2023 FORD Explorer Instrument Cluster Guide
Introduction
Presenting the 2023 Ford Explorer Instrument Cluster, a state-of-the-art demonstration of innovation and practicality. The instrument cluster acts as your command center, seamlessly fusing technology and functionality. It gives you important information at a glance and improves your driving experience.
The 2023 Ford Explorer Instrument Cluster, which has a high-resolution digital display and a programmable interface, enables you to customize the data you view, from entertainment and navigation to vehicle performance data. Thanks to voice-activated capabilities and straightforward controls, you can stay connected and informed without having to take your eyes off the road.
Instrument Cluster
GAUGES – VEHICLES WITH: A 6.5-INCH INSTRUMENT CLUSTER DISPLAY SCREEN
- Tachometer.
- Information bar.
- Speedometer.
- Fuel gauge.
- Information display.
- Engine coolant temperature gauge.
Information Bar
Displays information related to the navigation, outside air temperature, odometer and distance to empty.
Information Display
Displays information related to the navigation, outside air temperature, odometer and distance to empty.
Information Display
Information that appears depends on your vehicle settings. See General Information (page 115).
Fuel Gauge
The fuel gauge indicates about how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note]
The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) for MyKey, and at 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Note
The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Distance to Empty
Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank. Changes in driving patterns can cause the value to not only decrease but also increase or stay constant for periods.
Engine Coolant Temperature Gauge
WARNING
- Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
- Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
GAUGES – VEHICLES WITH 12.3-INCH INSTRUMENT CLUSTER DISPLAY SCREEN
Note
Clusters are shown in single gauge view.
Note
Displays may appear slightly different depending on the region.
Instrument Cluster
- Gauge display.
- Speedometer.
- Information bar.
- Information display. Fuel gauge.
Gauge Display
Displays different gauge selections depending on supported options. Options include a Tachometer or Engine Coolant Temperature.
Information Bar
Displays information related to the current audio source, navigation, outside air temperature and distance to empty.
Information Display
Information that appears depends on current gauge view and on-demand settings. See General Information (page 115).
Fuel Gauge
- The fuel gauge indicates about how much fuel is in the fuel tank.
- The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note
The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) for MyKey, and at 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Note
The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Distance to Empty
Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank. Changes in driving patterns can cause the value to not only decrease but also increase or stay constant for periods.
Engine Coolant Temperature Gauge
WARNING
Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
GAUGES – VEHICLES WITH: 4.2 INCH INSTRUMENT CLUSTER DISPLAY SCREEN
- Tachometer.
- Information display.
- Speedometer.
- Fuel gauge.
- Engine coolant temperature gauge.
Information Display
Information that appears depends on your vehicle settings. See General Information (page 115).
Fuel Gauge
The fuel gauge indicates how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note
The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi
(40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
Note
The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Engine Coolant Temperature Gauge
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
WARNING
Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
WARNING LAMPS AND INDICATORS
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note
Some warning indicators appear in the information display and function the same as a warning lamp, but do not display when you start your vehicle.
Adaptive Cruise Control
The cruise control system indicator light changes color to indicate what mode the system is in.
Normally, it illuminates until the engine is cranked and automatically turns off if no system errors are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance testing.
If it illuminates when the engine is running this indicates a system error. The On Board Diagnostics system has detected an error in the vehicle emission control system.
If it flashes, engine misfire may be occurring. Continuing to drive your vehicle may cause reduced power or the engine to stop. Failure to respond to the warning lamp may cause component damage not covered by the vehicle Warranty. Have your vehicle checked as soon as possible.
Stability Control
It flashes when the system is active. If it remains illuminated or does not illuminate when you switch the ignition on, this indicates a system error. During a system error the system switches off. Immediately have them system checked.
Stability Control Off
Illuminates when you switch the system off. It goes out when you switch the system back on or when you switch the ignition off.
FAQs
The 2023 Ford Explorer’s instrument cluster is a digital display panel mounted behind the steering wheel that gives the driver access to crucial vehicle data, including speed, fuel level, odometer reading, and numerous warning indicators.
Use the steering wheel controls or the main touchscreen to access the settings menu and modify the instrument cluster’s display theme. From there, you can choose from a variety of themes to alter the cluster’s appearance.
The data shown on the instrument cluster can be changed, yes. You can select the information you want to display, such as navigational instructions, audio information, or trip information, using the car settings menu.
Navigate to the trip information screen and choose the reset option to restart the trip odometer on the instrument cluster. By doing this, the previous trip data will be erased and a new trip will be tracked.
hen warning lights appear on the instrument cluster, there may be a problem with your car. To determine the precise warning, consult the owner’s manual. Then, take the advised actions, which may include monitoring the fluid levels or contacting a specialist, as directed.
Yes, you can use Bluetooth to link your smartphone for hands-free calling with the instrument cluster. To pair your device and use functions like phone calls and text messaging, use the SYNC system.
The brightness of the instrument cluster can be changed via the dashboard’s brightness controls or the settings menu on the main touchscreen.
Yes, the instrument cluster can show navigational advice. Directions are shown on the cluster for convenient viewing when using the built-in navigation system or connecting your smartphone.
The “Check Engine” light suggests that there may be a problem with the engine or emissions system of the car. To identify and fix the issue, it is advised that you have a certified mechanic examine your car.
Using the controls on the steering wheel, you can choose between several information screens on the instrument cluster. Typically, displays displaying diverse data can be cycled through using buttons.
The units shown on the instrument cluster can be changed, yes. To swap between miles and kilometres as well as other units, open the settings menu and look for the unit conversion choices.
Yes, you may reset the instrument cluster’s maintenance reminder. For further information on how to reset the maintenance indicator when scheduled maintenance is finished, consult the owner’s manual.
Go to the fuel economy screen on the instrument cluster to see the fuel economy in real-time. You can improve your driving efficiency by using this page to see how much fuel you are currently using.
The instrument cluster’s software can be updated, yes. To see whether there are any software updates to enhance operation and fix any potential problems, check the Ford website or go to a dealership.
Try restarting the car if the instrument cluster stops working. If the problem continues, it is advised to get in touch with your neighbourhood Ford dealership or a licensed expert for more help in identifying and fixing the issue.
2023 Ford Explorer Specs, Price, Features, Mileage (Brochure)
Useful Links
View Full PDF:2023 FORD Explorer |Auto User Guide
Download Manual: Ford Vehicle Owner Manuals | Ford
Related Article
2023 Ford Bronco Specs, Price, Features, Mileage (Brochure)
2023 Ford Puma Specs, Price, Features, and Mileage (Brochure)
2023 FORD ECOSPORT Specs, Price, Features and Mileage (Brochure)