2022 FORD Escape Keys and Remote Controls User Guide
The 2022 Ford Escape Keys and Remote Controls welcome you to the world of easy and cutting-edge car access. These cutting-edge technologies offer smooth control and security and are created to improve your driving experience. The keys and remote controls for the 2022 Ford Escape are designed to offer simple functionality and peace of mind whether you’re getting into your car, turning on the engine, or locking it up. With the simple and safe features of the 2022 Ford Escape, say goodbye to the practice of fumbling with keys and hello to the future of vehicular ease.
Keys and Remote Controls
REMOTE CONTROL LIMITATIONS
WARNING
Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
-
- This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Make sure a valid remote control is within 5 ft (1.5 m) from the front door handles and rear of vehicle.
The system may not function if:
- The remote control remains stationary for about a minute.
- The vehicle battery has no charge. The remote control battery has no charge.
- There is interference causing issues with the remote control frequencies.
- The remote control is too close to metal objects or electronic devices, for example keys or a cell phone.
USING THE REMOTE CONTROL
Use your remote control to access various vehicle systems.
Note
The buttons on your remote may vary depending on the vehicle region or options.
Unlock
Press the button to unlock all doors.
Lock
Press the button to lock all doors.
Remote Start
Press the button to remote start.
Liftgate
Press the button to open or close the liftgate.
Panic Alarm
Press the button to sound the panic alarm.
OPENING AND CLOSING THE FLIP KEY
Opening Your Flip Key
Press the round button on the remote control to extend the flip key.
Note
Inspect the key blade for debris. Periodically clean with a brush.
Closing Your Flip Key
Press and hold the round button on the remote control to fold the key blade when not in use.
REMOVING THE KEY BLADE
Push the release button on your passive key and pull the key blade out.
SOUNDING THE PANIC ALARM
Press the button to sound the panic alarm. Press the button E138624 again, or switch the ignition on to turn it off.
Note
The panic alarm only operates when the ignition is off.
LOCATING YOUR VEHICLE
Press the lock button twice within three seconds. The turn signal lamps flash.
Note: We recommend you use this method to locate your vehicle.
CHANGING THE REMOTE CONTROL BATTERY -VEHICLES WITH: PUSH BUTTON START
WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention.
WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death.
The remote control uses one coin-type 3-volt lithium battery CR2450 or equivalent. 
- Push the release button and pull the key blade out.
- Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
- Insert a screwdriver, and carefully remove the battery.
- Install a new battery with the + facing upward.
- Reinstall the battery housing cover onto the transmitter and install the key blade.
Dispose of old batteries in an environmentally friendly way. E107998 Seek advice from your local authority about recycling old batteries.
Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note: Replacing the battery does not erase the programmed key from your vehicle. The remote control should operate normally.
CHANGING THE REMOTE CONTROL BATTERY -VEHICLES WITH: FLIP KEY
WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention.
WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death.
Battery Replacement Procedure
The remote control uses one coin-type 3-volt lithium battery CR2032 or equivalent.
Press the button to release the key blade before beginning the procedure.
- Insert a screwdriver, in the position shown and gently push the clip.
- Press the clip down to release the battery cover.
- Carefully remove the cover.
- Insert a screwdriver as shown to release the battery.
Note: Do not touch the battery contacts or the printed circuit board with the screwdriver. - Remove the battery.
- Install a new battery with the + facing up.
- Replace the battery cover.
Dispose of old batteries in an environmentally friendly way.
Seek advice from your local authority about recycling old batteries.
Note
Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note
Replacing the battery does not erase the programmed key from your vehicle. The remote control should operate normally.
REPLACING A LOST KEY OR REMOTE CONTROL
You can purchase replacement keys or remote controls from an authorized dealer. Authorized dealers can program remote controls for your vehicle.
Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference.
PROGRAMMING THE REMOTE CONTROL
Contact an authorized dealer to program remote controls for your vehicle.
KEYS AND REMOTE CONTROLS – TROUBLESHOOTING
KEYS AND REMOTE CONTROLS – INFORMATION MESSAGES
|
Message |
Action |
|
Key Battery Low Replace Soon |
Replace remote control battery. |
FAQs
The answer is normally two key fobs, so you can have a backup.
No, programming a new key for the 2022 Escape typically calls for specialist equipment and should be done by a qualified locksmith or a Ford dealership.
The majority of key fobs feature a tiny compartment that can be accessed with a small flat-head screwdriver. Reassemble the fob after replacing the battery (often a CR2032).
In most circumstances, you can still start your 2022 Escape by physically unlocking the door with the key blade even if the key fob battery is dead.
Yes, you can typically manually open the tailgate using the button or lever that is located inside the car.
A functional key may be used to program extra key fobs on some models, though the specific steps may differ. For instructions, consult your owner’s manual or get in touch with your dealer.
You’ll probably need to go to a Ford dealership to have new keys made. To accept the new keys, the security system of the car must be reprogrammed.
The remote start range can change, but it typically ranges between 200 and 300 feet. Remember that obstacles like walls and structures can shorten the effective range.
The keyless entry feature is typically a standard feature that is difficult to disengage. In the settings menu of your car, you might find keyless entry settings that can be changed.
This option is available on several 2022 Escape models, and it can frequently be customized in the settings of the car.
In the beginning, try changing the key fob’s battery. If that doesn’t fix the problem, look for troubleshooting procedures in your owner’s manual. Visit your local Ford dealership for assistance if all else fails.
While some locksmiths and hardware stores can make simple keys, the sophisticated electronic keys and fobs used in contemporary cars like the 2022 Escape frequently require specialist equipment that is only accessible at Ford dealerships.
It’s advisable to examine your owner’s manual or get advice from your local Ford dealership before attempting to reprogram a used key fob for the 2022 Escape.
Think about using a key fob cover or case to shield the buttons from unintended pressing.
While aftermarket key fobs are offered, using official Ford key fobs is advised to guarantee compatibility and optimal operation with your car.
Useful Links
View Full PDF:2022 FORD Escape Owner’s Manual |Auto User Gide
2022 FORD Escape Seat Belts User Information