2022 FORD Transit Connect Owner’s Manual

The 2022 Ford Transit Connect is a small commercial van that is both flexible and useful. It is the right combination of efficiency, adaptability, and modern functionality. The Transit Connect has a sleek, aerodynamic design that makes it easy to drive in cities. It also has a lot of cargo room for business needs. Designed to maximize productivity, it comes with a variety of powerful engines and advanced connectivity choices that make it easy to work and talk on the go. The 2022 Ford Transit Connect is a reliable and flexible commercial vehicle that can be used for deliveries, service calls, or moving passengers. It is a good choice for businesses that need a small but capable commercial vehicle to meet a wide range of working needs.

Keyless Entry

WHAT IS KEYLESS ENTRY
The system allows you to lock and unlock your vehicle without taking the passive key out of your pocket or purse.

KEYLESS ENTRY LIMITATIONS
A valid passive key must be within one of the three external detection ranges. These are approximately 5 ft (1.5 m) from the front door handles and the
The system could not function if:

• The passive key remains stationary for about a minute.
• The vehicle battery has no charge.
• The passive key battery has no charge.
• The passive key frequencies are jammed.
• The passive key is too close to metal objects or electronic devices, for example keys or a cell phone

KEYLESS ENTRY SETTINGS
Switching Keyless Entry On and Off

1. Using the instrument cluster controls on the steering wheel, select Settings.
2. Select Vehicle Settings.
3. Select Locks.
4. Switch Intelligent Access on or off.

Reprogramming the Unlocking Function
You can program the unlocking function so that only the driver door unlocks when you touch the unlock sensor on the exterior door handle.
If you program the unlocking function so that only the driver door unlocks, the following occurs:

• If you open the driver door first, all other doors remain locked. You can unlock all of the other doors from inside your vehicle using the power door lock control on the driver door. You can unlock individual doors by pulling the interior door handles on those doors.
• If you open any other door first, all other doors and the liftgate unlock.

You can change between the unlocking modes in the information display.

1. Using the instrument cluster controls on the steering wheel, select Settings.
2. Select Vehicle Settings.
3. Select Locks.
4. Select Remote Unlock.
5. Select All Doors or Driver’s Door.

KEYLESS ENTRY SETTINGS
Switching Keyless Entry On and Off

1. Using the instrument cluster controls on the steering wheel, select Settings.
2. Select Vehicle Settings.
3. Select Locks.
4. Switch Intelligent Access on or off.

Reprogramming the Unlocking Function
You can program the unlocking function so that only the driver door unlocks when you touch the unlock sensor on the exterior door handle.
If you program the unlocking function so that only the driver door unlocks, the following occurs:

• If you open the driver door first, all other doors remain locked. You can unlock all of the other doors from inside your vehicle using the power door lock control on the driver door. You can unlock individual doors by pulling the interior door handles on those doors.
• If you open any other door first, all other doors and the liftgate unlock.

You can change between the unlocking modes in the information display.

1. Using the instrument cluster controls on the steering wheel, select Settings.
2. Select Vehicle Settings.
3. Select Locks.
4. Select Remote Unlock.
5. Select All Doors or Driver’s Door.

USING KEYLESS ENTRY
Unlocking the Doors
Unlock sensors are on the back of the exterior front door handles.
Touch the unlock sensor to unlock your vehicle and disarm the alarm. The direction indicators flash. Do not touch the lock sensor on the outer surface of the door handle.
Keep the door handle clean to make sure the system correctly operates.
After unlocking the doors with the unlock sensor, there is a brief delay before you can lock your vehicle. When the delay period is over, you can lock the doors again, provided the passive key is within the respective detection range.

Locking the Doors
Lock sensors are on the top of the exterior front door handles.
Touch a lock sensor once to lock your vehicle and arm the alarm. The direction indicators flash.
Keep the door handle clean to make sure the system correctly operates.
Note: Your vehicle does not automatically lock. If you do not touch a lock sensor your vehicle remains unlocked.

After locking the doors with the lock sensor, there is a brief delay before you can unlock your vehicle. This delay lets you pull the handle to make sure your vehicle is locked. When the delay period is over, you can unlock the doors again, provided the passive key is within the respective detection range.

KEYLESS ENTRY – TROUBLESHOOTING
KEYLESS ENTRY – FREQUENTLY ASKED QUESTIONS

Why does the keyless entry system not function?
If the system does not function it may be limited. See Keyless Entry Limitations (page 101). If the system still does not function use the remote control or the key blade to lock and unlock your vehicle.
Why can I not lock my vehicle?
If you electronically lock your vehicle with a rear door open, the system searches for a passive key inside your vehicle after you close the last door. If the system detects a key, all doors unlock indicating that a key is inside. Your vehicle locks if another passive key is within the detection range after you close the last door.
Why does the passive key not work?
The system deactivates passive keys left inside your vehicle when you lock it. You cannot switch the ignition on using a deactivated passive key. Press the unlock button on the remote control to reactivate a passive key.

Power Running Boards

POWER RUNNING BOARD PRECAUTIONS
WARNING: In extreme climates, excessive ice buildup may occur, causing the running boards not to deploy. Make sure that the running boards have deployed, and have finished moving before attempting to step on them. The running boards will resume normal function once the blockage is cleared.
WARNING: Switch off the running boards before jacking or placing any object under your vehicle. Never place your hand between the extended running board and your vehicle. A moving running board may cause injury.

Do not use the running boards, front and rear hinge assemblies, running board motors, or the running board underbody mounts to lift your vehicle when jacking. Use proper jacking points.
The running boards could move slower in cold temperatures.

POWER RUNNING BOARD SETTINGS

1. Using the instrument cluster display controls on the steering wheel, select Settings.
2. Select Vehicle Settings.
3. Select Power Steps.
4. Select a setting.

Power Running Board Settings

• Off
  The power running boards remain stowed, regardless of door position.
• Auto
  The power running boards deploy when you open the door and stow when you close the door.
• Out
  The power running boards remain deployed, regardless of door position.

DEPLOYING AND STOWING THE POWER RUNNING BOARDS
The power running boards deploy when you open the door and stow when you close the door.
Note: The power running boards reverse direction and move to the end of travel if they encounter an object when moving.

POWER RUNNING BOARDS –TROUBLESHOOTING
POWER RUNNING BOARDS –FREQUENTLY ASKED QUESTIONS
Why is there unwanted noise coming from my power running boards?
The power running board mechanism could trap debris such as mud, dirt, snow, ice and salt. If this happens, set the running boards to the deployed position. Then, wash the system, in particular the front and rear hinge arms, with a high-pressure car wash wand.

Maintenance

MAINTENANCE PRECAUTIONS
Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.
If your vehicle requires professional service, an authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered.
Use only recommended fluids and service parts conforming to specifications.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:

• Component damage not covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Reduced brake performance.

CHECKING THE ENGINE OIL LEVEL

1. Make sure that your vehicle is on level ground.
2. Check the oil level before starting the engine, or switch the engine off after warming up and wait 10 minutes for the oil to drain into the oil pan.
3. Remove the dipstick and wipe it with a clean, lint-free cloth.
4. Reinstall the dipstick and make sure it is fully seated.
5. Remove the dipstick again to check the oil level.
   Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil.
6. If the oil level is at the minimum mark, immediately add oil.
7. Reinstall the dipstick. Make sure it is fully seated.
   Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km).

ADDING ENGINE OIL
WARNING: Do not remove the filler cap when the engine is running.
WARNING: Do not add engine oil when the engine is hot. Failure to follow this instruction could result in personal injury.

Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that the vehicle warranty may not cover.

1. Clean the area surrounding the engine oil filler cap before you remove it.
2. Remove the engine oil filler cap.
3. Add engine oil that meets our specifications. See Capacities and Specifications (page 449).
4. Reinstall the engine oil filler cap. Turn it clockwise until you feel a strong resistance.
   Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage.
   Note: Immediately soak up any oil spillage with an absorbent cloth.

FAQ