Dashboard Guide: 2024 Genesis GV60 Instrument Cluster

INSTRUMENT CLUSTER

The actual cluster in the vehicle may differ from the illustration. For more information, refer to “Gauges and meters” section in this chapter.

1. Speedometer
2. Power/Charge gauge
3. Distance to empty
4. Warning indicator light
5. LCD display
6. Battery SOC (State of Charge) gauge
7. Smart recuperation system

Information
COMFORT/ECO/SPORT mode by pressing the drive mode button will change the main theme of the cluster

Instrument Cluster Control

Instrument panel illumination  (if equipped)
When the vehicle’s position lights or headlights are on, press the illumination control switch to adjust the brightness of the instrument panel illumination. When pressing the illumination control switch, the interior switch illumination intensity is also adjusted.

WARNING
Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or vehicle damage.

• The brightness of the instrument panel illumination is displayed.
• If the brightness reaches to the maximum or minimum level, a chime will sound.

Gauges and Meters Speedometer

The speedometer indicates the speed of the vehicle and the speed is expressed in miles per hour (MPH) or kilometers per hour (km/h).

Power/charge gauge

The Power/Charge Gauge shows the energy consumption and recovery status of the electric motor.

• POWER
  It shows the discharging status of the electric motor when the vehicle is accelerating or driving on an uphill road. The more electric energy is discharged (used), the higher the gauge level.
• CHARGE:
  It shows the charging status of the electric motor when the vehicle is decelerating or driving on a downhill road (being charged by the regenerative brakes). The more electric energy is charged, the higher the gauge level.

State of charge (SOC) gauge for high voltage battery

• The SOC gauge shows the charging status of the high-voltage battery.
• A low percentage number on the indicator would indicate there is not enough energy in the high-voltage battery. 100% indicates that the driving battery is fully charged.
• When driving on highways or motorways, make sure to check in advance if the driving battery is charged enough.

1. When the remaining battery is lower than 10 % on the SOC gauge, the warning light ( ) turns ON to alert you of the battery level.

 When the warning light ( ) turns ON, the vehicle can drive an additional 18 ~ 26 miles (30 ~ 50 km) depending on the driving speed, heater/air conditioner, weather, driving style, and other factors. Charging is required.

NOTICE
When the high voltage battery level is low, the power down indicator light illuminates and the vehicle power is limited. Charge the battery immediately since your vehicle may not be driven, or may roll back on a slope with the indicator light ON.

Outside temperature gauge

• Gauge accuracy for outside air temperature is (1°F).

Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) You can change the temperature unit from the Settings menu in the infotainment system screen.

Select General Settings → Unit → Temperature Unit → °F/°C For detailed information, refer to the separately supplied infotainment system manual. Both the temperature unit on the cluster LCD display and the climate control screen will change.

Odometer

The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed. For more details, refer to the “Scheduled Maintenance Services” section in chapter 9.

Distance to empty

• The distance to empty is the estimated distance the vehicle can be driven with the remaining electric energy.
• The distance to empty varies depending on which drive mode is selected among ECO/COMFORT/SPORT modes.

For more detailed information, refer to ‘Distance to empty’ in Chapter 1.

Information

• If the vehicle is not on level ground or the battery power has been interrupted, the distance to the empty function may not operate correctly.
• The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
• The distance to empty may vary significantly based on driving conditions, driving habits, ambient temperature, weather, varying terrain and the condition of the vehicle.

Energy economy

The average energy consumption (1) and instant energy consumption (2) are displayed at the bottom of the cluster.

Automatic reset
To automatically reset the average energy consumption, select “After Ignition” or “After Recharging” from the Settings menu in the infotainment system screen.

Reduction gear shift indicator

The indicator displays which gear is selected.

Regenerative braking level indicator

The regenerative brake indicates the level of the regenerative braking that you set. It also indicates the Smart regenerative system’s operation status. For more details, refer to “Regenerative Braking System” in Chapter 6.