2023 FORD Maverick Interior and Exterior Features
Introduction
Welcome to the 2023 Ford Maverick, the pinnacle of driving performance. Prepare to set out on an adventure that redefines what it means to operate a tiny pickup truck by fusing innovation, style, and functionality. The Maverick is a monument to Ford’s dedication to producing vehicles that surpass expectations, from its striking outward design to its carefully thought-out interior.
A paradise of comfort and sophistication awaits you within the cabin of the 2023 Ford Maverick. The interior is carefully planned to accommodate both the driver and the passengers, and it includes high-end materials and a layout that prioritizes connectivity and comfort. With its roomy seats, comfortable controls, and cutting-edge entertainment system, every time spent operating the vehicle is delightful.
Exterior Lighting
EXTERIOR LIGHTING CONTROL
- A. Lamps off.
- B. Parking lamps on.
- C. Auto lamps on.
- D. Headlamps on.
Rotate the control to make a selection.
Note: The lighting control defaults to auto lamps every time you switch your vehicle on.
HEADLAMPS
USING THE HIGH BEAM HEADLAMPS
Push the lever away from you to switch the high beams on.
Push the lever forward again or pull the lever toward you to switch the high beams off.
Slightly pull the lever toward you and release it to flash the headlamps.
Note: Continuous activation only with headlamps on.
SWITCHING HEADLAMP EXIT DELAY ON AND OFF
To switch the headlamp exit delay on, pull the turn signal lever toward you after switching your vehicle off.
To switch the headlamp exit delay off, pull the turn signal lever toward you again or switch your vehicle on.
Note: The headlamps turn off after three minutes with any door open or 30 seconds after the last door closes.
HEADLAMP INDICATORS
Lamps On
Illuminates when you switch the low beam headlamps or the parking lamps on.
Headlamp High Beam
Illuminates when you switch the high beam headlamps on.
HEADLAMPS – TROUBLESHOOTING
HEADLAMPS – FREQUENTLY ASKED QUESTIONS
Why is there condensation in the headlamps?
- Headlamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
How much condensation is acceptable?
- The presence of a fine mist, for example, no streaks, drip marks or large droplets. A fine mist covers less than 50% of the lens.
How long may it take for the acceptable condensation to be cleared?
- Clearing time may take as long as 48 hours under dry weather conditions.
How much condensation is unacceptable?
- A water puddle inside the lamp. Streaks, drip marks or large droplets are present on the interior of the lens.
What should I do if unacceptable condensation is present?
- Have your vehicle checked as soon as possible.
Why do my headlamps turn off when I have them switched on when I switch my vehicle off?
- The battery saver turns the headlamps off after a short period after you switch your vehicle off.
AUTOLAMPS
WHAT ARE AUTO LAMPS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example daytime fog.
Auto lamps turn the headlamps on in low-light situations or when the windshield wipers operate.
AUTOLAMP SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Select Auto lamp Delay.
- Select a setting and press the OK button.
EXTERIOR LAMPS
USING THE TURN SIGNAL LAMPS
Push the lever up or down to switch the turn signal lamps on.
Set the lever to the middle position to switch the turn signal lamps off.
Note: Tap the lever up or down to make the turn signal lamps flash three times.
Turn Signal Lamp Indicator
It flashes when you switch the turn signal lamps on.
Note: An increase in the rate of flashing warns of a failed turn signal lamp.
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: DAYTIME RUNNING LAMPS (DRL)
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
Daytime running lamps are always on unless you switch on the headlamps or your vehicle is in park (P).
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: CONFIGURABLE DAYTIME RUNNING LAMPS
Configurable Daytime Running Lamps
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Switch Daytime Running Lights on or off.
The daytime running lamps turn on when all of the following occur:
- You switch the system on.
- You switch your vehicle on.
- The transmission is not in park (P) for vehicles with automatic transmissions or you release the parking brake for vehicles with manual transmissions.
- The lighting control is in the auto lamps position.
- The headlamps are off.
Note: Other lighting control positions do not turn on the daytime running lamps.
EXTERIOR LAMP INDICATORS
Turn Signal Lamp
It flashes when you switch the turn signal lamps on.
Note: An increase in the rate of flashing warns of a failed turn signal lamp.
EXTERIOR LAMPS ON AUDIBLE WARNING
Sounds when you open the driver door and the exterior lamps are on.
AUTOMATIC HIGH BEAM CONTROL
HOW DOES AUTOMATIC HIGH BEAM CONTROL WORK
Automatic high beam control turns the high beams on if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns the high beams off.
A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to turn the high beams on and off.
- A. Without automatic high beam control.
B. With automatic high beam control.
AUTOMATIC HIGH BEAM CONTROL PRECAUTIONS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off.WARNING: The system may not switch the high beams off if the lights of oncoming vehicles are hidden by obstacles, for example guard rails.WARNING: Do not use the system in poor visibility, for example fog, heavy rain, spray or snow.WARNING: You may need to override the system when approaching other road users.WARNING: You may need to override the system during inclement weather.
AUTOMATIC HIGH BEAM CONTROL REQUIREMENTS
The system turns the high beams on if all of the following occur:
- You switch the system on.
You set the lighting control to the auto lamps position.
The ambient light level is low enough that you require high beams.
There is no traffic in front of your vehicle.
The vehicle speed is greater than approximately 25 mph (40 km/h).
AUTOMATIC HIGH BEAM CONTROL LIMITATIONS
The system turns the high beams off if any of the following occur:
- You switch the system off.
You set the lighting control to any position except auto lamps.
The ambient light level is high enough that you do not require high beams. - The system detects an approaching vehicle’s headlamps or a leading vehicle’s tail lamps.
The system detects severe rain, snow or fog. - The system detects street lighting.
- The camera has reduced visibility.
- The vehicle speed falls below approximately 19 mph (30 km/h).
SWITCHING AUTOMATIC HIGH BEAM CONTROL ON AND OFF
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Switch Auto High Beam on or off.
AUTOMATIC HIGH BEAM CONTROL INDICATORS
Illuminates to confirm when the system is ready to assist.
OVERRIDING AUTOMATIC HIGH BEAM CONTROL 
Push the lever away from you to switch the high beams on.
Push the lever away from you again to switch the high beams off.
Push the lever away from you for a third time to switch automatic high beam control back on.
AUTOMATIC HIGH BEAM CONTROL – TROUBLESHOOTING
AUTOMATIC HIGH BEAM CONTROL – INFORMATION MESSAGES
| Message | Description |
| Front Camera Low Visibility Clean Screen | The camera has reduced visibility. Clean the windshield. If the message continues to appear, have your vehicle checked as soon as possible. |
| Front Camera Temporarily Not Available | The camera has malfunctioned. Wait a short period for the camera to cool down. If the message continues to appear, have your vehicle checked as soon as possible. |
| Front Camera Malfunction Service Required | The camera has malfunctioned. Have your vehicle checked as soon as possible. |
FAQs
Up to five people can ride in the 2023 Ford Maverick.
Ford’s SYNC 3 infotainment system, which features a touchscreen display, smartphone connection, and voice commands, is standard on the Maverick.
Yes, both passengers and luggage may enjoy a luxurious and roomy interior on the Maverick.
Yes, the Maverick offers optional options for a better driving experience, like a premium sound system, leather-trimmed seats, and a panoramic sunroof.
The Maverick has a 4.5-foot truck bed that is made to be adaptable and useful for different transportation purposes.
To accommodate different cargo sizes and types, the truck bed has features including a multi-position tailgate, available bed storage solutions, and integrated tie-downs.
One can choose from a variety of exterior colour options, such as white, black, grey, blue, red, and more.
The Maverick’s ground clearance and available all-wheel drive system let it to manage some modest off-road conditions even though it is primarily intended for driving in cities and suburbs.
A variety of cutting-edge safety systems, such as adaptive cruise control, lane-keeping assistance, automatic emergency braking, and more are available in the Maverick.
A comfortable driving stance and plenty of sight are provided by the Maverick’s wide windows, which were developed with optimum visibility in mind.
Yes, the Maverick has a towing capacity. It can tow up to a particular weight, depending on the setup. Depending on the engine option and additional towing packages, the towing capacity may change.
Yes, the Maverick has several inner pockets, cup holders, and storage spaces to assist you in keeping your items in order.
A variety of engine choices are available for the 2023 Maverick, including both conventional gasoline engines and effective hybrid powertrains.
Yes, the Maverick has a smartphone connection built-in using Ford’s SYNC system, enabling you to instantly connect to and control your smartphone apps.
With its small size, hybrid powertrain option, urban-friendly appearance, and adaptable truck bed, the 2023 Ford Maverick stands out and appeals to a particular group of buyers looking for a balance between usefulness and efficiency.
2023 Ford Maverick Specs, Price, Features, Mileage (Brochure)
USEFUL LINKS
View Full PDF:2023 FORD Maverick Owner’s Manual |Auto User Guide
Download Manual: Ford Vehicle Owner Manuals | Ford
Related Article
2023 Ford Bronco Specs, Price, Features, Mileage (Brochure)
2023 FORD TRANSIT VAN Specs, Price, Features, and Mileage (Brochure)
2023 Ford Everest Specs, Price, Features, Mileage (Brochure)
2023 Ford Fiesta Specs, Price, Features and Mileage (Brochure)
