Dashboard Indicators Guide: 2022 FORD E-450 Instrument Cluster
In the 2022 Ford E-450, the instrument cluster is an important source of information. Its many dashboard indicators give drivers important information about the car’s state and performance. These lights do a lot of different things. They can be used as simple instructions, like when to buckle up, or as more serious warnings, like when the engine isn’t working right or the tire pressure is off. Understanding what these dashboard signs mean is very important for keeping the vehicle safe and running well. This way, drivers can respond quickly to any problems that arise, making sure they have a safe and smooth ride in their 2022 Ford E-450.
2023 Ford Maverick Specs, Price, Features and Mileage (Brochure)
GAUGES
2.3 Inch Display
- An Engine oil pressure gauge.
- B Engine coolant temperature gauge.
- C Fuel gauge.
- D Transmission fluid temperature gauge.
- E Speedometer.
- F Information display.
- G Tachometer.
8 Inch Display
- An Engine oil pressure gauge.
- B Engine coolant temperature gauge.
- C Fuel gauge.
- D Transmission fluid temperature gauge.
- E Speedometer.
- F Information display.
- G Tachometer.
Engine Oil Pressure Gauge
Indicates engine oil pressure. At normal operating temperature, the level indicator is in the normal range. If the pressure gauge falls below the normal range, stop your vehicle, switch off the engine and check the engine oil level. Add oil if needed. If the oil level is correct, have your vehicle checked by an authorized dealer.
Engine Coolant Temperature Gauge
WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
Indicates engine coolant temperature. At normal operating temperature, the level indicator is in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as possible, switch off the engine and let the engine cool.
Fuel Gauge
The fuel gauge indicates how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note: The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
- A low fuel level reminder displays and sounds when the distance to empty reaches 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
- Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Distance to Empty
- Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank.
- Changes in driving patterns can cause the value to not only decrease but also increase or stay constant for periods.
Transmission Fluid Temperature Gauge
- Indicates transmission fluid temperature.
- At normal operating temperature, the level indicator is in the normal range.
- If the transmission fluid temperature exceeds the normal range, stop your vehicle as soon as possible and verify the airflow is not restricted by snow or debris blocking airflow through the grille.
- Special operating conditions such as snowplowing, towing, or off-road use may cause higher than normal operating temperatures.
- See Special Operating Conditions Scheduled Maintenance.
- To lower the transmission temperature into the normal range, alter the severity of your driving conditions.
- Operating the transmission for extended periods with the gauge in the higher-than-normal area may cause internal transmission damage.
- If the gauge continues to show high temperatures, see an authorized dealer.
WARNING LAMPS AND INDICATORS
- The following warning lamps and indicators alert you to a vehicle condition that may become serious.
- Some lamps illuminate when you start your vehicle to make sure they work.
- If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and operate the same as a warning lamp but do not illuminate when you start your vehicle.
- Airbag Warning Lamp
- If it does not illuminate when you switch the ignition on, continues to flash or remains on when the engine is running, this indicates a malfunction.
- Have your vehicle checked as soon as possible.
- Anti-Lock Brake System Warning Lamp
- If it illuminates when you are driving, this indicates a malfunction.
- Your vehicle continues to have normal braking without the anti-lock brake system function.
- Have your vehicle checked as soon as possible.
- Battery
- If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical equipment and have an authorized dealer check the system immediately.
- Brake System Warning Lamp
- WARNING: Driving your vehicle with the warning lamp on is dangerous.
- A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible.
- Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
- Note: Indicators vary depending on region.
- This lamp is a dual-function lamp and will illuminate when:
- You apply the parking brake with the ignition on.
- Your vehicle has a brake fault or low brake fluid level, regardless of the parking brake position.
- If the lamp illuminates while you are moving, you may have the parking brake applied. Be sure that the parking brake is off.
- Have your vehicle checked as soon as possible if the lamp continues to illuminate.
- Cruise Control Indicator (If Equipped)
- It illuminates when you switch the system on.
- See What Is Cruise Control.
- Direction Indicator
- Illuminates when you switch on the left or right direction indicator or the hazard warning flasher.
- If the indicators stay on or flash faster, check for a burned-out bulb.
- Engine Coolant Temperature Warning Lamp
- If it illuminates when your vehicle is moving, this indicates that the engine is overheating.
- Stop your vehicle as soon as it is safe to do so and switch the engine off. Have your vehicle checked as soon as possible.
- Engine Oil
- It illuminates when you switch the ignition on.
- If it illuminates when the engine is running this indicates a malfunction.
- Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level.
- If the oil level is sufficient, this indicates a system malfunction.
- Have your vehicle checked as soon as possible.
- See Engine Oil Check.
- Fasten Seatbelt Warning Lamp
- It illuminates and a tone sounds until you fasten the seatbelts.
- Headlamp High Beam Indicator
- It illuminates when you switch the headlamp high beam on.
- Low Fuel Level Warning Lamp
- If it illuminates when you are driving, refuel as soon as possible.
- Low Tire Pressure Warning Lamp (If Equipped)
- It illuminates if the tire pressure in one or more tires is below the correct tire pressure.
- It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional.
- If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by your authorized dealer.
- Powertrain Malfunction/Electronic Throttle Control
- Illuminates when the system detects a powertrain fault, have an authorized dealer check the system as soon as possible.
- Service Engine Soon
- If it illuminates when the engine is running this indicates a malfunction.
- The onboard diagnostics system has detected a malfunction of the vehicle emission control system.
- If it flashes, an engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components.
- Avoid heavy acceleration and deceleration and have your vehicle serviced immediately.
- It illuminates when you switch the ignition on before the engine starts to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance (I/M) testing.
- Normally, it illuminates until the engine is cranked and automatically turns off if no malfunctions are present.
- However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing.
- See Emission Law.
- Traction Control Indicator
- It flashes during a traction control event.
- If it does not illuminate when you switch the ignition on, or remains on when the engine is running, this indicates a malfunction.
- Have your vehicle checked as soon as possible.
- Traction Control System Off
- It will illuminate when the driver disables traction control.
- Tow Haul Indicator
- Illuminates when the driver activates the tow/haul feature.
- If the light flashes steadily, have an authorized dealer check the system immediately, damage to the transmission could occur.
AUDIBLE WARNINGS AND INDICATORS
Headlamps On Warning Chime
- Sounds when you remove the key from the ignition and open the driver’s door and you have left the headlamps or parking lamps on.
Key in Ignition Warning Chime
- Sounds when you open the driver’s door and you have left the key in the ignition.
Parking Brake On Warning Chime
- Sounds like you have left the parking brake on and drive your vehicle.
- If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
FAQs
The Instrument Cluster provides essential information about the vehicle’s status and performance, including speed, fuel level, engine temperature, mileage, and various warning lights and indicators.
Typically, you can use buttons or controls on the steering wheel or dashboard to navigate through the various screens and information options.
Yes, many modern Instrument Clusters allow for customization, enabling you to choose which data to display or change the display theme to suit your preferences.
You can typically adjust the brightness settings in the vehicle’s settings menu. This allows you to set different brightness levels for day and night driving.
You can expect to see information like vehicle speed, fuel level, engine temperature, mileage, trip information, tire pressure, and more, depending on the vehicle’s configuration.
Many modern vehicles offer navigation integration, allowing you to see turn-by-turn directions and other navigation-related information on the Instrument Cluster.
Some vehicles allow smartphone integration with the Instrument Cluster, enabling hands-free calling and displaying message notifications. Check if your E-450 supports this feature.
The Instrument Cluster often displays warnings for seatbelt usage, airbag status, low fuel, low tire pressure, and other safety-related alerts.
Typically, you can reset trip information or mileage through the vehicle’s settings menu.
If you experience issues like a blank screen or incorrect information displayed, for troubleshooting steps.
Yes, the Instrument Cluster may display legal notices and compliance information related to safety and emissions standards.
Most driver-assist features are accessed and controlled through the vehicle’s settings menu or dedicated buttons on the steering wheel.
Useful Links
View Full PDF: 2022 FORD E-450 User Manual | Auto User Guide
Fuses and Relay Guide: 2022 FORD E-450 Fuse Diagrams
2023 Ford Maverick Specs, Price, Features and Mileage (Brochure)