2022 Genesis G80 Instrument Cluster | Dashboard Instructions
The instrument panel of the 2022 Genesis G80 is elegant and futuristic, combining state-of-the-art technology and a streamlined appearance. The cluster is equipped with a high-resolution digital display that presents crucial driving information understandably and straightforwardly. Drivers can customize the cluster with configurable settings to show the information that matters most to them, such as safety alerts, navigation instructions, and vehicle performance information. The 2022 Genesis G80 instrument cluster serves as a primary focus for information and control thanks to the incorporation of advanced driver assistance functions, which improves the driving experience overall and reflects the car’s dedication to innovation and user-centric design.
2023 Genesis G80 Specs, Price, Features, Mileage (Brochure)
INSTRUMENT CLUSTER
The actual cluster in the vehicle may differ from the illustration. For more information, refer to the “Gauges and meters” section in this chapter.
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display
Information
Detailed information on 3D instrument cluster is provided later in this chapter.
Instrument Cluster Control
Instrument panel illumination (if equipped)
When the vehicle’s position lights or headlamps are on, press the illumination control switch to adjust the brightness of the instrument panel illumination. When pressing the illumination control switch, the interior switch illumination intensity is also adjusted.
WARNING
Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or vehicle damage.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches to the maximum or minimum level, a chime will sound.
Gauges and Meters
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine coolant temperature gauge (for 12.3-inch 3D cluster)
This gauge indicates the temperature of the engine coolant when the Engine Start/Stop button is in the ON position.
NOTICE
If the gauge pointer moves beyond the normal range area toward the “H (Hot)” position, it indicates overheating that may damage the engine.
Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” section in chapter 8.
WARNING
Never remove the engine coolant reservoir cap when the engine is hot. The engine coolant is under pressure and could cause severe burn. Wait until the engine is cool before adding coolant to the reservoir.
Information
For the 8-inch instrument cluster, you can check the engine coolant temperature in the Utility view on the cluster.
Refer to the “View Modes” section in chapter 4.
Fuel gauge
Information
- The fuel tank capacity is given in chapter 2.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
Running out of fuel can expose vehicle occupants to danger.
You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge
This gauge indicates the current outside air temperatures by 1°F (1°C). Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) You can change the temperature unit from the Settings menu in the infotainment system screen.
Select:
Setup General Setting Unit Temperature Unit C /F
See additional information in supplied Infotainment Manual.
For vehicles equipped with Automatic Climate Control, you can also:
- Press the AUTO button while pressing the OFF button on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and climate control screen will change.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Distance to empty
- The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the distance to the empty function may not operate correctly.
- The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
- The trip computer may not register additional fuel if less than 1.6 gallons (6 liters) of fuel are added to the vehicle.
- The distance to empty may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Fuel economy (for 12.3-inch 3D cluster)
The average fuel economy (1) and instant fuel economy (2) is displayed at the bottom of the cluster.
Automatic reset
To automatically reset the average fuel economy, select between “After Ignition” or “After Refueling” from the Settings menu in the infotainment system screen.
Information
For the 8-inch instrument cluster, you can check the fuel economy in the Utility view on the cluster. Refer to the”View Modes” section in the chapter
Transmission Shift Indicator
Automatic transmission shift indicator
This indicator informs the current gear engaged.
FAQs
The controls on the dashboard can be used to change the instrument cluster’s brightness. Check the settings for the brightness control menu or button.
Generally, you can alter the information shown on the instrument cluster in the 2022 Genesis G80. To find customization possibilities, check the infotainment system or car settings.
Low gasoline, problems with tire pressure, and engine troubles are common warning signs.
Generally, you can clear the trip odometer on the instrument cluster by finding and depressing the trip button for a brief period.
Depending on the model, certain cars allow the instrument cluster to have adjustable colors or themes. To access these choices, go to the infotainment system’s settings menu.
The 2022 Genesis G80 is one of many current cars that has real-time fuel economy data displayed on the instrument cluster.
Use the controls on the steering wheel to navigate through different information screens. There are usually buttons dedicated to cycling through various displays. Use the controls on the steering wheel to navigate through different information screens. There are usually buttons dedicated to cycling through various displays.
To improve visibility at night, a lot of cars come equipped with a night mode that modifies the instrument cluster’s color and brightness. Examine this option’s settings.
The “Check Engine” light can point to a problem with the engine or the emissions control system. When this light comes on, it’s best to get your car checked out by a trained mechanic.
To set up and utilize the navigation information on the instrument cluster, go to the infotainment system’s navigation settings. This will allow you to customize the navigation information on the instrument cluster. For guidance, adhere to the on-screen instructions.
Certain cars are equipped with smartphone integration. Make sure your smartphone is set up and connected to the internet for this feature.
Yes, most contemporary cars have tire pressure monitoring systems installed, and the data is frequently shown on the instrument cluster.
This could entail clicking on particular buttons or navigating through particular menus.
Useful Links
View Full PDF: Genesis G80 2022 User Manual| Auto User Guide