHOOTING
WIPERS AND WASHERS –WARNING LAMPS
Illuminates when the windshield washer fluid is low.
WIPERS AND WASHERS –FREQUENTLY ASKED QUESTIONS
Why are there streaks and smears on the windshield?
The wiper blades could be dirty, worn or damaged. Check the wiper blades. See Checking the Wiper Blades
If the wiper blades are dirty, clean them with washer fluid or water applied with a soft sponge or cloth. If the wiper blades are worn or damaged, install new ones. See Replacing the Front Wiper Blades .
FAQs
Two wiper blades, one for the driver’s side and one for the passenger, are included with the 2022 Ford Bronco.
The 2022 Ford Bronco’s suggested wiper blade sizes are normally 21 inches for the passenger’s side and 22 inches for the driver’s side.
Yes, there are options for winter wiper blades that are made to withstand inclement weather, including ice and snow.
Wiper blades should be changed roughly every six to twelve months, or as soon as you observe a decline in their efficacy.
As long as they are the right size and work with your Bronco’s wiper arm attachment, you can utilize aftermarket wiper blades.
Lift the wiper arm away from the windshield, press the wiper blade’s release tab, and then slide the old blade off to replace it. When you hear a click, slide the new blade onto the wiper arm to secure it.
Rain-sensing wipers are an option for the 2022 Ford Bronco. Yes, the 2022 Ford Bronco may have rain-sensing wipers in various trim levels. These wipers automatically change their speed according to the quantity of precipitation they detect.
The wiper control stalk is located on the steering column and is used to turn on the rear wiper on the 2022 Ford Bronco. The rear wiper can be activated by pushing the stalk away from you.
Yes, you may change the wipers’ speed using the wiper control stalk. Different stalk positions correspond to various wiper speeds.
Some automobiles include a maintenance mode that raises the wiper arms above the windshield for simpler upkeep and cleaning. For further information, consult your owner’s handbook.
Regularly cleaning your wiper blades with windshield washer fluid and avoiding using them on a dry windshield will help them last longer.
The wiper control stalk can be used to manually operate the wipers, so the answer is yes. If the automatic rain-sensing feature isn’t functioning properly, this is helpful.
Yes, you can replace just the rubber part of the wiper blade without changing the complete blade thanks to replacement wiper inserts that some manufacturers sell.
Debris or dirt on the wiper blades may be the source of squeaking sounds. The blades can be replaced if necessary or cleaned with a moist cloth.
While certain windshield treatments work well with wipers, it’s still a good idea to follow the manufacturer’s instructions to be sure the treatment won’t hinder wiper effectiveness.
Useful Links
View Full Manual: 2022 FORD Bronco | Auto User Guide
Download Manual: Ford Vehicle Owner Manuals | Ford