Blown Fuse Diagrams: 2024 Genesis G80’s Relay and Fuses
The 2024 Genesis G80 represents the pinnacle of luxury, innovation, and advanced automotive technology. Understanding the fuses and fuse box system is critical for ensuring the proper operation of your vehicle’s various electrical components. Fuses are protective devices that prevent electrical overloads and potential damage to your car’s sensitive electronics. Understanding the basics of your 2024 Genesis G80’s fuses and fuse box allows you to efficiently troubleshoot and resolve minor electrical issues.
2024 Genesis G80 Specs, Price, Features, Mileage and Review
Fuses and Fuse Box
Fuses
- A vehicle’s electrical system is protected from electrical overload damage by fuses.
- This vehicle has 5 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment.
- If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted or broken.
- If the electrical system does not work, first check the driver’s side fuse panel. Before replacing a blown fuse, turn the engine and all switches off, and then disconnect the negative battery cable. Always replace a blown fuse with one of the same rating.
- If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized retailer of Genesis Branded products.
WARNING
NEVER replace a fuse with anything but another fuse of the same rating.
- A higher capacity fuse could cause damage and possibly cause a fire.
- Do not install a wire or aluminum foil instead of the proper fuse – even as a temporary repair. It may cause extensive wiring damage and possibly a fire.
NOTICE
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
Instrument Panel Fuse Replacement
- Turn the vehicle off.
- Turn all other switches off.
- Open the fuse panel cover.
- Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location.
- Pull the suspected fuse straight out. Use the removal tool (1) provided in the engine compartment fuse panel.
- Check the removed fuse; replace it if it is blown. Spare fuses are provided in the instrument panel fuse panels (or in the engine compartment fuse panel).
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized retailer of Genesis Branded products.
In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit you may not need for operating the vehicle, such as the cigarette lighter fuse.
If the headlights or other electrical components do not work and the fuses are undamaged, check the fuse panel in the engine compartment. If a fuse is blown, it must be replaced with the same rating.
Engine Compartment Panel Fuse Replacement
Blade fuse / Cartridge fuse
- Turn the vehicle off.
- Turn all other switches off.
- Remove the fuse panel cover by pressing the tap and pulling up.
- Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the removal tool in the engine compartment fuse panel.
- Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized retailer of Genesis Branded products.
NOTICE
After checking the fuse panel in the engine compartment, securely install the fuse panel cover. You may hear a clicking sound if the cover is securely latched. If it is not securely latched, electrical failure may occur from water contact.
Multi fuse / Midi fuse
If the multi fuse or midi fuse is blown, consult an authorized retailer of Genesis Branded products.
Fuse/Relay Panel Description
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
Instrument panel fuse panel
| Fuse Name | Fuse Rating | Circuit Protected |
| MODULE9 | 10A | Overhead Console, AMP, Smartphone Wireless Charger, Low DC-DC Converter (AUX/AMP), Data Link Connector, Driver/Passenger Power Seat Module, Electro Chromic Mirror, Front/Rear A/C controller, Rear Seat Console Remote Control Switch Switch, A/V & Navigation Head Unit, A/C Control Module, Rear Seat LH/RH Heater Unit |
| SUNROOF | 25A | Sunroof Control Unit (Master/Slave) |
| MODULE11 | 10A | Head Lamp LH, Head Lamp RH, Multifunction Switch, ADAS Unit (Parking) |
| MODULE12 | 10A | IAU, IBU |
| A/C3 | 10A | E/R SUB Junction Block(Blower Relay), Incar Temperature Sensor, A/C Control Module, Front A/C controller, Rear A/C controller |
| A/BAG IND | 10A | Instrument Cluster, Overhead Console |
| E-SHIFTER2 | 10A | Electronic ATM Shift Lever Dial |
| SPARE(IG2) | 15A | Not Used |
| MODULE10 | 10A | ICU Junction Block (ESU) |
| MODULE7 | 10A | Driver Door Module, IBU, Multifunction Switch, IAU, Stop Lamp Switch |
| MULTI MEDIA | 25A | Low DC-DC Converter |
| MODULE13 | 10A | Front/Rear A/C controller, Rain Sensor, Head-Up Display, Security Indicator, A/C Control Module, Rear Occupant Alert (ROA) Sensor, Driver/Passenger Power Outside Mirror, ICU Junction Block(ESU), Hazard Switch |
| CLUSTER | 10A | Instrument Cluster, Head-Up Display |
| IBU2 | 10A | IBU |
| AIR BAG2 | 15A | SRS Control Module, Passenger Occupant Detection Sensor |
| PRESAFETY SEAT BELT3 | 10A | Pre-Active Seat Belt Unit |
| Fuse Name | Fuse Rating | Circuit Protected |
| MODULE8 | 10A | Rear Corner Radar LH/RH, ECS Unit, RWS Module, ADAS Unit (Driving), ADAS Unit (Parking), Crash Pad Switch, Front Console Switch, Steering Tilt & Telescopic Unit, Front View Camera |
| MODULE5 | 10A | PTL Unit, Driver/Passenger Power Seat Module, Driver/Passenger Power Seat Switch, Driver/Passenger Lumbar Support Unit(3/5/7CELL) |
| MODULE3 | 10A | Rear Seat Console Remote Control Switch Switch, Active Air Flap Module, Clock Spring, Steering Tilt & Telescopic Unit, Multifunction Switch |
| P/WINDOW LH | 30A | Driver Power Window Module, Rear Power Window Module LH |
| CURTAIN | 10A | IBU |
| P/SEAT PASS2 | 25A | Passenger Power Seat Module |
| TRUNK | 10A | Trunk Release Relay |
| AIR BAG1 | 15A | SRS Control Module |
| E-SHIFTER1 | 10A | Electronic ATM Shift Lever Dial |
| MODULE4 | 10A | Driver Door Module, Data Link Connector |
| P/SEAT DRV1 | 25A | Driver Power Seat Module |
| P/SEAT | 10A | Driver/Passenger Lumbar Support Unit (3/5/7CELL) |
| POWER HANDLE | 15A | Steering Tilt & Telescopic Unit |
| IBU1 | 10A | IAU, IBU, BLE Unit, Driver Door Outside Handle, Passenger Door Outside Handle |
| POWER OUTLET | 20A | Armrest Power Outlet |
| Fuse Name | Fuse Rating | Circuit Protected |
| P/SEAT DRV2 | 25A | Driver Power Seat Module |
| P/SEAT PASS1 | 25A | Passenger Power Seat Module |
| S/HEATER DRV | 20A | Driver Power Seat Module |
| S/HEATER PASS | 20A | Passenger Power Seat Module |
| DOOR LOCK | 20A | Center Door Lock/Unlock Relay, Driver Door Unlock Relay |
| SPARE(B+) | 10A | Not Used |
| MODULE6 | 10A | Armrest Lamp, IBU, Low DC-DC Converter(AUX/AMP), Electronic ATM Shift Lever Dial, Front Tray Lamp, IAU, |
| BRAKE SWITCH | 10A | Stop Lamp Switch, IBU |
Engine compartment fuse panel (Engine room junction block)
Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing. When you inspect the fuse panel in your vehicle, refer to the fuse panel label.
How to Replace Fuses of Genesis G80
Certainly! Here’s a detailed guide on how to replace fuses in a Genesis G80, along with some helpful tips:
-
Locate the Fuse Box: The fuse box in the Genesis G80 is typically located either under the dashboard on the driver’s side or under the hood near the battery. Look for a black plastic box with a removable lid.
-
Identify the Faulty Fuse: If you’re experiencing an electrical issue, use the fuse diagram located on the inside of the fuse box cover or on the fuse box itself to identify the fuse corresponding to the problematic component.
-
Turn Off the Vehicle: Before you begin replacing the fuse, ensure that the vehicle is completely turned off, and the key is removed from the ignition.
-
Remove the Fuse Box Cover: Depending on the model year of your Genesis G80, you may need to press a release latch or simply lift the cover to access the fuses. Some models may have additional covers within the fuse box itself.
-
Remove the Blown Fuse: Use a fuse puller tool if available, or carefully grip the fuse with your fingers and pull it straight out. Be gentle to avoid damaging the fuse or the fuse box.
-
Inspect the Fuse: Visually inspect the fuse to check if the metal strip inside is broken or melted. If so, the fuse is blown and needs to be replaced.
-
Select the Replacement Fuse: Using an incorrect fuse can lead to electrical problems or damage to your vehicle.
-
Install the New Fuse: Carefully insert the new fuse into the slot previously occupied by the blown fuse. Ensure it fits snugly and is seated properly.
-
Close the Fuse Box Cover: Once the new fuse is installed, securely close the fuse box cover to prevent dust or moisture from entering the fuse box.
-
Test the Component: Turn the ignition to the accessory position (without starting the engine) and test the component associated with the replaced fuse to verify that it’s functioning correctly.
Tips:
- Always carry spare fuses of various amperages in your vehicle for emergencies.
- Handle fuses delicately to avoid damaging them or the fuse box.
- Regularly check your fuses if you notice any electrical issues with your Genesis G80.
FAQs
The 2024 Genesis G80’s fuse box is normally found inside the car or in the engine compartment.
To reach the fuse box, either lift the hood to access the engine compartment fuse box or look in the footwells on the driver’s or passenger’s side to locate the interior fuse box.
The various colors of fuses signify the various amperage ratings. To determine the color code, see the fuse box lid or your owner’s handbook.
A blown fuse frequently exhibits an internal cloudiness or a visible break in the metal filament. To find a blown fuse, use a fuse tester or make a visual inspection.
We don’t advise doing it. Fuse replacements should always be made with the same amperage rating to avoid electrical damage and fire risks.
Yes, the fuse box typically has extra fuses. In the event that a fuse blows, keep the spares on hand.
To remove a blown fuse, use a fuse puller or needle-nose pliers. Fuse pullers are also integrated into some fuse boxes.
For a diagram showing the functions of each fuse and the components that go with it, see the fuse box cover or your owner’s handbook.
When replacing a blown fuse, it’s advised to utilize the same brand and kind of fuse. Different brands may have different requirements.
If a fuse blows frequently, there might be an underlying electrical problem.
Before changing a fuse, turn off the ignition and unplug the related electrical component.
You can usually change a fuse without unplugging the battery. Turning off the ignition and cutting the power to the relevant component is a smart idea, though.
To prevent further damage, it’s advisable to obtain help from a qualified Genesis expert if you are unable to diagnose the problem.
Making changes to your car’s electrical system could void the warranty and put you and your family in danger. In the event that you require more circuits, seek professional advice.
Useful Links
View Full PDF: 2024 Genesis G80 Owner’s Manual| Auto User Guide