2022 FORD Expedition User Manual

The 2022 Ford Expedition is a powerful and adaptable full-size SUV that sets the standard for space, capability, and new technology. The Expedition has a bold design on the outside that gives it a confident look on the road. It can fit up to eight people and has a lot of room for cargo. It can be equipped with a strong motor, like an EcoBoost V6 engine, that can pull a lot of weight and move quickly. It can also be equipped with advanced four-wheel drive for trips off-road. Inside, the Expedition has a refined interior with the latest infotainment, safety, and driver aid technologies. This makes sure that both the driver and the passengers have a comfortable and connected trip. The 2022 Ford Expedition is a blend of luxury and practicality that sets the bar for high-end SUVs that are good for families.

Instrument Cluster

INSTRUMENT CLUSTER OVERVIEW – VEHICLES WITH: 12.3 INCH SCREEN

• A Tachometer.
• B Engine coolant temperature gauge.
• C Configurable gauges. Oil pressure, transmission oil temperature, turbo boost, vacuum/boost, battery
  voltage, air charge temperature, engine oil temperature or diesel exhaust fluid level gauges.
• D Fuel gauge.
• E Speedometer.
• F Odometer.
• G Compass.
• H Ambient temperature.

TACHOMETER
Indicates the engine speed.
SPEEDOMETER
Indicates the vehicle speed.

FUEL GAUGE
WHAT IS THE FUEL GAUGE
Indicates approximately how much fuel is in the fuel tank.

FUEL GAUGE LIMITATIONS
The fuel gauge may not provide an accurate reading when your vehicle is on an incline.

LOCATING THE FUEL FILLER DOOR
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.

WHAT IS THE LOW FUEL REMINDER
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi
(40 km), 12 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.

WHAT IS DISTANCE TO EMPTY
Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank. Changes in driving pattern can cause the value to not only decrease but also increase or stay constant for periods of time.

ENGINE COOLANT TEMPERATURE GAUGE
Indicates the engine coolant temperature.

ENGINE OIL PRESSURE GAUGE
Indicates the engine oil pressure.
Note: This is a configurable gauge.

TRANSMISSION FLUID TEMPERATURE GAUGE
Indicates the transmission fluid temperature.
Special operating conditions can cause higher than normal operating temperatures. See Special Operating Conditions Scheduled Maintenance (page 531).
Note: This is a configurable gauge.

TURBO BOOST GAUGE (IF EQUIPPED)
Indicates the amount of manifold air pressure in the engine.
Note: This is a configurable gauge.

WHAT ARE THE INSTRUMENT CLUSTER WARNING LAMPS
Warning lamps alert you to a vehicle condition that could become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.

CLIMATE CONTROL HINTS
General Hints

• Prolonged use of recirculated air may cause the windows to fog up.
• You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
• To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
• Do not place objects under the front seats as this may interfere with the airflow to the rear seats.
• Remove any snow, ice or leaves from the air intake area at the base of the windshield.
• To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.

Automatic Climate Control

• Adjusting the settings when your vehicle interior is extremely hot or cold is not necessary. Automatic mode is best recommended to maintain set temperature.
• The system adjusts to heat or cool the interior to the temperature you select as quickly as possible.
• For the system to function efficiently, the instrument panel and side air vents should be fully open.
• If you press AUTO during cold outside temperatures, the system directs air flow to the windshield and side window air vents.In addition, the blower motor may run at a slower speed until the engine warms up.
• If you press AUTO during hot temperatures and the inside of the vehicle is hot, the system uses recirculated air to maximize interior cooling. Blower motor speed may also reduce until the air cools.

Quickly Heating the Interior

1. Press AUTO.
2. Adjust the temperature function to the setting you prefer.

Recommended Settings for Heating

1. Press AUTO.
2. Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

Quickly Cooling the Interior

1. Press MAX A/C.
2. Drive with the windows open for a short period of time.

Recommended Settings for Cooling

1. Press AUTO.
2. Adjust the temperature function to the setting you prefer. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.

Memory Function (If Equipped)

Semiannual Reminder (If Equipped)
When you switch the system off, a message appears every six months as a reminder that the system is off. You can switch the system back on or leave it off.
SWITCHING REAR OCCUPANT ALERT SYSTEM ON AND OFF -VEHICLES WITH: 15 INCH SCREEN

1. Access the vehicle drawer on the touchscreen.
2. Press SETTINGS.
3. Press Vehicle.
4. Switch Rear Occupant Alert on or off. Note: The default setting is on.
   Note: Performing a master reset causes the system to switch on again.

Semiannual Reminder (If Equipped)
When you switch the system off, a message appears every six months as a reminder that the system is off. You can switch the system back on or leave it off.

REAR OCCUPANT ALERT SYSTEM AUDIBLE WARNINGS
Sounds when you switch your vehicle off after the alert conditions are met.
The warning sounds for a short period of time.

WHAT IS THE MEMORY FUNCTION
The memory function recalls the position of these features:

• Driver seat.
• Power mirrors.
• Optional power steering column.
• Optional power-adjustable pedals.

MEMORY FUNCTION PRECAUTIONS
WARNING: Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.
WARNING: Do not use the memory function when your vehicle is moving.

SAVING A PRESET POSITION

1. Adjust the memory features to your preferred position.
2. Press and hold the preferred preset button until you hear a single tone.
   A confirmation message appears in the information display.
   You can save up to three preset memory positions at any time.

RECALLING A PRESET POSITION
Press and release a preset button.
Note: You can recall a preset memory position when the ignition is off, or when you place the transmission in park (P) or neutral (N) if the ignition is on and the vehicle is not moving.
Note: Pressing any of the preset buttons or any memory feature control during a memory recall cancels the operation.
You can also recall a preset memory position by:

• Pressing the unlock button on your remote control if you linked it to a preset position.
• Unlocking the intelligent driver door handle if a linked remote control is present.
  Using a linked remote control to recall your memory position when the ignition is off moves the seat and steering column to the easy entry position.

Wireless Accessory Charger

WHAT IS THE WIRELESS ACCESSORY CHARGER
The wireless accessory charger allows you to charge one compatible Qi wireless charging device on the charging area.

WIRELESS ACCESSORY CHARGER PRECAUTIONS
WARNING: Wireless charging devices can affect the operation of implanted medical devices, including cardiac pacemakers. If you have any implanted medical devices, we recommend that you consult with your physician.

Keep the charging area clean and remove foreign objects prior to charging a device.
Do not place items with a magnetic strip or radio-frequency identification chip, for example passports, parking tickets, transportation passes or credit cards, near the charging area when charging a device. Damage could occur to the magnetic strip or radio-frequency identification chip.
Do not place metal objects, for example remote controls, coins and candy wrappers, on or near the charging area when charging a device. Metal objects may heat up and degrade the charging performance, in addition to causing interruptions in charging.
Charging could be interrupted, degraded, or could stop if any of the following occur:

• The system detects a foreign object.
• The device is misaligned on the charging area.
• The device moves on the active charging area when the vehicle is in motion.
• The vehicle ambient temperature is too high.
• You attempt to charge a non-Qi-compatible device on the wireless charger.
  Note: During charging, the device and the charger could heat up, this is normal. If the battery gets hotter than usual, the device may stop charging.

CHARGING A WIRELESS DEVICE
Place the device on the center of the charging surface with the charging side down. The charging stops after your device reaches a full charge.
You can use the charger when the vehicle is in accessory mode, when the vehicle is running, or when SYNC is on.
Displays on the status bar when wireless charging is in progress.
Note: The charging performance may be affected if your device is in a case. It may be necessary to remove the case to wirelessly charge your device.
Note: Software and firmware updates may affect device compatibility, including the use of unofficial software or firmware. You should verify charging functionality with your specific devices in-vehicle.

FAQ