2022 FORD Police Interceptor – Utility User Manual

The 2022 Ford Police Interceptor Utility is a new kind of police car that meets the needs of current policing by combining rugged performance, advanced technology, and improved safety features. The exterior of the Interceptor Utility is bold and authoritative, so it gets a lot of attention and respect on the road. It also has a wide range of powerful engine choices, including fuel-efficient EcoBoost and hybrid models, which give it great pursuit capabilities. Inside, the vehicle has a purpose-built and ergonomic interior that is designed for officer comfort and utility. It is also equipped with cutting-edge law enforcement technology, such as advanced connectivity, surveillance systems, and improved driving assistance features. The 2022 Ford Police Interceptor Utility is a reliable and flexible partner for law enforcement agencies, making sure that police can serve and protect their communities in the best way possible.

INSTRUMENT PANEL

• A Cruise control. See Cruise Control (page 66). Auxiliary control. See Audio Control (page 65).
  B Direction indicator. See Direction Indicators (page 71). Wiper lever. See Windshield Wipers (page 67).
• C Information display. See General Information (page 84).
• D Information display control. See Information Display Control (page 66).
• E Gearshift lever. See Automatic Transmission (page 141).
  F Deep sand/snow mode button. See What Is Drive Mode Control (page 177).
• G Information and Entertainment display.
• H Pre-collision assist disable. See Pre-Collision Assist (page 173). Police perimeter alert. See Security (page 63).
  I Audio unit. See Audio Unit (page 300).
  J Climate control. See Automatic Climate Control (page 100).
• K Rear climate control. See Rear Passenger Climate Controls (page 103).
• L Electric parking brake. See Electric Parking Brake (page 151).
• M Ignition switch. See Ignition Switch (page 117).
• N Horn.
• O Steering wheel adjustment. See Adjusting the Steering Wheel (page 65).
• P Lighting control. See Lighting Control (page 69). Police engine idle switch. See Police Engine Idle Feature (page 121). Fuel door release (Hybrid only). See Refueling (page 132).

Starting and Stopping the Engine

GENERAL INFORMATION
WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.
WARNING: Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.
WARNING: Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine.
WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately? Do not drive if you smell exhaust fumes.

If you disconnect the battery, your vehicle may exhibit some unusual driving characteristics for approximately 5 mi
(8 km) after you reconnect it. This is because the engine management system must realign itself with the engine. You can disregard any unusual driving characteristics during this period.
The powertrain control system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field or radio noise.
When you start the engine, avoid pressing the accelerator pedal before and during operation. Only use the accelerator pedal when you have difficulty starting the engine.

IGNITION SWITCH
0 (off) – The ignition is off.
Note: When you switch the ignition off and leave your vehicle, do not leave your key in the ignition. This could cause your vehicle battery to lose charge.
I (accessory) – Allows the electrical accessories, such as the radio, to operate while the engine is not running.
Note: Do not leave the ignition key in this position for too long. This could cause your vehicle battery to lose charge.
II (on) – All electrical circuits are operational and the warning lamps and indicators illuminate.
III (start) – Cranks the engine.

STARTING A GASOLINE ENGINE
When you start the engine, the idle speed increases. This helps to warm up the engine. If the engine idle speed does not slow down, have your vehicle serviced immediately.

Note: You can crank the engine for a total of 60 seconds without the engine starting before the starting system temporarily disables. The 60 seconds does not have to be all at once. For example, if you crank the engine three times for 20 seconds each time, without the engine starting, you reached the 60-second time limit. A message appears in the information display alerting you that you exceeded the cranking time. You cannot attempt to start the engine for at least 15 minutes. After 15 minutes, you are limited to a 15-second engine cranking time. You need to wait 60 minutes before you can crank the engine for 60 seconds again.
Before starting your vehicle, check the following:

• Make sure all occupants fasten their seatbelt.
• Make sure the headlamps and electrical accessories are off.
• Make sure the parking brake is on.
• Make sure the transmission is in park (P).
• Switch the ignition key to position II. Note: Do not touch the accelerator pedal.
  1. Fully press the brake pedal.
  2.  Turn the key to position III to start the engine.
     Note: The engine may continue cranking for up to 15 seconds or until it starts.
     Note: If you cannot start the engine on the first try, wait for a short period and try again.

Failure to Start
If you cannot start the engine after three attempts, wait 10 seconds and follow this procedure:

1. Fully press the brake pedal.
2.  Shift into park (P).
3. Fully press the accelerator pedal and hold it there.
4. Attempt to start your vehicle and wait until the engine stops cranking.
5. Release the accelerator pedal.
6. Start the engine.

Stopping the Engine When Your Vehicle is Stationary

1. Shift into park (P).
2. Turn the key to position 0.
3. Apply the parking brake.

Stopping the Engine When Your Vehicle is Moving
WARNING: Switching off the engine when your vehicle is still moving results in a significant decrease in braking assistance. Higher effort is required to apply the brakes and to stop your vehicle. A significant decrease in steering assistance could also occur. The steering does not lock, but higher effort could be required to steer your vehicle. When you switch the ignition off, some electrical circuits, for example airbags, also turn off. If you unintentionally switch the ignition off, shift into neutral (N) and restart the engine.

1. Shift into neutral and use the brakes to bring your vehicle to a safe stop.
2. When your vehicle stops, shift into park (P) and turn the key to position 0.
3. Apply the parking brake.

Guarding Against Exhaust Fumes
WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately? Do not drive if you smell exhaust fumes.

Important Ventilating Information
If you stop your vehicle and then leave the engine idling for long periods, we recommend that you do one of the following:

• Open the windows at least 1 in (2.5 cm).
• Set your climate control to outside air.

STARTING A HYBRID ELECTRIC VEHICLE SYSTEM
Before starting your vehicle, check the following:

• Make sure all occupants fasten their seatbelt.
• Make sure the headlamps and electrical accessories are off.
• Make sure the parking brake is on.
• Make sure the transmission is in park (P).
  Note: Do not touch the accelerator pedal.
  1. Turn the key to position III to start your vehicle.
     Note: The green READY indicator illuminates letting you know that your vehicle is ready for driving. Since your vehicle comes with a silent key start, the engine does not start when your vehicle starts. See Hybrid Vehicle Operation (page 122).

When the engine starts for the first time on your drive, the idle speed increases, this helps to warm up the engine. If the engine idle speed does not slow down, have your vehicle checked as soon as possible.
If you are unable to start your vehicle, do the following:

1. Switch off all accessories.
2. Switch your vehicle off, remove the key and wait 10 minutes for all systems to shut down.
3. Insert the key in the ignition.
4. Turn the key to position III to start your vehicle.
   If your vehicle still does not start, have your vehicle serviced immediately.

Switching Off Your Vehicle When It Is Stationary

1. Put the transmission in park (P).
2. Turn the key to position 0.
3. Apply the parking brake.

Switching Off Your Vehicle When It Is Moving
WARNING: Do not switch off your vehicle when it is moving. This results in a significant decrease in braking and steering assistance. If the vehicle is switched off, some electrical circuits, for example airbags, could also turn off. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.

1. Turn the key to position 0.
2. Put the transmission into neutral (N) and use the brakes to bring your vehicle to a safe stop.
3. When your vehicle stops, put the transmission in park (P).
4. Apply the parking brake.

Guarding Against Exhaust Fumes 
WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.

Important Ventilating Information
If you stop your vehicle and then leave the engine idling for long periods of time, we recommend that you do one of the following:

• Open the windows at least 1 in (3 cm).
• Set your climate control to outside air.

FAQ