2024 FORD Edge Interior and Exterior Lighting Guide
Step into the future of automotive design with the 2024 Ford Edge, where innovation meets sophistication in every aspect, particularly the eye-catching interior and exterior lighting elements. The Edge captivates you from the moment you walk in with its trademark lighting system, which perfectly blends functionality and style. As you enter, you’re met by an environment filled with precision-crafted ambient lighting, which sets the tone for your adventure ahead. The attention to detail extends to the outside, where the Edge’s dynamic LED headlights not only give excellent visibility but also create a powerful statement on the road, improving both safety and aesthetics. Whether navigating city streets or starting on a nighttime trip, the 2024 Ford Edge’s finely engineered lighting enriches the driving experience, exemplifying modern automotive brilliance.
2024 Ford Edge Review, Specs, Price And Mileage (Brochure)
EXTERIOR LIGHTING CONTROL
- A Lamps off.
- B Parking lamps on.
- C Headlamps on.
- D Autolamps on.
Rotate the control to make a selection.
HEADLAMPS
USING THE HIGH BEAM
HEADLAMPS
Push the lever away from you to switch the high beam on.
Push the lever away from you again or pull the lever toward you to switch the high beam off.
Slightly pull the lever toward you and release it to flash the headlamps.
SWITCHING HEADLAMP EXIT DELAY ON AND OFF
To switch headlamp exit delay on, pull the turn signal lever toward you after switching your vehicle off.
To switch headlamp exit delay off, pull the turn signal lever toward you again or switch your vehicle on.
Note: The headlamps turn off after three minutes with any door open or 30 seconds after the last door closes.
HEADLAMP INDICATORS
Lamps On
Illuminates when you switch the low beam headlamps or the parking lamps on.
Headlamp High BeamIlluminates when you switch the high beam headlamps on.
HEADLAMPS –
TROUBLESHOOTING
HEADLAMPS – FREQUENTLY ASKED QUESTIONS
Why is there condensation in the headlamps?
- Headlamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
How much condensation is acceptable?
- The presence of a fine mist, for example no streaks, drip marks or large droplets. A fine mist covers less than 50% of the lens.
How long does it take for the acceptable condensation to clear?
- Clearing time can take as long as 48 hours under dry weather conditions.
How much condensation is unacceptable?
- A water puddle inside the lamp. Streaks, drip marks or large droplets present on the interior of the lens.
What should I do if unacceptable condensation is present?
- Have your vehicle checked as soon as possible.
Why do my headlamps turn off when I have them switched on when I switch my vehicle off?
- The battery saver turns the headlamps off after a short period of time after you switch your vehicle off.
AUTOLAMPS
WHAT ARE AUTOLAMPS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example daytime fog.
.Autolamps turn the headlamps on in low light situations or when the windshield wipers operate.
AUTOLAMP SETTINGS
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Select Autolamp Delay.
- Select a setting and press the OK button.
EXTERIOR LAMPS
USING THE TURN SIGNAL LAMPS
Push the lever up or down to switch the turn signal lamps on.
Set the lever to the middle position to switch the turn signal lamps off.
Note: Tap the lever up or down to make the turn signal lamps flash three times.
Turn Signal Lamp Indicator
It flashes when you switch the turn signal lamps on.
Note: An increase in the rate of flashing warns of a failed turn signal lamp.
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: CONFIGURABLE DAYTIME RUNNING LAMPS
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Switch Daytime Running Lights on or off.
The daytime running lamps turn on when all of the following occur:
- You switch the system on.
- You switch your vehicle on.
- The transmission is not in park (P) for vehicles with automatic transmissions or you release the parking brake for vehicles with manual transmissions.
- The lighting control is in the auto lamps position.
- The headlamps are off.
Note: Other lighting control positions do not turn on the daytime running lamps.
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: DAYTIME RUNNING LAMPS (DRL)
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
Daytime running lamps are always on unless you switch on the headlamps or your vehicle is in park (P).
USING THE FRONT FOG LAMPS (If Equipped)
To switch the lamps on or off:
- Set the lighting control to the parking lamps, headlamps or autolamps position.
Note: When the lighting control is in the auto lamps position, you cannot switch the fog lamps on unless the low beam headlamps are on. 
Press the button on the lighting control to switch the front fog lamps on or off.
Note: Only switch the front fog lamps on during reduced visibility.
Note: The brightness of the daytime running lamps may decrease when the front fog lamps are switched on.
Note: The front fog lamps lights switch off automatically when high beams are activated.
Front Fog Lamps Indicator
It illuminates when you switch the front fog lamps on.
AUTOMATIC HIGH BEAM
CONTROL
HOW DOES AUTOMATIC HIGH BEAM CONTROL WORK
Automatic high beam control turns the high beams on if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns the high beams off.
A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to turn the high beams on and off.
- Without automatic high beam control.
- With automatic high beam control.
AUTOMATIC HIGH BEAM CONTROL PRECAUTIONS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off.
WARNING: The system may not switch the high beams off if the lights of oncoming vehicles are hidden by obstacles, for example guard rails.
WARNING: You may need to override the system when approaching other road users.
WARNING: In situations with poor visibility, such as fog, heavy rain or other inclement weather, you may need to override or completely switch off the system.
AUTOMATIC HIGH BEAM CONTROL REQUIREMENTS
The system turns the high beams on if all of the following occur:
- You switch the system on.
- You set the lighting control to the auto lamps position.
- The ambient light level is low enough that you require high beams.
- There is no traffic in front of your vehicle.
- The vehicle speed is greater than approximately 32 mph (52 km/h).
AUTOMATIC HIGH BEAM CONTROL LIMITATIONS
The system turns the high beams off if any of the following occur:
- You switch the system off.
- You set the lighting control to any position except auto lamps.
- The ambient light level is high enough that you do not require high beams.
- The system detects an approaching vehicle’s headlamps or a leading vehicle’s tail lamps.
- The system detects severe rain, snow or fog.
- The system detects street lighting.
- The camera has reduced visibility.
- The vehicle speed falls below approximately 27 mph (44 km/h).
Note: The deactivation speed may be lower on curves.
SWITCHING AUTOMATIC HIGH BEAM CONTROL ON AND OFF
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- Switch Auto High Beam on or off.
AUTOMATIC HIGH BEAM CONTROL INDICATORS
Illuminates to confirm when the system is ready to assist.
OVERRIDING AUTOMATIC HIGH BEAM CONTROL
Push the lever away from you to switch the high beam on.
Push the lever away from you again to switch the high beam off.
Push the lever away from you for a third time to switch the automatic high beam control back on.
AUTOMATIC HIGH BEAM CONTROL – TROUBLESHOOTING
AUTOMATIC HIGH BEAM CONTROL – INFORMATION MESSAGES
|
Message |
Details |
|
Front Camera Low Visib- ility Clean Screen |
The camera has reduced visibility. Clean the windshield. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Front Camera Temporarily Not Available |
The camera has malfunctioned. Wait a short period of time for the camera to cool down. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Front Camera Malfunc- tion Service Required |
The camera has malfunctioned. Have your vehicle checked as soon as possible. |
ADAPTIVE FRONT LIGHTING
HOW DOES ADAPTIVE FRONT LIGHTING WORK
Adaptive front lighting adapts when you are steering around a curve or if the camera detects lane markings indicating a curve.
- A Without adaptive front lighting.
- B With adaptive front lighting.
SWITCHING ADAPTIVE FRONT LIGHTING ON AND OFF
- Using the instrument cluster controls on the steering wheel, select Settings.
- Select Vehicle.
- Select Lighting.
- 4. Switch Adaptive Headlamps on or off.
Set the lighting control to the auto lamps position to use the adaptive front lighting.
EXTERIOR LIGHTING VIDEOS
Automatic headlamps with wiper-activated
headlamp feature Video Link
Intelligent Three Blink Turn Signal Video
Link
Configurable Daytime Running Lamps
Auto High Beams
Interior Lighting
SWITCHING ALL OF THE INTERIOR LAMPS ON AND OFF
The lamps turn on under the following conditions:
- You open any door.
- You press a button on the remote control.
- You press the all lamps on button on the overhead console.
Press to switch all interior lamps on or off.
SWITCHING THE FRONT INTERIOR LAMPS ON AND OFF
The front interior lamp switches are on the overhead console.
Note: The position of each button on the overhead console depends on your vehicle.
Individual Map Lamps
Press to switch the left-hand individual dome lamp on and off.
Press to switch the right-hand individual dome lamp on and off.
SWITCHING THE REAR INTERIOR LAMPS ON AND OFF
The rear interior lamps may be above the rear seat or above the rear windows.
Press to switch the lamps on or off.
Note: If you switch the rear lamps on through the overhead console, you cannot switch them off with the rear lamp switch.
INTERIOR LAMP FUNCTION
WHAT IS THE INTERIOR LAMP FUNCTION
The interior lamp function switches the courtesy and door lamps on or off.
SWITCHING THE INTERIOR LAMP FUNCTION ON AND OFF
Press to switch the interior lamp function on and off.
Note: The indicator lamp illuminates amber when the door function is off.
ADJUSTING THE INSTRUMENT PANEL LIGHTING BRIGHTNESS
The instrument lighting dimmer buttons are on the lighting control.
Repeatedly press one of the buttons to adjust the brightness.
AMBIENT LIGHTING (IF EQUIPPED)
SWITCHING AMBIENT LIGHTING ON AND OFF
- From the settings menu, press General.
- Press Ambient Light.
- Press a color.
ADJUSTING AMBIENT LIGHTING
Drag the selected color up or down.
INTERIOR LIGHTING – TROUBLESHOOTING
INTERIOR LIGHTING –FREQUENTLY ASKED QUESTIONS
Why do my courtesy lamps or interior lamps turn off when I have them switched on when I switch my vehicle off?
- The battery saver turns the courtesy lamps and interior lamps off after a short period of time after you switch your vehicle off.
FAQs
The 2024 FORD Edge interior lighting is notable for its precision-crafted ambient lighting, which provides a compelling environment within the vehicle.
The 2024 FORD Edge’s external illumination, notably its dynamic LED headlights, delivers excellent visibility, boosting road safety.
Yes, the interior lighting options in the 2024 FORD Edge are customisable, letting drivers to adapt the ambiance to their liking.
Yes, the 2024 FORD Edge includes revolutionary lighting technologies like automated interior illumination, which makes it easier for people to approach and exit the car in low-light settings
The 2024 Ford Edge uses ambient lighting to create an inviting environment within the vehicle, improving the entire driving experience for occupants.
The 2024 FORD Edge’s characteristic lighting system is a unique element that perfectly integrates functionality and style, making the car readily recognisable on the road.
Yes, the 2024 FORD Edge’s external design has dynamic LED headlights, which enhance sophistication while boosting driver visibility.
The lighting system of the 2024 Ford Edge adds to its modern appeal by incorporating innovative LED technology, which improves both appearances and performance
Yes, the 2024 Ford Edge’s external lighting is engineered to adapt to changing driving circumstances, offering maximum visibility and safety at all times.
Lighting is an important part of the overall design philosophy of the 2024 FORD Edge, emphasising both functionality and aesthetics to produce a seamless and exciting driving experience.
Yes, the 2024 FORD Edge has innovative lighting features like adjustable headlights, which modify their beam pattern to match driving circumstances and increase nighttime vision.
The inside lighting of the 2024 FORD Edge adds to passenger comfort by creating a warm and inviting atmosphere, improving the entire driving experience for everyone inside the car.
Yes, the 2024 FORD Edge includes energy-efficient LED lighting options that not only save power but also give long-lasting performance for increased dependability.
Yes, the external lighting of the 2024 FORD Edge can be tailored to individual preferences, letting drivers to select from a variety of lighting styles and intensities.
The lighting system in the 2024 FORD Edge represents Ford’s dedication to innovation, as it incorporates cutting-edge LED technology.
Useful Links
View Full PDF: 2024 FORD Edge Owner’s Manual|Auto User Guide