2024 FORD Maverick Interior and Exterior Lighting Guide
The 2024 Ford Maverick is a shining example of inventiveness in the rapidly changing field of automotive innovation, especially with regard to its features for interior and exterior lighting. Ford has painstakingly designed the Maverick’s lighting system with an eye towards both utility and style in order to bring the driving experience to new levels. A sophisticated and contemporary atmosphere greets you as soon as you enter the cabin, thanks to well-placed LED lighting that not only creates a warm and inviting interior but also improves visibility for crucial functions, making every trip more than just a drive but an immersive experience. On the outside, however, the Maverick’s lighting design skillfully combines style and functionality, featuring streamlined LED headlights that draw attention wherever they go in addition to providing brilliant, clear road illumination. The interior and exterior lighting of the 2024 Ford Maverick sets a new benchmark for automotive quality and is a monument to Ford’s unwavering commitment to innovation, safety, and style from dusk till dawn.
2024 Ford Maverick Specs, Price, Features, Mileage and Review
Exterior Lighting
EXTERIOR LIGHTING CONTROL
- A Lamps off.
- B Parking lamps on.
- C Autolamps on.
- D Headlamps on.
Rotate the control to make a selection.
Note: The lighting control defaults to autolamps every time you switch your vehicle on.
HEADLAMPS
USING THE HIGH BEAM HEADLAMPS
Push the lever away from you to switch the high beams on.
Push the lever forward again or pull the lever toward you to switch the high beams off.
Slightly pull the lever toward you and release it to flash the headlamps.
Note: Continuous activation only with headlamps on.
SWITCHING HEADLAMP EXIT DELAY ON AND OFF
To switch the headlamp, exit delay on, pull the turn signal lever toward you after switching your vehicle off.
To switch the headlamp exit, delay-off, pull the turn signal lever toward you again or switch your vehicle on.
Note: The headlamps turn off after three minutes with any door open or 30 seconds after the last door closes.
HEADLAMP INDICATORS
Lamps On
Illuminates when you switch the low beam headlamps or the parking lamps on.
Headlamp High Beam
Illuminates when you switch the high beam headlamps on.
HEADLAMPS TROUBLESHOOTING
HEADLAMPS FREQUENTLY ASKED QUESTIONS
Why is there condensation in the headlamps?
- Headlamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
How much condensation is acceptable?
- The presence of a fine mist, for example, no streaks, drip marks or large droplets. A fine mist covers less than 50% of the lens.
How long does it take for the acceptable condensation to clear?
- Clearing time can take as long as 48 hours under dry weather conditions.
How much condensation is unacceptable?
- A water puddle inside the lamp. Streaks, drip marks or large droplets are present on the interior of the lens.
What should I do if unacceptable condensation is present?
- Have your vehicle checked as soon as possible.
Why do my headlamps turn off when I have them switched on when I switch my vehicle off?
- The battery saver turns the headlamps off after a short period of time after you switch your vehicle off.
AUTOLAMPS
WHAT ARE AUTO LAMPS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example, daytime fog.
Autolamps turn the headlamps on in low-light situations or when the windshield wipers operate.
AUTOLAMP SETTINGS
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Lighting.
- Press Auto lamp Delay.
- Press a setting.
EXTERIOR LAMPS
USING THE TURN SIGNAL LAMPS
Push the lever up or down to switch the turn signal lamps on.
Set the lever to the middle position to switch the turn signal lamps off.
Note: Tap the lever up or down to make the turn signal lamps flash three times.
Turn Signal Lamp Indicator
It flashes when you switch the turn signal lamps on.
Note: An increase in the rate of flashing warns of a failed turn signal lamp.
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: CONFIGURABLE DAYTIME RUNNING LAMPS
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Lighting.
- Switch Daytime Running Lights on or off.
The daytime running lamps turn on when all of the following occur:
- You switch the system on.
- You switch your vehicle on.
- The transmission is not in park (P) for vehicles with automatic transmissions or you release the parking brake for vehicles with manual transmissions.
- The lighting control is in the auto-lamps position.
- The headlamps are off.
Note: Other lighting control positions do not turn on the daytime running lamps.
SWITCHING THE DAYTIME RUNNING LAMPS ON AND OFF -VEHICLES WITH: DAYTIME RUNNING LAMPS (DRL)
WARNING: The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
Daytime running lamps are always on unless you switch on the headlamps or your vehicle is in park (P).
SWITCHING WELCOME LIGHTING ON AND OFF
Welcome lighting turns on the exterior lamps when you approach your vehicle with an authenticated device.
- Press Settings on the touchscreen.
- Press Vehicle.
- Press Lighting.
- Switch Welcome Lighting on or off.
The daytime running lamps turn on when all of the following occur:
-
You switch the system on.
-
You switch your vehicle on.
-
The transmission is not in park (P) for vehicles with automatic transmissions or you release the parking brake for vehicles with manual transmissions.
-
The lighting control is in the autolamps position.
-
The headlamps are off.
Note: Other lighting control positions do not turn on the daytime running lamps.
EXTERIOR LAMP INDICATORS
Turn Signal Lamp
It flashes when you switch the turn signal lamps on.
Note: An increase in the rate of flashing warns of a failed turn signal lamp.
EXTERIOR LAMPS ON AUDIBLE WARNING
Sounds when you open the driver door and the exterior lamps are on.
AUTOMATIC HIGH BEAM CONTROL
HOW DOES AUTOMATIC HIGH BEAM CONTROL WORK
Automatic high beam control turns the high beams on if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns the high beams off.
A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to turn the high beams on and off.
- A: Without automatic high beam control.
- B: With automatic high beam control.
AUTOMATIC HIGH BEAM CONTROL PRECAUTIONS
WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off.
WARNING: The system may not switch the high beams off if the lights of oncoming vehicles are hidden by obstacles, for example guard rails.
WARNING: You may need to override the system when approaching other road users.
WARNING: In situations with poor visibility, such as fog, heavy rain or other inclement weather, you may need to override or completely switch off the system.
AUTOMATIC HIGH BEAM CONTROL REQUIREMENTS
The system turns the high beams on if all of the following occur:
- You switch the system on.
- You set the lighting control to the autolamps position.
- The ambient light level is low enough that you require high beams.
- There is no traffic in front of your vehicle.
- The vehicle speed is greater than approximately 32 mph (52 km/h).
AUTOMATIC HIGH BEAM CONTROL LIMITATIONS
The system turns the high beams off if any of the following occur:
- You switch the system off.
- You set the lighting control to any position except autolamps.
- The ambient light level is high enough that you do not require high beams.
- The system detects an approaching vehicle’s headlamps or a leading vehicle’s tail lamps.
- The system detects severe rain, snow or fog.
-
The system detects street lighting.
-
The camera has reduced visibility.
-
The vehicle speed falls below approximately 27 mph (44 km/h).
Note: The deactivation speed may be lower on curves.
SWITCHING AUTOMATIC HIGH BEAM CONTROL ON AND OFF
-
Using the instrument cluster controls on the steering wheel, select Settings.
-
Select Vehicle.
-
Select Lighting.
-
Switch Auto High Beam on or off.
AUTOMATIC HIGH BEAM CONTROL INDICATORS
Illuminates to confirm when the system is ready to assist.
OVERRIDING AUTOMATIC HIGH BEAM CONTROL
Push the lever away from you to switch the high beams on.
Push the lever away from you again to switch the high beams off.
Push the lever away from you for a third time to switch automatic high beam control back on.
AUTOMATIC HIGH BEAM CONTROL TROUBLESHOOTING
AUTOMATIC HIGH BEAM CONTROL INFORMATION MESSAGES
|
Message |
Details |
|
Front Camera Low Visib- ility Clean Screen |
The camera has reduced visibility. Clean the windshield. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Front Camera Temporarily Not Available |
The camera has malfunctioned. Wait a short period of time for the camera to cool down. If the message continues to appear, have your vehicle checked as soon as possible. |
|
Front Camera Malfunction Service Required |
The camera has malfunctioned. Have your vehicle checked as soon as possible. |
SWITCHING ALL OF THE INTERIOR LAMPS ON AND OFF
The lamps turn on under the following conditions:
-
You open any door.
-
You press a button on the remote control.
-
You press the all lamps on button on the overhead console.
Press to switch all interior lamps on or off.
SWITCHING THE FRONT INTERIOR LAMPS ON AND OFF
Press the edge of the lamp lens.
SWITCHING THE REAR INTERIOR LAMPS ON AND OFF
Press the edge of the lamp lens.
Note: If you switch the rear lamps on through the overhead console, you cannot switch them off with the rear lamp switch.
INTERIOR LAMP FUNCTION WHAT IS THE INTERIOR LAMP FUNCTION
The interior lamp function switches the courtesy and door lamps on or off.
SWITCHING THE INTERIOR LAMP FUNCTION ON AND OFF
Set the switch to the middle position.
ADJUSTING THE INSTRUMENT PANEL LIGHTING BRIGHTNESS
The instrument lighting dimmer buttons are on the lighting control.
Repeatedly press one of the buttons to adjust the brightness.
AMBIENT LIGHTING (IF EQUIPPED)
SWITCHING AMBIENT LIGHTING ON AND OFF – VEHICLES WITHOUT: SYNC 3
- Press Settings on the touchscreen.
- Press Vehicle Settings.
- Press Ambient Light.
Drag the slider above zero brightness to switch ambient lighting on.
Drag the slider to zero brightness to switch ambient lighting off.
SWITCHING THE INTERIOR LAMP FUNCTION ON AND OFF
The switch is on the overhead console.
Set the switch to the middle position.
When you switch the interior lamp function on, the interior lamps turn on if:
- You open a door.
- You press the unlock button on the remote control.
- You switch the ignition off.
ADJUSTING THE INSTRUMENT PANEL LIGHTING BRIGHTNESS
The instrument lighting dimmer buttons are on the lighting control.
Repeatedly press one of the buttons to adjust the brightness.
AMBIENT LIGHTING
SWITCHING AMBIENT LIGHTING ON AND OFF
- From the My Mustang menu, press My Colour. See My Mustang Overview.
- Press Ambient Light.
- Use the arrows to select a colour and brightness.
Note: Setting the brightness to zero turns off the ambient lighting.
INTERIOR LIGHTING TROUBLESHOOTING
INTERIOR LIGHTING FREQUENTLY ASKED QUESTIONS
Why do my courtesy lamps or interior lamps turn off when I have them switched on when I switch my vehicle off?
- The battery saver turns the courtesy lamps and interior lamps off after a short period of time after you switch your vehicle off.
FAQs
Ambient LED lighting is available in a variety of customisable colours on the 2024 Ford Maverick to fit your style and mood.
Indeed, for improved visibility and appearance, the 2024 Ford Maverick has energy-efficient LED headlights, taillights, and daytime running lights.
Yes, you may customise the inside lighting in the 2024 Ford Maverick to create the ideal mood for your drive.
Indeed, the 2024 Ford Maverick’s cargo space has LED lighting to make it easier for you to find and arrange your belongings even in low light.
The 2024 Ford Maverick’s external lighting boasts cutting-edge technology including adaptive headlights and automated high beams, which increase visibility and safety for drivers and other road users.
The external lighting of the 2024 Ford Maverick uses LED lights, which are intended to last a lot longer than conventional halogen bulbs and require fewer replacements over time.
It is true that you can customise the outside lighting experience of the 2024 Ford Maverick to fit your driving conditions and tastes.
Yes, the 2024 Ford Maverick has iconic LED lighting features that give its external design a sophisticated and stylish touch. These aspects include the unique daytime running lights and sequential turn signals.
The 2024 Ford Maverick’s interior lighting has been thoughtfully planned to improve the driving experience by creating a warm and inviting atmosphere for the driver and passengers.
Yes, the 2024 Ford Maverick’s cabin has a contemporary, opulent feel thanks to cutting-edge interior lighting elements like dynamic ambient lighting and LED door sill plates.
In reality, the 2024 Ford Maverick’s external lighting has adaptive capabilities that let the car recognise and alter the headlight’s direction and intensity based on things like steering angle and speed.
You can select from a variety of colours for the ambient inside lighting of the 2024 Ford Maverick to fit your preferences and mood.
Yes, you may further customise your car with the optional lighting packages available for the 2024 Ford Maverick. These packages include LED puddle lights, illuminated running boards, and improved interior ambient lighting.
The 2024 Ford Maverick’s external lighting components are expertly incorporated into its aerodynamic shape, boosting both its road performance and visual attractiveness.
Indeed, the exterior and interior of the 2024 Ford Maverick are equipped with energy-efficient LED lighting, which uses less energy and has a smaller environmental effect than standard lighting systems.
Useful Links
View Full PDF: 2024 FORD Maverick Owner’s Manual|Auto User Guide
2024 Ford Maverick Specs, Price, Features, Mileage and Review