With the 2023 Genesis GV70 Seats and Seat Belt, you’re about to embark on an astonishing trip through the world of automobile comfort and safety. The seats and seat belt systems of the 2023 Genesis GV70 are a symphony of luxury, ergonomics, and cutting-edge safety technologies that revolutionize the driving experience in this age of advanced engineering and innovation. The 2023 Genesis GV70’s seats are more than just places to sit; they are meticulously created works of art intended to envelop you in luxurious comfort. These seats are evidence of Genesis’ dedication to making your car a refuge, whether you’re driving cross-country or just getting through your daily commute. However, the 2023 Genesis GV70’s seat belt system, which is outfitted with the most advanced restraint technology, is more important than just comfort.

It is a key component of safety. We will examine the opulent materials, unique adjustability, and cutting-edge safety features that set these seats and seat belts apart from the competition as we go deeper into their world. The 2023 Genesis GV70 Seats and Seat Belt will catch your attention, whether you enjoy the finer things in life or safety above all else. So let’s set out on a journey to learn how Genesis has expertly combined comfort and safety to raise the bar for your driving experience.

SEATS

Front seat

1. Seat sliding forward or rearward /Seat cushion tilt / Seat cushion height
2. Seatback angle
3. Seat cushion extension / Seat cushion support
4. Lumbar support
5. Seatback bolster
6. Comfortable stretch
7. Seat warmer / Air ventilation seat
8. Head restraint
9. Walk-in seat switch
10. Rear HVAC adjustment Rear seat
11. Seatback angle (Manual)
12. Head restraint
13. Armrest
14. Seat warmer / Air ventilation seat
15. Seatback remote folding lever

Infotainment system Select ‘Setup -> Vehicle Settings -> Seat’ from the Settings menu on the infotainment system screen, you may use various convenience functions.

• Seat position change alert: Seat change information is displayed.
• Seat switch alert: Detailed information about the seat switch and image is displayed when the switch is touched or the switch is moved.
• Smart Posture Care: Recommends a posture (position) for the driver according to the driver’s measurement. For more details, refer to the “Smart Posture Care” section in chapter 5. Heated/Ventilated features
  • Auto. Controls That Use Climate Control Settings (for driver’s seat) :
  • The seat temperature is automatically controlled.
  • Seat heater balance: When the seat heater is on, you may lower the seat heater (warmer) setting, or may turn the seat heater off for either the seatback or seat cushion.
• Seating easy access
  • Steering wheel easy access: Moves the steering wheel when the driver enters or leaves the vehicle.
  • Driver seat easy access: The distance (Normal/Extended/Off) the seat automatically moves when the driver enters or leaves the vehicle may be selected.
• Ergo-motion seat
  • Comfortable stretch: The operation intensity and operation time for Comfortable Stretch may be selected.
  • Smart posture assist: The seat is adjusted to assist the driver’s posture after driving for an hour.
  • Smart support: The driver’s seat bolster is increased when SPORT mode is selected or when driving at high speed.

Information The information provided may differ depending on which functions apply to your vehicle.

Safety Precautions

Adjusting the seats so that you are sitting in a safe and comfortable position plays an important role in the safety of the driver and passengers, as much as seat belts and airbags when in an accident.

WARNING
Do not use a cushion that reduces friction between the seat and the passenger. The passenger’s hips may slide under the lap portion of the seat belt during an accident or a sudden stop. Serious or fatal internal injuries could result because the seat belt cannot operate properly.

Airbags
You can take steps to reduce the risk of being injured by an inflating airbag. Sitting too close to an airbag greatly increases the risk of injury in the event the air bag inflates. The National Highway Traffic Safety Administration (NHTSA) recommends that drivers allow at least 10 inches (25 cm) between the centre of the steering wheel and their chest.

WARNING
To reduce the risk of serious injury or death from an inflating airbag, take the following precautions:

• Adjust the driver’s seat as far to the rear as possible maintaining the ability to control the vehicle.
• Adjust the front passenger seat as far to the rear as possible. Hold the steering wheel by the rim with your hands at the 9 o’clock and 3 o’clock positions to minimize the risk of injuries to your hands and arms.
• NEVER place anything or anyone between you and the airbag. Do not allow the front passenger to place feet or legs on the dashboard to minimize the risk of leg injuries.

Seat belts Always fasten your seat belt before starting any trip. At all times, passengers should sit upright and be properly restrained. Infants and small children must be restrained in appropriate Child Restraint Systems. Children who have outgrown a booster seat and adults must be restrained using seat belts.

WARNING
Take the following precautions when adjusting your seat belt:

• NEVER use one seat belt for more than one occupant. Always position the seatback upright with the lap portion of the seat belt snug and low across the hips.
• NEVER allow children or small infants to ride on a passenger’s lap. Do not route the seat belt across your neck, across sharp edges, or reroute the shoulder strap away from your body.
• Do not allow the seat belt to become caught or jammed.

Front Seats

The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.

WARNING
Take the following precautions when adjusting your seat:

• NEVER attempt to adjust the seat while the vehicle is moving. The seat could respond with unexpected movement and may cause loss of vehicle control resulting in an accident.
• Do not place anything under the front seats. Loose objects in the driver’s foot area could interfere with the operation of the foot pedals, causing an accident.
• Do not allow anything to interfere with the normal position and proper locking of the seatback.
• Do not place a cigarette lighter on the floor or seat. When you operate the seat, gas may exit out of the lighter causing a fire.
• Use extreme caution when picking up small objects trapped under the seats or between the seat and the center console. Your hands might be cut or injured by the sharp edges of the seat mechanism.
• If there are occupants in the rear seats, be careful while adjusting the front seat position.
• Make sure that the seat is locked in place after the adjustment. If not, the seat might move unexpectedly resulting in an accident.

CAUTION
To prevent injury:

• Do not adjust your seat while wearing your seat belt. Moving the seat cushion forward may cause strong pressure on your abdomen.
• Do not allow your hands or fingers to get caught in the seat mechanisms while the seat is moving.

WARNING
NEVER allow children in the vehicle unattended. The power seats are operable when the vehicle is turned off.

NOTICE
To prevent damage to the seats:

• Always stop adjusting the seats when the seat has been adjusted as far forward or rearward as possible.
• Do not adjust the seats longer than necessary when the vehicle is turned off. This may result in unnecessary battery drain.
• Do not operate two or more seats at the same time. This may result in an electrical malfunction.

Forward and rearward adjustment

To move the seat forward or rearward:

1. Push the control switch forward or rearward. Release the switch once the seat reaches the desired position.

Seat cushion tilt/height adjustment Seat cushion tilt (1)
To change the angle of the front part of the seat cushion: Push the front portion of the control switch up to raise or down to lower the front part of the seat cushion. Release the switch once the seat reaches the desired position.

Seat cushion height (2) To change the height of the seat cushion: Push the rear portion of the control switch up to raise or down to lower the height of the seat cushion. Release the switch once the seat reaches the desired position.

Seatback angle adjustment To recline the seatback:

1. Push the control switch forward or rearward.
2. Release the switch once the seatback reaches the desired position.

Reclining seatback
Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protection of your restraint system (seat belts and airbags) is greatly reduced by reclining your seatback.

WARNING
NEVER ride with a reclined seatback when the vehicle is moving. Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. Driver and passengers should ALWAYS sit well back in their seats, properly belted, and with the seatbacks upright. Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be twined around the seat belt, causing neck or other injuries. The more the seatback is reclined, the greater the chance the passenger’s hips will slide under the lap belt or the passenger’s neck will strike the shoulder belt.

Seat cushion extension adjustment (for driver’s seat) (if equipped) To move the front part of the cushion forward or rearward

1. Push the control switch forward or rearward.
2. Release the switch once the seat cushion reaches the desired length.

Seat cushion support adjustment (for driver’s seat) (if equipped) To adjust cushion support:

1. Push the control switch up to increase cushion support or down to decrease cushion support.
2. Release the switch once the seat cushion support reaches the desired position.

Lumbar support (if equipped) To adjust the lumbar support:

1. Press the front portion of the switch to increase support or the rear portion of the switch (2) to decrease support.
2. Press switch (3) or (4) to move the support position up or down.
3. Release the switch once the lumbar support reaches the desired position.

Seat bolster adjustment (for driver’s seat) (if equipped) To adjust seat bolster:

1. Push the adjustment lever clockwise, the seatback bolster will be adjusted inward. Push the switch counterclockwise, the seatback bolster will be adjusted outward.
2. Release the lever once the bolster reaches the desired position.

Ergo-motion seat (if equipped) Select ‘Ergo-motion Seat’ from the infotainment system’s Settings menu to select and set up supplemental functions.

WARNING
Before actually using each function, try the functions with the vehicle parked.

• Comfortable stretch Comfortable stretch is a function that helps relieve fatigue of the pelvis and lower back due to driving.
•  

Every time you press the button, you may select a mode or turn off the function in the following order.

• • Pelvic stretching: The cushion portion moves, helping the left and right movement of the pelvis.
  • Lumbar stretching: The seatback portion moves, helping back-and-forth movement of the lower back.
  • Whole Body Stretching: The cushion and seatback moves in sequence, helping the whole body reduce fatigue.
  • Off: Turns off Comfortable Stretch.

Also, you can change the operation intensity and operation time from the Settings menu on the infotainment system screen.

• Intensity: Setup -> Vehicle Settings > Seat -> Ergo-Motion Seat -> Comfortable Stretch -> Strong/Normal Time: Setup -> Vehicle Settings -> Seat > Ergo-Motion Seat -> Comfortable Stretch -> Operational Time -> Short(10 min)/Normal(15 min)/Long(20 min)

Smart posture assist

After driving for an hour, Smart posture assist automatically adjusts the pelvis and back portion of the seat to assist the posture. You can activate or deactivate Smart Posture Assist function from the Settings menu in the infotainment system screen. Select:

• Setup -> Vehicle Settings -> Seat -> Ergo-Motion Seat -> Smart Posture Assist

Smart support
The seat bolster support increases when SPORT mode is selected for Drive Mode and when driving at high speed. You can activate or deactivate the Posture Assist function from the Settings menu in the infotainment system screen. Select:

• Setup -> Vehicle Settings -> Seat -> Ergo-Motion Seat -> Smart Support

Walk-in switch The rear seat passenger may use the switches to control the front passenger seat.

• Sliding forward or rearward: Press the switch (1) or (2) to move the front passenger seat forward or rearward.
•  
• Seatback angle: Press the switch (3) or (4) to recline the front passenger seatback forward or rearward.

Seatback pocket The seatback pocket is provided on the back of the front seatbacks.  

CAUTION
Do not put heavy or sharp objects in the seatback pockets. In an accident, they could come loose from the pocket and injure occupants.

Rear Seats

WARNING Take the following precautions:

• Adjusting the seats
  • NEVER attempt to adjust the seat while the vehicle is moving. The seat may suddenly move and may injure the passenger.
  • Make sure that the seat is locked in place after the adjustment. If not, the seat might move unexpectedly resulting in an accident.
• Folding the seats
  • Do not fold the seatback when the seat is occupied (for example, passenger, pets or luggage). It may injure the passenger or pet, or damage the luggage.
  • Never allow passengers to sit on top of the folded-down seatback while the vehicle is moving. This is not a proper seating position and no seat belts are available for use. This could result in serious injury or death in case of an accident or sudden stop.
  • Objects carried on the folded-down seatback should not extend higher than the top of the front seatback. This could allow cargo to slide forward and cause injury or damage during sudden stops.
  • When returning the rear seatback from a folded to an upright position, hold the seatback and return it slowly. Ensure that the seatback is completely locked into its upright position by pushing on the top of the seatback. In an accident or sudden stop, the unlocked seatback could allow cargo to move forward with great force and enter the passenger compartment, which could result in serious injury or death.
• Loading cargo
  • Make sure the engine is off, the gear is shifted to P (Park), and the parking brake is securely applied whenever loading or unloading cargo. Failure to take these steps may allow the vehicle to move if the shift button or shift dial is inadvertently pressed or rotated to another position.
  • When cargo is loaded through the rear passenger seats, ensure the cargo is properly secured to prevent it from moving while driving.
• Do not place objects in the rear seats, since they cannot be properly secured and may hit vehicle occupants in a collision causing serious injury or death.

CAUTION
Do not allow your hands or fingers to get caught in the seat mechanisms while adjusting the seats.

NOTICE
To prevent damage to the vehicle:

• Rear seat belts
  Before folding the seatback, insert the seat belt buckle in the holder between the seatback and cushion. And insert the seat belt webbing in the guide to prevent the seat belt from being damaged.
•  
• Cargo Be careful when loading cargo through the rear passenger seats to prevent damage to the vehicle interior.

Manual adjustment Seatback angle To recline the seatback:

1. Pull up the seatback recline lever.
2. Hold the lever and adjust the seatback of the seat to the position you desire.
3. Release the lever and make sure the seatback is locked in place. The lever MUST return to its original position for the seatback to lock.

The seatbacks can be folded with the seatback recline lever.

Folding the rear seats

The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. To fold down the rear seatback:

1. Set the front seatback to the upright position and if necessary, slide the front seat forward.
2. Lower the rear head restraints to the lowest position.
3. Route the seat belt webbing through the rear seat belt guides to prevent the belts from being trapped behind or under the seats.
4. Pull up the seatback folding lever, then fold the seat toward the front of the vehicle. When you return the seatback to its upright position, always be sure it has locked into position by pushing on the top of the seatback.
5. To use the rear seat, lift and unfold the seatback to the upright position by pulling up the folding lever. Push the seatback firmly until it clicks into place. Make sure the seatback is locked in place.
6. Return the rear seat belt to the proper position.

Seatback remote folding armrest The armrest is located in the center of the rear seat. Use the strap in the centre of the armrest to pull it down.

Head Restraints

The vehicle’s front and rear seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly, they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear-impact collision.

WARNING
To help reduce the risk of serious injury or death in an accident, take the following precautions when adjusting your head restraints:

Always properly adjust the head restraints for all passengers BEFORE starting the vehicle.
NEVER let anyone ride in a seat with the head restraint removed or reversed.

• Adjust the head restraints so the middle of the head restraint is at the same height as the height of the top of the eyes.
• NEVER adjust the head restraint position of the driver’s seat when the vehicle is in motion.
• Adjust the head restraint as close to the passenger’s head as possible. Do not use a seat cushion that holds the body away from the seatback.
• Make sure the head restraint locks into position after adjusting it.

WARNING When sitting on the rear seat, do not adjust the height of the head restraint to the lowest position.

CAUTION
When there is no occupant in the rear seats, adjust the height of the head restraint to the lowest position. The rear seat head restraint can reduce the visibility of the rear area.

NOTICE
To prevent damage, NEVER hit or pull on the head restraints.

Front seat head restraints The driver’s and front passenger’s seats are equipped with adjustable head restraints for the passenger’s safety and comfort. Adjusting the height up and down

To raise the head restraint:

1. Pull it up to the desired position (1).

To lower the head restraint:

1. Push and hold the release button (2) on the head restraint support.
2. Lower the head restraint to the desired position (3).

NOTICE If you recline the seatback towards the front with the head restraint and seat cushion raised, the head restraint may come in contact with the sunvisor or other parts of the vehicle. Removal/Reinstall To remove the head restraint:

1. Recline the seatback (2) with the seatback angle switch (1).
2.  Raise the head restraint as far as it can go.
3.  Press the head restraint release button (3) while pulling the head restraint up (4).

WARNING
NEVER allow anyone to travel in a seat with the head restraint removed.

Forward and rearward adjustment

The head restraint can be adjusted forward to 3 different positions by pulling the headrest detent forward to the desired position. To adjust the head restraint to its furthest rearwards position, pull it fully forward to the farthest position and release it. To reinstall the head restraint :

1. Recline the seatback.
2. Put the head restraint poles (2) into the holes while pressing the release button (1).
3. Adjust the head restraint to the appropriate height.
4. Recline the seatback (4) with the seatback angle switch (3).

 WARNING Always make sure the head restraint locks into position after reinstalling and adjusting it properly.

Rear seat head restraints The rear seats are equipped with head restraints in all the seating positions for the passenger’s safety and comfort. Adjusting the height up and down
To raise the head restraint:

1. Pull it up to the desired position (1).

To lower the head restraint:

1. Push and hold the release button (2) on the head restraint support.
2. Lower the head restraint to the desired position (3).

Removal/Reinstallation
To remove the head restraint:

1. Raise the head restraint as far as it can go.
    
2. Press the head restraint release button (1) while pulling the head restraint up (2).

To reinstall the head restraint:

1. Put the head restraint poles into the holes (3) while pressing the release button (1).
2. Adjust the head restraint to the appropriate height.

Seat Warmers
Seat warmers are provided to warm the seats during cold weather. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the seat warmers OFF.  

WARNING
The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially if used for long periods of time. Passengers must be able to feel if the seat is becoming too warm so they can turn it off, if needed. People who cannot detect temperature change or pain to the skin should  use extreme caution, especially the following types of passengers:

• Infants, children, elderly or disabled persons, or hospital outpatients. People with sensitive skin or who burn easily. Fatigued individuals. Intoxicated individuals. People taking medication that can cause drowsiness or sleepiness.

WARNING
NEVER place anything on the seat that insulates against heat when the seat warmer is in operation, such as a blanket or seat cushion. This may cause the seat warmer to overheat, causing a burn or damage to the seat.

NOTICE
To prevent damage to the seat warmers and seats:

• Never use a solvent such as paint thinner, benzene, alcohol or gasoline to clean the seats.
• Do not place heavy or sharp objects on seats equipped with seat warmers.
• Do not change the seat cover. It may damage the seat warmer.

Front seat warmers While the engine is running, touch either of the icons to warm the driver’s seat or front passenger’s seat. The seat warmer will operate and the warming light will illuminate to indicate that the function is in use. You can control the temperature by pressing either or icon.

Manual temperature control
Each time you touch the or icon, the temperature setting of the seat is changed as follows :

• Automatic temperature control
  The seat warmer starts to automatically control the seat temperature to prevent low-temperature burns after being manually turned on.

You may manually touch the icon to increase seat temperature. However, the seat temperature is automatically adjusted again.

• Seat Heater Balance You may lower the seat warmer setting, or may turn the seat warmer off for either the seatback or seat cushion, when the seat warmer is on. To use this function, it must be enabled from the Settings menu in the infotainment system screen. Select:
  • Setup -> Vehicle Settings -> Seat -> Heated/Ventilated Features -> Seat Heater Balance
  • When touching the or icon for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn off.
  • The seat warmer defaults to the OFF position whenever the Engine Start/Stop button is pressed to the ON position.

Rear seat warmers (if equipped)

• While the engine is running, press either of the seat warmer switches to warm the rear seat.
• Manual temperature control Each time you press the switch, the temperature setting of the seat is changed as follows :
• 

Automatic temperature control The seat warmer starts to automatically control the seat temperature in order to prevent low temperature burns after being manually turned on. You may manually push the switch to increase seat temperature. However, the seat temperature is automatically adjusted again.

• When pressing the switch for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn off. The seat warmer defaults to the OFF position whenever the Engine Start/Stop button is pressed to the ON position.

• 
• You can also adjust the rear seat warmers from the front seats. With the engine running, touch the seat warmer icon on the infotainment system screen.

Air Ventilation Seats (if equipped)

The air ventilation seats are provided to cool the front seats by blowing air through small vent holes on the surface of the seat cushions and seatbacks. When the operation of the air ventilation seat is not needed, keep the air ventilation seats off.

NOTICE
To prevent damage to the air ventilation seats:

• Never use a solvent such as paint thinner, benzene, alcohol or gasoline to clean the seats.
• Avoid spilling liquids on the surface of the front seats and seatbacks; this may cause the air vent holes to block and not work properly.
• Do not place materials such as plastic bags or newspapers under the seats. They may block the air intake causing malfunction of the air vent.
• Do not change the seat covers. It may damage the air ventilation seat. If the air vents do not operate, restart the vehicle. If there is no change, have your vehicle inspected by an authorized retailer of Genesis Branded products.

Front air ventilation seats

• 
• While the engine is running, push either of the air ventilation seat switch to cool the driver’s seat or the front passenger’s seat.
• Each time you push the switch, the airflow changes as follows:

• If the air ventilation seat is positioned at HIGH, the airflow speed will increase according to vehicle speed.
• Use the air ventilation seat with the air conditioning on for more effective ventilation.
• It may take 3~5 minutes after switch operation to feel the temperature change Auto. Controls That Use Climate .Control Settings (for driver’s seat) The air ventilation seat automatically controls the seat temperature depending on the ambient temperature when the engine is running. To use this function, it must be enabled from the Settings menu in the infotainment system screen. Select:
• When pressing the switch for more than 1.5 seconds with the air ventilation seat operating, the operation will turn off.
• If the vehicle is turned off then on again, the air ventilation seat turns ON or OFF as follows:
  • Driver’s seat The air ventilation seat stays OFF if it was turned off before the vehicle was turned off. The air ventilation seat stays ON (HIGH) if it was turned ON (HIGH/MEDIUM/LOW) before the vehicle was turned off.
  • Passenger’s seat The air ventilation seat stays OFF regardless of the previous state of the air ventilation seat.

Rear air ventilation seats (if equipped)

• While the engine is running, press either of the air ventilation switches to cool the seat. Each time you press the switch, the air flow changes as follows:

• If the air ventilation seat is positioned at HIGH, the airflow speed will increase according to vehicle speed.
• Use the air ventilation seat with the air conditioning on for more effective ventilation.
• It may take 3~5 minutes after switch operation to feel the temperature change.
• When pressing the switch for more than 1.5 seconds with the air ventilation seat operating, the air ventilation seat will turn off.
• The air ventilation seat defaults to the OFF position whenever the Engine Start/Stop button is pressed to the ON position.

SEAT BELTS

This section describes how to use the seat belts properly. It also describes some of the things not to do when using seat belts.

Seat Belt Safety Precautions

Always fasten your seat belt and make sure all passengers have fastened their seat belts before starting any trip. Air bags are designed to supplement the seat belt as an additional safety device, not a replacement. Most countries require all occupants of a vehicle to wear seat belts.

WARNING
Seat belts must be used by ALL passengers whenever the vehicle is moving. Take the following precautions when adjusting and wearing seat belts:

• Children under the age of 13 should be properly restrained in the rear seats.
• NEVER allow children to ride in the front passenger seat, unless the air bag is deactivated. If a child is seated in the front passenger seat, move the seat as far back as possible. And the child must always be restrained in the seat properly.
• NEVER allow an infant or child to be carried on an occupant’s lap. NEVER ride with the seatback reclined when the vehicle is moving. Do not allow children to share a seat or seat belt. Do not wear the shoulder belt under your arm or behind your back.
• NEVER wear a seat belt over fragile  objects. If there is a sudden stop or impact, the seat belt can damage it.
• Do not use the seat belt if it is  twisted. A twisted seat belt will not protect you properly in an accident.
• Do not use a seat belt if the webbing or hardware is damaged. Do not latch the seat belt into the buckles of other seats. NEVER unfasten the seat belt  while driving. This may cause loss of vehicle control resulting in an accident.
• Make sure there is nothing in the buckle interfering with the seat belt latch mechanism, because any materials in the buckle can cause the seat belt not to be fastened securely.
• No modifications or additions should be made by the user which will either prohibit the seat belt adjusting devices from operating to remove slack, or prohibit the seat belt assembly from being adjusted to remove slack.

 WARNING  Damaged seat belts and seat belt assemblies will not operate properly. Always replace:

• Frayed, contaminated, or damaged webbing. Damaged hardware.
• The entire seat belt assembly after it has been worn in an accident, even if damage to webbing or assembly is not apparent.

Seat Belt Warning Light

Driver’s seat belt warning As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time the Engine Start/Stop button is in the ON or START position regardless of belt fastening. If the seat belt is not fastened, when vehicle speed is between 5.5 mph (9 km/h) and 12 mph (20 km/h) the warning light will continue to illuminate and warning chime will sound until the seat belt is fastened. If the seat belt is not fastened, when vehicle speed is above 12 mph (20 km/h), the warning light will blink and warning chime will sound for approximately 100 seconds (warning chime will sound in three stages).

Front passenger’s seat belt warning
As a reminder to the front passenger, the front passenger’s seat belt warning light will illuminate for approximately 6 seconds each time the Engine Start/Stop button is in the ON or START position regardless of belt fastening. If the seat belt is not fastened, when vehicle speed is between 5.5 mph (9 km/h) and 12 mph (20 km/h) the warning light will continue to illuminate and warning chime will sound until the seat belt is fastened. If the seat belt is not fastened, when vehicle speed is above 12 mph (20 km/h), the warning light will blink and warning chime will sound for approximately 100 seconds (warning chime will sound in three stages).  

WARNING
Riding in an improper position adversely affects the front passenger’s seat belt warning system. It is important for the driver to instruct the passenger to seated properly as instructed in this manual.  

Information
Although the front passenger seat is not occupied, the seat belt warning light will blink or illuminate for 6 seconds. The front passenger’s seat belt warning may operate when luggage is placed on the front passenger seat.

Seat Belt Restraint System

WARNING Improperly positioned seat belts may increase the risk of serious injury in an accident. Take the following precautions when adjusting the seat belt:

• Position the lap portion of the seat belt as low as possible across your hips, not on your waist, so that it fits snugly.
• Position one arm under the shoulder belt and the other over the belt, as shown in the illustration.
• Always position the shoulder belt anchor into the locked position at the appropriate height.
• NEVER position the shoulder belt across your neck or face.

Front Seat Belt – Driver’s 3point system with emergency locking retractor To fasten your seat belt:
Pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible “click” when the tab locks into the buckle. You should place the lap belt (1) portion across your hips and the shoulder belt (2) portion across your chest. The seat belt automatically adjusts to the proper length after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and move with you. If there is a sudden stop or impact, the belt will lock into position. It will also lock if you try to lean forward too quickly.

NOTICE
If you are not able to smoothly pull enough of the seat belt out from the retractor, firmly pull the seat belt out and release it. After release, you will be able to pull the belt out smoothly.

Height adjustment
You can adjust the height of the shoulder belt anchor to one of the four different positions for maximum comfort and safety. The shoulder portion should be adjusted so it lies across your chest and midway over your shoulder nearest the door, not over your neck. To release your seat belt:
Press the release button (1) in the locking buckle. Once released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.

Rear Seat Belt – Passenger’s 3-point system with convertible locking retractor

This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. Convertible retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a convertible retractor is also installed in the front passenger seat position, NEVER place any infant/child restraint system in the front seat of the vehicle.

To fasten your seat belt:
Pull the seat belt out of the retractor and insert the metal tab into the buckle. There will be an audible “click” when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver’s seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly across your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). Refer to the “Using a Child Restraint System” section in this chapter. To release your seat belt:
Press the release button (1) in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.

NOTICE Although the seat belt retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, the emergency locking mode allows seated passengers to move freely in their seat while keeping some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body. To deactivate the automatic locking mode, unbuckle the seat belt and allow the belt to fully retract.

Second row center seatbelt (3-point rear center seat belt)

1. Take out the buckle (2), which is stored between the seat/seatback cushions.
2. Insert the metal plate (1) into the buckle (2), until it clicks. You can make sure its secure fastening by pulling the seatbelt webbing. The buckle with ‘CENTER’ mark should be used for the 3-point seatbelt.
3. Restore the buckle between the seat/seatback cushion after unfastening the seatbelt.

Pre-tensioner seat belt [1] : Retractor pre-tensioner seat belt (Driver and front passenger) Your vehicle is equipped with driver’s and front passenger’s Pre-tensioner Seat Belts (Retractor Pre-tensioner). The purpose of the pre-tensioner is to make sure the seat belts fit tightly against the occupant’s body in certain frontal or side collision(s). The pre-tensioner seat belts may be activated in crashes where the frontal or side collision(s) is severe enough, together with the air bags. When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant’s body. If the system senses excessive tension on the driver or passenger’s seat belt when the pre-tensioner system activates, the load limiter inside the retractor pre-tensioner will release some of the pressure on the affected seat belt.

WARNING P
re-tensioner Seat Belts that malfunction may not protect you properly during an accident. Take the following precautions:

• Always wear your seat belt and sit properly in your seat. Do not use the seat belt if it is loose or twisted. A loose or twisted seat belt will not protect you properly in an accident.
• Do not place anything near the buckle. This may adversely affect the buckle and cause it to function improperly.
• Always replace your pre-tensioners after activation or an accident.
• NEVER inspect, service, repair or replace the pre-tensioners by yourself. This must be done by an authorized retailer of Genesis Branded products.
• Do not hit the seat belt assemblies.

WARNING
Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated. When the pre-tensioner seat belt mechanism deploys during a collision, the pre-tensioner can become hot and can burn you.

CAUTION

Body work on the front area of the vehicle may damage the pre-tensioner seat belt system. Therefore, have the system serviced by an authorized retailer of Genesis Branded products. The Pre-Tensioner Seat Belt System consists mainly of the following components. Their locations are shown in the illustration:

1. SRS air bag warning light
2. Retractor pre-tensioner
3. SRS control module

NOTICE
The sensor that activates the SRS control module is connected to the pre–tensioner seat belts. The SRS airbag warning light on the instrument cluster will illuminate for approximately 3~6 seconds after the Engine Start/Stop button is in the ON position, and then it should turn off. If the pre-tensioner is not working properly, the warning light will illuminate even if the SRS airbag is not malfunctioning. If the warning light does not illuminate, stays illuminated or illuminates when the vehicle is being driven, have an authorized retailer of Genesis Branded products inspect the pre-tensioner seat belts and SRS airbags as soon as possible.

Information

• Both the driver’s and front passenger’s pre-tensioner seat belts may be activated in certain frontal or side collisions or rollovers. When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal operating conditions and are not hazardous. Although it is non-toxic, the fine dust may cause skin irritation and should not be inhaled for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre-tensioner seat belts were activated.
• The pre-tensioner seat belt system may get adversely affected by installing an audio system to the centre console or welding/painting the frontal vehicle body. In this case, consult an authorized retailer of Genesis Branded products. The airbag warning light illuminates if there is a malfunction with the pre-tensioner seat belt system. In the following situations, immediately have the airbag system and the pre-tensioner seat belt system checked by an authorized retailer of Genesis Branded products.
  • The airbag warning light does not illuminate at all after turning ON the engine
  • The airbag warning light remains ON for over 3~6 seconds after turning the engine

FAQs

Useful Link

View Full PDF: Genesis GV70 2023 User Manual Auto User Guide

2023 GENESIS GV70 Specs, Price, Features, Mileage (Brochure)

Related Article

2023 GENESIS ELECTRIFIED GV70 Specs, Price, Features, Mileage (Brochure)
2023 GENESIS G90 Specs, Price, Features, Mileage (Brochure)
2023 GENESIS GV60 Specs, Price, Features, Mileage (Brochure)
2023 Genesis G80 Specs, Price, Features, Mileage (Brochure)