Genesis G70 2020 Door Locks and Sunroof User Manual

Introduction

A luxury sedan with a variety of cutting-edge innovations to improve comfort, convenience, and safety is the Genesis G70 2020. The door locks and sunroof stand out as two features that enhance the whole experience. The Genesis G70 2020’s door locks offer a high level of security and convenience. You can unlock or lock the doors using the keyless entry technology without actually entering the key. Simply walk up to the car while carrying the key fob in your pocket or purse, and the automobile will recognize your presence. This saves you time and effort and makes it simple to access the car. The Genesis G70 2020 also features a smart key system that enables key fob-based remote door locking and unlocking. When you need to secure the vehicle from a distance, such as when you’re carrying groceries or have your hands full, this feature is extremely helpful. Additionally, you can start the engine with the touch of a button thanks to the smart key system, which does away with the necessity for conventional keys.

Now let’s talk about the sunroof. The Genesis G70 2020 offers a panoramic sunroof option that makes the inside feel spacious and open. The large glass panel covers the entire roof, enabling natural light to stream in and giving both the front and back occupants a sense of space. You have the choice of opening the sunroof partially or completely, allowing you the freedom to customize the quantity of outside air and sunlight that enters the car to your tastes.
In conclusion, the Genesis G70 2020’s door locks and sunroof are perfect examples of the car’s dedication to elegance and ease. The sophisticated keyless entry system and smart key features make getting into and locking the car simple, and the panoramic sunroof improves the driving experience by creating a light, airy interior.

DOOR LOCKS

Operating Door Locks from Outside the Vehicle

Mechanical key

To remove the cover:

1. Pull out the door handle.
2. Press the lock located at the bottom of the cover with a key or flat-head screwdriver (1).
3. Push out the cover (2) while pressing the lock.

notice
Be careful not to damage the cover while removing it or misplace it after removing it.

After removing the cover, turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock (3).
If you lock the driver’s door with a mechanical key, the driver’s door will lock. If you unlock the driver’s door with a mechanical key, the driver’s door will unlock.
Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.

Smart key

To lock the doors, press the button on the outside door handle while carrying the smart key with you or press the door lock button (1) a on the smart key.

Press the button on the driver’s outside door handle while carrying the smart key with you or press the unlock button (2) on the smart key, the driver’s door will unlock. If you press the button on the front passenger’s outside door, all doors will unlock. Once the doors are unlocked, they may be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.

Information

1. In cold and wet climates, door locks and door mechanisms may not work properly due to freezing conditions.
2. If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operat-ing temporarily in order to protect the circuit and prevent damage to system components.

Operating Door Locks from Inside the Vehicle
With the door lock button

1. To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark (2) on the door lock button will be visible.
2. To lock a door, push the door lock button (1) to the “Lock” position. If the door is locked properly, the red mark (2) on the door lock button will not be visible.
3. To open a door, pull the door handle (3) outward.
4. If the inner door handle of either the driver door or passenger door is pulled when the door lock button is in the lock position, the button is unlocked and the door will open.
5. The doors cannot be locked if the smart key is inside the vehicle and any of the doors are open.

Information
If a power door lock ever fails to function while you are in the vehicle try one or more of the following techniques to exit:

1. Operate the door unlock feature repeatedly (both electronic and manual) while simultaneously pulling on the door handle.
2. Operate the other door locks and handles, front and rear.
3. Lower a front window and use the mechanical key to unlock the door from outside.

Information
When the vehicle’s battery run out and you leave the vehicle, make sure all the doors are locked. You can lock the driver’s door with a key and the rest of the doors with the lock button above the door inside handle.

With the central door lock switch

When pressing the () switch (1), all vehicle doors will lock.
When pressing the () switch (2), all vehicle doors will unlock.
If the smart key is in the vehicle and any door is opened, the doors will not lock even though the lock button (1) of the central door lock switch is pressed.

WARNING

1. The doors should always be fully closed and locked while the vehicle is in motion. If the doors are unlocked, the risk of being thrown from the vehicle in a crash is increased.
2. Do not pull the inner door handle of the driver’s or passenger’s door while the vehicle is moving.

WARNING
Do not leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to unattended children or animals who cannot escape the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle.

Always secure your vehicle. Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle.
To secure your vehicle, while depressing the brake pedal, shift the vehicle to P (Park, for auto-matic transmission) or neutral (for manual transmission), apply the parking brake, and press the Engine Start/Stop button to the OFF position, close all windows, lock all doors, and always take the Smart Key with you.

If you stay in the vehicle for a long time while the weather is very hot or cold, there are risks of injuries or danger to life. Do not lock the vehicle from the outside when someone is in the vehicle.
Opening a door when something is approaching may cause dam-age or injury. Be careful when opening doors and watch for vehicles, motorcycles, bicycles or pedestrians approaching the vehicle in the path of the door.

Automatic Door Lock and Unlock Features
Your vehicle is equipped with fea-tures that will automatically lock or unlock your vehicle based on set-tings you select in the LCD cluster display.

Auto LOCK – Enable on Speed
When this feature is set in the LCD cluster display, all the doors will be locked automatically when the vehi-cle exceeds 9 mph (15 km/h).

Auto LOCK – Enable on Shift (Automatic transmission vehicle)
When this feature is set in the LCD cluster display, all the doors will be locked automatically when the vehi-cle is shifted out of P (Park) while the engine is running.

Auto UNLOCK – Enable on Shift (Automatic transmission vehicle)
When this feature is set in the LCD cluster display, all the doors will be unlocked automatically when the vehicle is shifted back into P (Park).
For more information on these features, refer to the LCD Display section later in this chapter.

Additional Unlock Safety Feature – Air Bag Deployment
As an additional safety feature, all doors will be automatically unlocked when an impact causes the air bags to deploy.

Child-protector Rear Door Locks

The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors.The rear door safety locks should be used whenever children are in the vehicle.
The child safety lock is located on the edge of each rear door. When the child safety lock is in the lock (1) position, the rear door will not open if the inner door handle (2) is pulled. To lock the child safety lock, insert a small flat blade tool (like a screwdriver or similar) into the slot and turn it to the lock position as shown. To allow a rear door to be opened from inside the vehicle, unlock the child safety lock.

WARNING
If children accidentally open the rear doors while the vehicle is in motion, they could fall out of the vehicle. The rear door safety locks should always be used whenever children are in the vehicle.

THEFT-ALARM SYSTEM

This system helps to protect your vehicle and valuables. The horn will sound and the hazard warning lights will blink continuously if any of the following occurs:

1. A door is opened without using the smart key.
2. The trunk is opened without using the smart key.
3. The engine hood is opened.
   The alarm continues for 30 seconds (repeats 2 times unless the system is disarmed), then the system resets. To turn off the alarm, unlock the doors with the smart key.
   The Theft Alarm System automatically sets 30 seconds after you lock the doors and the trunk. For the system to activate, you must lock the doors and the trunk from outside the vehicle with the smart key or by pressing the button on the outside of the door handles with the smart key in your possession. The hazard warning lights will blink and the chime will sound once to indicate the system is armed.

Once the security system is set, opening any door, trunk, or hood without using the smart key will cause the alarm to activate. The Theft Alarm System will not be set if the hood, the trunk, or any door is not fully closed. If the system will not set, check the hood, the trunk, or the doors are fully closed. Do not attempt to alter this system or add other devices to it.

Information

1. Do not lock the doors until all passengers have left the vehicle. If the remaining passenger leaves the vehicle when the system is armed, the alarm will be activated.
2. If the vehicle is not disarmed with the smart key, open the doors by using the mechanical key and start the engine.
3. When the system is disarmed but a door or trunk is not opened within 30 seconds, the system will be rearmed.

DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)

The Driver Position Memory System is provided to store and recall the following memory settings with a simple button operation.

1. Driver’s seat position
2. Side view mirror position
3. Steering wheel (electric type) position
4. Instrument panel illumination intensity
5. Head-Up Display (HUD) position and brightness (if equipped)

WARNING
Never attempt to operate the driver position memory system while the vehicle is moving.
This could result in loss of control, and an accident causing death, serious injury, or property damage.

Information

1. If the battery is disconnected, the memory settings will be erased.
2. If the Driver Position Memory System does not operate normally, have the system checked by an authorized retailer of Genesis Branded products.

Storing Positions in Memory

1. Check that the gear is in P (Park) while the Engine Start/Stop button is in the ON position.
2. Adjust the driver’s seat position, side view mirror position, steering wheel position, instrument panel illumination intensity, and head-up display height/brightness to positions comfortable for the driver.
3. Press the SET button. The system will beep once and notify you “Press the button to save settings” on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has been successfully stored.
5. “Driver 1 (or 2) settings saved” will appear on the cluster LCD display.

Recalling Positions from Memory

1. Check that the gear is in P (Park) while the Engine Start/Stop button is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, and then the driver’s seat position, side view mirror position, steering wheel position, instrument panel illumination intensity, and head-up display height/brightness will automatically adjust to the stored positions.
3. “Driver 1 (or 2) settings applied” will appear on the cluster LCD display.

Information

1. While recalling the “1” memory position, pressing the SET or 1 but-ton temporarily stops the adjust-ment of the recalled memory posi-tion. Pressing the 2 button recalls the “2” memory position.
2. While recalling the “2” memory position, pressing the SET or 2 but-ton temporarily stops the adjust-ment of the recalled memory posi-tion. Pressing the 1 button recalls the “1” memory position.
3. While recalling the stored positions, pressing one of the control buttons for the driver’s seat, side view mir-ror, steering wheel, instrument panel illumination or head-up dis-play will cause the movement of that component to stop and move in the direction that the control button is pressed.

Resetting the Driver’s Seat Memory System
Take the following procedures to reset the driver’s seat memory system, when it does not operate properly.

To reset the driver’s seat memory system

1. Press the Engine Start/Stop button to the ON position, set the gear in P (Park), and open the dri-ver’s door.
2. Operate the control switch to set the driver’s seat and seatback to the foremost position.
3. Simultaneously press the SET button and push forward the seat movement switch over 2 seconds.

While resetting the driver’s seat memory system

1. It starts with the notification sound.
2. The driver’s seat and seatback is adjusted to the rearward position with the notification sound.
3. The driver’s seat and seatback is re-adjusted to the default position (central position) with the notifica-tion sound.

However, in the following cases, the resetting procedure and the notifica-tion sound may stop.

1. The memory button is pressed.
2. The control switch is operated.
3. The gear is shifted out of P (Park).
4. The driving speed exceeds 2 mph (3 km/h).
5. The driver’s door is closed.

NOTICE

1. Reattempt to do the resetting procedure again, when the reset-ting procedure incompletely stops or the notification sound do not stop.
2. Make sure that there is no obsta-cle around the driver’s seat in advance of resetting the driver’s seat memory system.

Easy Access Function
The system will move the driver’s seat and steering wheel automatical-ly as follows:

1. Exiting the vehicle:
   The driver’s seat will move rear-ward and the steering wheel will move upward when the driver’s door is opened and the Engine Start/Stop button is in the OFF positon with the gear in P (Park). However, the driver’s seat may not move rearward if there is not enough space between the driver’s seat and the rear seats. Also, on a regular basis, the steer-ing wheel will also move forward to adjust its location by itself.
2. Entering the vehicle:
   The driver’s seat and steering wheel will move back to its original position when the Engine Start/Stop button is in the OFF position and the driver’s door is closed with the smart key in possession or when the Engine Start/Stop button is changed to the ACC, ON or START position from the OFF posi-tion.
3. When you enter or exit the vehicle, the seat bolster is automatically adjusted (if equipped).
   1. When you enter, the seat bolter is adjusted to the position set by the driver.
   2. When you exit, the seat bolster is adjusted to the default position.
      You can activate or deactivate the Easy Access Function from the User Settings mode in the cluster LCD dis-play.
   3. Seat Easy Access: ‘Convenience → Seat Easy Access → Off/Normal/Extended’.
   4. Steering Easy Access: ‘Convenience → Steering Easy Access → On/Off’.

For more details, refer to “LCD Display” in this chapter.

CAUTION
Driver should be cautious when using this function to assure no injury to passenger or child on the back seat. In case of emergency the driver has to stop the movement of front seat (when easy access feature is activat-ed) by pressing SET button or any of the driver seat control switches.

STEERING WHEEL

Electric Power Steering (EPS)
The system assists you with steering the vehicle. If the engine is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort.
Should you notice any change in the effort required to steer during normal vehicle operation, have the system checked by an authorized retailer of Genesis Branded products.

NOTICE
If the Electric Power Steering System does not operate normally, the warning light ( ) will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering efforts. Take your vehicle to an authorized retailer of Genesis Branded products and have the system checked as soon as possible.

Information
The following symptoms may occur during normal vehicle operation:

1. The steering effort may be high immediately after pressing the Engine Start/Stop button to the ON position.
   This happens as the system per-forms the EPS system diagnostics. When the diagnostics is completed, the steering wheel effort will return to its normal condition.
2. A click noise may be heard from the EPS relay after the Engine Start/Stop button is in the ON or OFF position.
3. Motor noise may be heard when the vehicle is at stop or at a low driving speed.
4. When you operate the steering wheel in low temperature, abnormal noise may occur. If temperature rises, the noise will disappear. This is a normal condition.
5. When an error is detected from the EPS, the steering effort assist func-tion will not be activated in order to prevent fatal accidents. Instrument cluster warning lights may be on or the steering effort may be high. If these symptoms occur, drive the vehicle to a safe area as soon as it is safe to do so. Have the system checked by an authorized retailer of Genesis Branded products as soon as possible.

Tilt Steering/Telescope Steering
When adjusting the steering wheel to a comfortable position, adjust the steering wheel so that it points toward your chest, not toward your face. Make sure you can see the instrument panel warning lights and gauges. After adjusting, push the steering wheel both up and down to be certain it is locked in position. Always adjust the position of the steering wheel before driving.

WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.

Manual type

To adjust the steering wheel angle and height:

1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3).
3. Pull up the lock-release lever to lock the steering wheel in place.

Information
Sometimes the lock release lever may not engage completely. This may occur when the gears of the locking mechanism do not completely mesh. If this occurs, pull down on the lock-release lever, readjust the steering wheel again, and then pull back up on the release lever to lock the steering wheel in place.

Electric type

To adjust the steering wheel angle and height:

1. Move the switch (1) up and down to adjust the angle (2).
2. Move the switch forward or rear-ward to adjust the height (3).

NOTICE
Do not adjust the steering wheel longer than necessary when the engine is turned off. This may result in unnecessary battery drain.

Heated Steering Wheel (if equipped)

When the Engine Start/Stop button is in the ON position, press the heated steering wheel switch to warm the steering wheel.

1. Each time you push the switch, the temperature setting changes as follows:
   
2. When the heated steering wheel switch is pressed to high ( ): The heated steering wheel switch automatically changes to the low position after 30 minutes. You can turn off the heated steering wheel by pressing the switch to the OFF position.

NOTICE
Do not install any cover or accessory on the steering wheel. This cover or accessory could cause damage to the heated steering wheel system.

Horn

To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.

NOTICE
Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.

MIRRORS

Inside Rearview Mirror
Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered.

WARNING
Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear headrests which could interfere with your vision through the rear window.

To prevent serious injury during an accident or deployment of the airbag, do not modify the rearview mirror and do not install a wide mirror.
NEVER adjust the mirror while driving. This may cause loss of vehicle control resulting in an accident.

NOTICE
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as this may cause the liquid cleaner to enter the mirror housing.

Electric Chromic Mirror (ECM) (if equipped)
Some vehicles come equipped with an electrochromic mirror that helps control glare while driving at night or under low light driving conditions.
When the engine is running, the glare is automatically controlled by the sensor mounted in the rearview mirror. The sensor detects the light level around the vehicle, and auto-matically adjusts to control the head-lamp glare from vehicles behind you. Whenever the shift lever is placed in R (Reverse), the mirror will automat-ically go to the brightest setting in order to improve the driver’s view behind the vehicle.

NOTICE
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing.

Electrochromic mirror (ECM) with HomeLink® system and Genesis Connected Service (if equipped)

[A] : Telemetics buttons,
[B] : HomeLink buttons,
[C] : HomeLink indicator

Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with an Integrated HomeLink® Wireless Control System.
During nighttime driving, this feature will automatically detect and reduce rearview mirror glare. The HomeLink® Universal Transceiver allows you to activate your garage door(s), electric gate, home lighting, etc.

1. HomeLink Channel 1
2. HomeLink Channel 2
3. HomeLink Channel 3
4. Garage Door Opener Status Indicator : Closing or Closed
5. HomeLink Operation Indicator
6. Garage Door Opener Status Indicator : Opening or Opened
7. HomeLink User Interface Indicator

Automatic-Dimming Night Vision Safety™ (NVS®) Mirror (if equipped)
The NVS® Mirror automatically reduces glare by monitoring light levels in the front and the rear of the vehicle. Any object that obstructs either light sensor will degrade the automatic dimming control feature.
For more information regarding NVS® mirrors and other applications, please refer to the Gentex website: www.gentex.com
Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The mirror defaults to the ON position each time the vehicle is started.

Integrated HomeLink® Wireless Control System
The HomeLink® Wireless Control System can replace up to three hand-held radio-frequency (RF) transmitters with a single built-in device. This innovative feature will learn the radio frequency codes of most current transmitters to operate devices such as gate operators, garage door openers, entry door locks, security systems, even home lighting. Both standard and rolling code-equipped transmitters can be programmed by following the outlined procedures.

Additional HomeLink® information can be found at: www.homelink.com, www.youtube.com/HomeLinkGentex or by calling 1-800-355-3515.
Retain the original transmitter of the RF device you are programming for use in other vehicles as well as for future HomeLink® programming. It is also suggested that upon the sale of the vehicle, the programmed HomeLink® buttons be erased for security purposes.

WARNING
Before programming HomeLink® to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. Do not use the HomeLink® with any garage door opener that lacks the safety stop and reverse features required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object – signaling the door to stop and reverse – does not meet current U.S. federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death.

Programming HomeLink®
Please note the following:

1. When programming a garage door opener, it is advised to park the vehicle outside of the garage.
2. It is recommended that a new bat-tery be placed in the hand-held transmitter of the device being pro-grammed to HomeLink® for quicker training and accurate transmission of the radio-frequency signal.
3. Some vehicles may require the Engine Start/Stop button to be in the ACC (or “Accessories”) posi-tion for programming and/or opera-tion of HomeLink®.
4. In the event that there are still pro-gramming difficulties or questions after following the programming steps listed below, contact HomeLink® at: www.homelink.com, www.youtube.com/HomeLinkGent ex or by calling 1-800-355-3515.

Programming
To program most devices, follow these instructions:

1. Press and release (1), (2) or (3) button.
   1. If the indicator (4) is turned ON in Orange, go to Step 3) since it is a new programming.
   2. If the indicator (4) is continuous-ly turned ON or flashes in Green rapidly several times, go to Step 2) since it is a programmed but-ton.
2. Press and hold the button you wish to program for approximately 15- 25 seconds until the LED flash-es in Orange for several times.
3. Hold the Garage Door Opener Original Transmitter (OT) near the HomeLink Mirror.
   
4. Press the Original Transmitter (OT) button until indicator (4) is turned continuously ON or flashes in Green for approximately 10 seconds and it indicates the programming is completed.

Information

1. Some garage door openers require to press the programmed button on the mirror up to three times right after the programming is just completed to operate the garage door.
2. Indicator (4) is turned ON in Orange and flashes for about 60 seconds, during the programming mode and if programming is not succeed-ed within 60 seconds, the programming mode will be abort.

HomeLink® should now activate your rolling code-equipped device.
Gate operator & Canadian program-ming
During programming, your handheld transmitter may automatically stop transmitting. Continue to press the Integrated HomeLink® Wireless Control System button while you press and re-press (“cycle”) your handheld transmitter every two seconds until the frequency signal has been learned. The indicator light will flash slowly and then rapidly after several seconds upon successful training.

Operating HomeLink®

1. Press and release one of the HomeLink buttons (1, 2 or 3) that programed.
2. The HomeLink indicator (4) will operate as below:
   1. Indicates Green and is continu-ously ON (Fixed Code Garage Door Opener)
   2. Flashes in Green rapidly (Rolling Code Garage Door Opener)

Erasing HomeLink® buttons

1. Press and hold the button (1) and (3) simultaneously.
2. The indicator (4) is turned contin-uously ON in orange for about 10 seconds.
3. Then the indicator (4) color changes to Green and flashes rapidly.
   Release the buttons once the green indicator flashes.
4. Now HomeLink button (1), (2) and (4) memories are all cleared.

NVS® is a registered trademark and Z-Nav™ is a trademark of the Gentex Corporation, Zeeland, Michigan. HomeLink® is a registered trademark owned by Johnson Controls, Incorporated, Milwaukee, Wisconsin.

FCC ID: NZLUAHL5A
IC: 4112A-UAHL5A

Information
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following three conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. The transceiver has been tested and complies with FCC and Industry Canada rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

Two-Way Communication Programming

1. Complete the HomeLink  “Programming” first.
2. Before the first 10 times the HomeLink button is pressed after the programming, the following steps MUST occur to program two-way communication. (only for some older garage doors)
   
3. Press and release the programmed HomeLink button to activate the garage door.
4. Once the garage door is stopped, press and release the “Learn” or “Smart” button on the Garage door opener within 1 minute from the time of pressing the programmed HomeLink button on the mirror.
   
5. If both indicators (4) and (6) are flashing rapidly for about 5 seconds, the two-way synchronization is completed.

Information
Some newer garage door openers provide two-way communication synchronizing when programming the original transmitter (OT).

Operating Two Way Communication

1. Press and release (1), (2) or (3) button.
2. Indicators (4) and (6) operate as below:
   1. If the indicator (4) flashes in Orange, it indicates that the garage door is “closing”.
   2. If indicator (4) is ON continuously in Green, it indicates that the garage door is “closed”.
   3. If indicator (6) flashes in Orange, it indicates that the garage door is “Opening”.
   4. If indicator (6) is ON continuously in Green, it indicates that the garage door is “Opened”.
   5. If indicator (4) or (6) does not turn to Green, it indicates that the last status of the garage door was not received properly. The HomeLink mirror tries to receive the last known status of the garage door for a few seconds.

Recalling Garage Door Status
Homelink mirror with two-way communication provides a way to view the last stored message from the garage door opener. In order to recall the last known status of the last acti-vated device, press the buttons “1 and 2” OR “2 and 3” simultaneously.

1. If indicator (4) is ON continuously in Green, it indicates that the last activated device was “closed” properly.
2. If indicator (6) is ON continuously in Green, it indicates that the last activated device was “open” properly.

Information
Two-way communication range distance between “vehicle” and “garage door opener” is approximately 328 feet (100 m).
The range may be reduced or increased a little due to obstacle conditions around the garage door opener, such as houses or trees.

Side View Mirrors

Make sure to adjust the side view mirrors to your desired position before you begin driving.
Your vehicle is equipped with both left-hand and right-hand side view mirrors. The mirrors can be adjusted remotely with the remote switch. The side view mirrors can be folded to prevent damage when going through an automatic car wash or when passing through a narrow street. The right-side view mirror is convex. Objects seen in the mirror are closer than they appear. Use the inside rear view mirror or look back directly to determine the actual distance of other vehicles prior to changing lanes.

WARNING
Do not adjust or fold the side view mirrors while driving. This may cause loss of vehicle control resulting in an accident.

NOTICE

1. Do not scrape ice off the mirror face; this may damage the surface of the glass.
2. If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved spray de-icer (not radiator antifreeze) spray, or a sponge or soft cloth with very warm water, or move the vehicle to a warm place and allow the ice to melt.

Adjusting the side-view mirrors

1. Move the lever (1) either to the L (left side) or R (right side) to select the side view mirror you would like to adjust.
2. Use the mirror adjustment control (2) to position the selected mirror up, down, left, or right.
3. After adjustment, move the lever (1) to the middle to prevent inadvertent adjustment.

NOTICE

1. The mirrors stop moving when they reach the maximum adjusting angles, but the motor continues to operate while the switch is pressed. Do not press the switch longer than necessary, because this can damage the motor.
2. Do not attempt to adjust the side view mirror by hand, because this can damage the motor.

Folding/Unfolding the side view mirror

Manual type
To fold the side view mirrors, grasp the housing of the mirror and then fold it inwards.

Electric type
The outside rearview mirror can be folded or unfolded by pressing the switch.

1. If ‘Convenience → Welcome mirror/light → On door unlock’ is selected in the User Settings mode in the cluster LCD display, the outside mir-ror will fold or unfold automatically as follows:
   1. The mirror will fold or unfold when the door is locked or unlocked by the smart key.
   2. The mirror will fold or unfold when the door is locked or unlocked by the button on the outside door handle.
2. If ‘Convenience → Welcome mirror/light → On door unlock’ and ‘Convenience → Welcome mirror/light → On driver approach’ is selected in the User Settings mode in the cluster LCD display, the out-side mirror will unfold automatically when you approach the vehicle (all doors closed and locked) with a smart key in possession.

NOTICE
The electric-type side view mirror operates even though the Engine Start/Stop button is in the OFF position. However, to prevent unnecessary battery discharge, do not adjust the mirrors longer than necessary while the engine is not running. Do not fold the electric-type side view mirror by hand. It could cause motor failure.

Reverse Parking Aid Function (if equipped)

When you move the shift lever to the R (Reverse) position, the side view mirror(s) will rotate downwards to aid with driving in reverse. The position of the side view mirror switch (1) determines whether or not the mirrors will move:

Left/Right: When either the L (Left) or R (Right) switch is selected, both side view mirrors will move.
Neutral: When neither switch is selected, the side view mirrors will not move.

The side view mirrors will automatically revert to their original positions if any of the following occur:

1. The Engine Start/Stop button is pressed to either the OFF position or the ACC position.
2. The shift lever is moved to any position except R (Reverse).
3. The remote control side view mirror switch is not selected.

WINDOWS

1. Driver’s door power window switch
2. Front passenger’s door power window switch
3. Rear door (left) power window switch
4. Rear door (right) power window switch
5. Window opening and closing
6. Automatic power window
7. Power window lock switch

Power Windows
The Engine Start/Stop button must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control that door’s window. The driver has a Power Window Lock switch which can block the operation of rear passenger windows. The power windows will operate for approximately 30 seconds after the Engine Start/Stop button is placed in the ACC or OFF position. However, if the front doors are opened, the Power Windows cannot be operated even within the 30-second period.

WARNING
To avoid serious injury or death, do not extend your head, arms or body outside the windows while driving.

Information

1. In cold and wet climates, power win-dows may not work properly due to freezing conditions.
2. While driving with the rear windows down or with the sunroof (if equipped) opened (or partially opened), your vehicle may demon-strate a wind buffeting or pulsation noise. This noise is normal and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately one inch. If you experience the noise with the sunroof open, slightly close the sunroof.

Window opening and closing

To open:
Press the window switch down to the first detent position (5). Release the switch when you want the window to stop.
To close:
Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop.

Auto up/down window
Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch.

To reset the power windows
If the power windows do not operate normally, the automatic power window system must be reset as follows:

1. Place the Engine Start/Stop button to the ON position.
2. Close the window and continue pulling up on the power window switch for at least one second.

If the power windows do not operate properly after resetting, have the system checked by an authorized retailer of Genesis Branded prod-ucts.

WARNING
The automatic reverse feature doesn’t activate while resetting the power window system.
Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.

Automatic reverse

If a window senses any obstacle while it is closing automatically, it will stop and lower approximately 12 inches (30 cm) to allow the object to be cleared.
If the window detects the resistance while the power window switch is pulled up continuously, the window will stop upward movement then lower approximately 1 inch (2.5 cm).
If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse will not operate.

Information
The automatic reverse feature is only active when the “Auto Up” feature is used by fully pulling up the switch to the second detent.

WARNING
Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.
Objects less than 0.16 inch (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window will not stop and reverse direction.

Information
Do not install any accessories on the windows. The automatic reverse feature may not operate.

Power window lock switch

The driver can disable the power window switches on the rear passenger doors by pressing the power win-dow lock switch. The indicator will be illuminated.
When the power window lock switch is pressed:

1. The rear passenger control will not be able to operate the rear passenger power window
2. Note that the front passenger control is still able to operate the front passenger window and that the driver master control can still oper-ate all the power windows.

WARNING
Do not allow children to play with the power windows. Keep the driver’s door power window lock switch in the LOCK posi-tion. Serious injury or death can result from unintentional win-dow operation by a child.

NOTICE

1. To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This will also ensure the longevity of the fuse.
2. Never try to operate the main switch on the driver’s door and the individual door window switch in opposite directions at the same time. If this is done, the window will stop and cannot be opened or closed.

WIDE SUNROOF (IF EQUIPPED)

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console.

The Engine Start/Stop button must be in the ON or START position before you can open or close the sunroof.
The sunroof can be operated for approximately 30 seconds after the Engine Start/Stop button is pressed to the ACC or OFF position.
However, if the front doors are opened, the sunroof cannot be adjusted even within the 30 seconds period.

Information

1. In cold and wet climates, the sunroof may not work properly due to freezing conditions.
2. After the vehicle is washed or in a rainstorm, be sure to wipe off any water that is on the sunroof before operating it.

WARNING

1. Never adjust the sunroof or sunshade while driving. This could result in loss of control and an accident that may cause death, serious injury, or property damage.
2. Make sure heads, hands, arms or any other body parts or objects are out of the way before operating the sunroof.
3. Do not extend your head, arms or body outside the sunroof while driving, to avoid serious injury.
4. Do not leave the engine running and the key in your vehi-cle with unsupervised children.
   Unattended children could operate the sunroof, which could result in serious injury.
5. The sunroof is made of glass, subject to break in case of an accident. Passengers without the appropriate protection (e.g. seat belt, CRS, etc.) on may project out through the broken glass and may be seriously injured or even result in death.
6. Do not sit on the top of the vehicle. It may cause injury or vehicle damage.

NOTICE

1. Do not continue to move the sunroof control lever after the sun-roof is fully opened, closed, or tilted. Damage to the motor or system components could occur.
2. Make sure the sunroof is closed fully when leaving your vehicle. If the sunroof is left open, rain or snow may wet the interior of the vehicle. Also, leaving the sunroof open when the vehicle is unat-tended may invite theft.

Sunshade

1. To open the sunshade, pull the sunroof control lever backward to the first detent position.
2. To close the sunshade when the sunroof glass is closed, push the sunroof control lever forward.

To stop the sunroof movement at any point, push the sunroof control lever either forward or backward momen-tarily.

Information
Activating the control lever to the first detent requires only a very light touch.

Sliding the Sunroof

When the sunshade is closed
If you push the sunroof control lever backward past the first detent, the sunshade will slide all the way open and then the sunroof glass will slide all the way open.
To stop the sunroof movement at any point, push the sunroof control lever either forward or backward momentarily.

When the sunshade is opened
If you pull the sunroof control lever backward, the sunroof glass will slide all the way open. To stop the sunroof movement at any point, pull or push the sunroof control lever momentarily.

Information
Only the front glass of the sunroof opens and closes.

Tilting the Sunroof

When the sunshade is closed
If you push the sunroof control lever upward toward the roof of the vehicle, the sunshade will slide open then the sunroof glass will tilt open.
To stop the sunroof movement at any point, push the sunroof control lever either forward or backward momentarily.

When the sunshade is opened
If you push the sunroof control lever upward, the sunroof glass will tilt open.
To stop the sunroof movement at any point, push the sunroof control lever either forward or backward momentarily.

Closing the Sunroof

To close the sunroof glass
Push the sunroof control lever forward to the first detent position.

To close the sunroof glass with a sunshade
Push the sunroof control lever forward to the second detent position.
The sunroof glass will close, then the sunshade will close automatically. To stop the sunroof movement at any point, push the sunroof control lever either forward or backward momen-tarily.

Automatic reverse (if equipped)

If the sunroof senses any obstacle while it is closing automatically, it will reverse direction then stop to allow the object to be cleared.

WARNING
Small objects that can get caught between the sunroof glass and the front glass chan-nel may not be detected by the automatic reverse system. In this case, the sunroof glass will not detect the object and will not reverse direction.

NOTICE

1. Periodically remove any dirt that may accumulate on the sunroof guide rail or between the sun-roof and roof panel which can make a noise.
2. Do not try to open the sunroof when the temperature is below freezing or when the sunroof is covered with snow or ice, other-wise the motor could be dam-aged. In cold and wet climates, the sunroof may not work properly.

Resetting the Sunroof
The sunroof may need to be reset if the following conditions occur:

1. The battery is discharged or dis-connected or the sunroof fuse has been replaced or disconnected
2. The sunroof control lever is not operating correctly

To reset the sunroof, perform the following steps:

1. Turn the engine on and close the sunroof glass and sunshade completely.
2. Release the control lever.
3. Push and hold the sunroof control lever forward (to close the sunshade) for about 10 seconds until the sunroof moves slightly, then release the control lever.
4. Push and hold the sunroof control lever forward until the sunroof operates as follows:
   Sunshade Open → Glass Tilt Open → Glass Slide Open → Glass Slide Close → Sunshade Close

Then, release the control lever.
When this is complete, the sunroof system is reset.
For more information, contact an authorized retailer of Genesis Branded products.

Information
If you do not reset the sunroof, it may not work properly.

Sunroof Open Warning (if equipped)

1. If the driver turns off the engine when the sunroof is not fully closed, the warning chime will sound for approximately 3 seconds and the sunroof open warning will appear on the cluster LCD display.
2. If the driver turns off the engine and opens the door when the sunroof is not fully closed, the sunroof open warning will appear on the cluster LCD display until the door is closed or the sunroof is fully closed.

Close the sunroof securely when leaving your vehicle.

FAQs

Useful Links

View Full Manual: Genesis G70 2020 User Manual | Auto User Guide
Download Manuals: Manuals and Warranties | Genesis Resources | MyGenesis