2022 FORD Mustang Mach-E Owner’s Manual

The 2022 Ford Mustang Mach-E ushers in a new age of electric performance by combining the legendary Mustang with cutting-edge electric propulsion and modern technology. The Mustang Mach-E has a cool crossover design that gives it a dynamic look. It also has thrilling acceleration, quick torque, and an amazing driving range. Its eco-friendly and powerful powertrain choices, such as those with a longer range, rewrite the rules for electric performance and invite drivers to enjoy thrilling and green driving. Inside, the Mustang Mach-E has a large navigation screen and high-tech features to help the driver. The 2022 Ford Mustang Mach-E takes the Mustang’s history into the world of electric cars, breaking rules and inspiring a new generation of speed fans.

Charging Your Vehicle

WHAT IS AC CHARGING
AC charging is the preferred method of charging. AC charging preserves the health of the high-voltage battery for longer high voltage battery life.

WHAT IS DC CHARGING
DC charging allows you to charge the vehicle’s high-voltage battery in significantly less time than the standard charge method. You can charge on the go before the battery has exhausted all of its power, or when traveling using the trip planner as part of your FordPass App.
For the convenience of DC charging and time, there is a different fee structure depending on the charging station and network you choose.
Note: Charge times could vary depending on ambient air temperature, power level, charger type, and location in which you are charging.
Note: The DC charging rate could be reduced to maximize the life of the battery.

CHARGING YOUR VEHICLE PRECAUTIONS 
WARNING: Do not allow charging equipment to be immersed in water or liquids. Failure to follow this warning could result in fire, serious personal injury or death.
WARNING: Do not attempt to open the charging equipment. Failure to follow this instruction could result in personal injury, death or property damage.
WARNING: Do not use the charging equipment if it is faulty or has been damaged. Failure to follow this instruction could result in personal injury, death or property damage.
WARNING: Install charging equipment in compliance with local regulations. Failure to follow this warning could result in fire, serious personal injury or death.

CHARGING EQUIPMENT
WARNING: Do not use an ungrounded wall outlet. The wall outlet must be in good condition and meet up-to-date local codes. Have a qualified electrician check the wall outlet, if you suspect that it is not properly grounded. Failure to follow this instruction could result in electric shock, personal injury, or death.
WARNING: It is recommended that electrical outlets for use with your charging equipment be installed by a licensed, qualified electrician. Installations must comply with the provisions of all local codes. Failure to follow this warning could result in personal injury or death.
WARNING: Do NOT DROP the control box or coupler.
WARNING: Do NOT use if stored outside the temperature range specified.
WARNING: Do not attempt to repair the charging equipment. Contact your local dealer for assistance.

Specification Type	Specification Value
Charger Model	SAE
Voltage	120-240 VAC
Maximum Current	32 amps max continuous
Frequency	60Hz
Power draw when idle	< 2 Watts
Power draw when charging	< 4 Watts
Cable length	Approximately 20 ft (6.1 m)
Weight	8.6 lb (3.9 kg)
Operating temperature	-22°F (-30°C) to 122°F (50°C)
Storage temperature	-22°F (-30°C) to 185°F (85°C)
CCID Environmental	IP67
Ventilation	Not required

• A Connector.
• B Coupler.
• C Control Box.

The mobile charger is in the rear luggage compartment under the load floor and allows you to charge the vehicle’s battery using a standard household outlet.
You must plug the connector into the control box first. Then plug the connector into the household outlet, and then plug the coupler into the vehicle charge port.
The power indicator illuminates blue when the connector is properly inserted into the control box and dedicated wall outlet.
Note: To insert the connector, firmly grasp the connector by the cable or plug and push into the control box until an audible click is heard. Make sure the connector is fully inserted and flush with the control box before inserting it into the outlet. Improper insertion will cause a longer charge session.
Note: Follow the installation instructions provided with the mobile charger.
Note: We recommend using the supplied plugs and connectors.
Note: If you do not use a dedicated circuit, the circuit breaker could trip or open. If a dedicated circuit is not available, contact a licensed professional electrician regarding the installation of a dedicated outlet.

Note: The mobile charger does not charge and gives a fault indication if ground is not present.
Note: Plug the connector for the mobile charger directly into the wall plug receptacle. Do not plug the mobile charger into any form of extension cord.
Note: If the wall bracket is not used for mounting the charging equipment, plug the charging equipment into an outlet closer to ground.

Mobile Charger Fault Indicator Type	Indicator Description
AMBER	The amber fault indicator illumin- ates to communicate that the charger is rebooting after an error.
BLUE	When plugged into the wall outlet, the blue indicator illu- minates to communicate that the charger is ready to use.
RED	The red indicator illuminates when the charger has

Mobile Charger Fault Indicator Type	Indicator Descrip- tion
	detected an error. If the red indicator is illuminated, the charger will not deliver power to the vehicle. The error must be corrected before a charging cycle can begin or continue.

Note: When first plugged into a wall outlet the amber, blue and red indicators will blink once. Then the blue indicator turns on, followed by a blink of the red indicator. After, the blue indicator turns off then back on. This cycle will happen twice if a different connector is used from a previous charge.

Reverse Braking Assist

WHAT IS REVERSE BRAKING ASSIST
The system uses sensors on the rear of your vehicle to detect a possible collision and applies the brakes to either reduce the damage from impact or to assist in avoiding the collision.

HOW DOES REVERSE BRAKING ASSIST WORK
Reverse Braking Assist functions when in reverse (R) and travelling at a speed of 1–7 mph (1.5–12 km/h).
If the system detects an obstacle behind your vehicle, it provides a warning through the rear parking aid or cross-traffic alert system.

REVERSE BRAKING ASSIST PRECAUTIONS 
WARNING: You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
WARNING: To help avoid personal injury, always use caution when in reverse (R) and when using the sensing system.
WARNING: The system may not operate properly during severe weather conditions, for example, snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.

The system only applies the brakes for a short period when an event occurs. Act as soon as you notice the brakes apply to remain in control of the vehicle. If you do not intervene the vehicle may start to move again.
Note: Certain add-on devices around the bumper or fascia may create false alerts. For example, large trailer hitches, bicycle or surfboard racks, license plate brackets, bumper covers or any other device that may block the normal detection zone of the system. Remove the add-on device to prevent false alerts.
Note: The system does not react to small or moving objects, particularly those close to the ground.
Note: The system does not operate during hard acceleration or steering.

SWITCHING REVERSE BRAKING ASSIST ON AND OFF

1. Access the vehicle drawer on the touchscreen.
2. Press SETTINGS.
3. Press Driver Assistance.
4. Switch Reverse Brake Assist on or off.
   Note: The system is unavailable when the rear parking aid, cross-traffic alert or traction control is off.
   Note: If your vehicle is not equipped with cross-traffic alert the reverse braking assist relies on input from the rear parking aid and rear camera sensors.
   Note: The default setting is on in some regions.

OVERRIDING REVERSE BRAKING ASSIST
There could be instances when unexpected or unwanted braking occurs. Firmly pressing the accelerator pedal or switching the feature off overrides the system.

REVERSE BRAKING ASSIST –FREQUENTLY ASKED QUESTIONS
Why is reverse braking assist unavailable?

• Make sure the reverse braking assist is on. See Switching Reverse Braking Assist On and Off (page 193).
• Make sure that all doors and the liftgate or tailgate are closed. Drive the vehicle on a straight road for a short period. If the message remains, contact an authorized dealer.
• Make sure the cross-traffic alert system is on if equipped. See Switching Cross Traffic Alert On and Off (page 255).
• Make sure the rear parking aid system is on. See Rear Parking Aid (page 207).
• Make sure the traction control is on. See Switching Traction Control On and Off (page 198).
  Note: The traction control automatically turns off if four-wheel drive is low and certain drive modes such as mud/ruts and snow/sand is activated.
• The vehicle may have sustained a rear-end impact. Contact an authorized dealer to have the sensors checked for proper coverage and operation.
• An anti-lock brake, traction control or stability control event may have occurred. Reverse braking assist resumes operation when the event is complete.
• Make sure the rear view camera and 360-degree camera are not dirty or obstructed. If dirty, clean the camera. If the message still appears after cleaning the camera, wait a short time for the message to clear. If the message does not clear, contact an authorized dealer.
• Make sure the cross-traffic alert and rear parking aid sensors are not blocked or faulty. See Locating the Cross Traffic Alert Sensors (page 256). See Locating the Rear Parking Aid Sensors (page 207).
• You recently had your vehicle serviced, or the battery disconnected. Drive your vehicle a short distance to resume system operation.
• Reverse braking assist does not function when you connect a trailer. Operation resumes when you disconnect the trailer.
  Note: If the answers to why the system is unavailable do not assist in returning reverse braking assist to available, have the system checked as soon as possible.

FAQ