Genesis G70 2020 Light Bulbs Maintenance User Manual

Introduction

Welcome to the Genesis G70 2020 universe, where innovation and elegance converge on the open road. The maintenance of the light bulbs that illuminate your way and guarantee your safety is a crucial component of vehicle maintenance. We will discuss the importance of light bulb upkeep for your Genesis G70 2020 in this introduction, illuminating the many types of bulbs and provide advice on how to keep them in top working order. Your Genesis G70 2020 has an advanced lighting system with numerous bulb types that have different functions. The visibility they provide, the intents they convey, and how enjoyable driving is overall are all greatly improved by the use of headlights, taillights, turn signals, brake lights, and interior lights. No of the time of day or the current weather, you can drive with confidence if the light bulbs in your Genesis G70 are kept up to date. You can ensure optimum visibility and prevent any problems that can jeopardize safety or result in traffic penalties by keeping an eye on the state of your bulbs.

Regular examination and replacement, as necessary, are crucial to keep your light bulbs in top functioning condition. It is wise to look for indicators of deterioration on the bulbs, such as cracks, discolouration, or dimming. Furthermore, it’s important to keep things clean by routinely wiping the bulbs down with a soft, lint-free cloth to get rid of any debris, dust, or grime that can reduce their brightness. The right type and size of bulb must be used when changing a bulb in your Genesis G70 2020 in accordance with the manufacturer’s specifications. By doing so, compatibility is ensured, and the bulb will function at its best and last a long time. It is advised to obtain expert assistance to ensure a safe and effective outcome if you are unclear about the replacement process or have worries about handling electrical components. Keep in mind that updating the light bulbs in your 2020 Genesis G70 is important for both road safety and keeping the vehicle’s cosmetic appeal. You can make the most of your opulent Genesis G70 2020 by taking proactive measures to examine, clean, and replace bulbs as needed to provide a well-lit and secure driving experience.

LIGHT BULBS

Consult an authorized retailer of Genesis Branded products to replace most vehicle light bulbs. It is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true for removing the headlamp assembly to get to the bulb(s). Removing/installing the headlamp assembly can result in damage to the vehicle.

Information
After heavy rain or washing, head-lamp and trunk lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and the outside temperature. This is similar to the condensation on your windows inside your vehicle during the rain and doesn’t indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have your vehicle checked by an authorized retailer of Genesis Branded products.

WARNING

1. Prior to replacing a lamp, depress the brake pedal, shift the gear into P (Park), apply the parking brake, press the Engine Start/Stop button to the OFF position, and take the key with you when leaving the vehicle to avoid sudden movement of the vehicle and to prevent possible electric shock.
2. Be aware the bulbs may be hot and may burn your fin-gers.

NOTICE

Light replacement
Be sure to replace the burned out bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system.

Headlamp lens
To prevent damage, do not clean the headlamp lens with chemical solvents or strong detergents.

Information

1. A normally functioning lamp may flicker momentarily to stabilize the vehicle’s electrical control system. However, if the lamp goes out after flickering momentarily, or continues to flicker, have the system checked by an authorized retailer of Genesis Branded products.
2. The position lamp may not turn on when the position lamp switch is turned on, but the position lamp and headlamp switch may turn on when the headlamp switch is turned on. This may be caused by network failures or vehicle electrical control system malfunction. If this occurs, have the system checked by an authorized retailer of Genesis Branded products.

Headlamp, Parking Lamp, Daytime Running Light, Turn Signal Lamp, and Side Marker

Type A

1. Headlamp (Low)
2. Headlamp (High)
3. Turn signal lamp
4. Daytime running light (DRL) & Parking lamp
5. Side marker

WARNING

1. Handle halogen bulbs with care. Halogen bulbs contain pressurized gas that will produce flying pieces of glass that could cause injuries if broken.
2. Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.
3. Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids.
4. Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit.
5. A bulb should be operated only when installed in a headlamp.
6. If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it.

Headlamp (High)

1. Open the hood.
2. Disconnect the negative battery cable.
3. Remove the headlamp bulb cover by turning it counterclockwise.
4. Disconnect the headlamp bulb socket connector.
5. Remove the bulb socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb socket align with the slots on the headlamp assembly.
6. Install a new headlamp bulb into the bulb socket.
7. Push the bulb socket into the headlamp assembly and turn the bulb socket clockwise.
8. Connect the headlamp bulb sock-et-connector.
9. Install the headlamp bulb cover by turning it clockwise.

Headlamp (Low)

1. Disconnect the negative battery cable.
2. Remove the service cover (1) under the wheel housing by pushing out the retainer clip with a slim tool. If it is difficult to remove the service cover because of the tire, steer the tire inward.
   
3. Remove the bulb cover by turning it counterclockwise.
4. Disconnect the bulb socket-connector.
5. Remove the bulb socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb socket align with the slots on the headlamp assembly.
6. Install a new bulb into the bulb socket.
7. Push the bulb socket into the headlamp assembly and turn the bulb socket clockwise.
8. Install the bulb cover by turning it clockwise.

Information
The headlamp aiming should be adjusted after an accident or after the headlamp assembly is reinstalled at an authorized retailer of Genesis Branded products.

Turn signal

1. Open the hood.
2. Disconnect the negative battery cable.
3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
5. Install a new bulb by inserting it into the socket and rotating it until it locks into place.
6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly.
7. Push the socket into the assembly and turn the socket clockwise.

Daytime running light (DRL), parking lamp and side marker
If the LED lamp does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Type B

1. Headlamp (High/Low)
2. Headlamp (HighA)
3. Daytime running light (DRL) & Parking lamp
4. Turn signal lamp
5. Side marker

Headlamp, parking lamp, turn sig-nal lamp, daytime running light and side marker
If the LED lamp does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Side Repeater Lamp Replacement

If the LED lamp does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Rear Combination Light Bulb Replacement

1. Stop/Tail lamp
2. Stop lamp
3. Turn signal lamp
4. Back-up lamp
5. Side marker

Stop/Tail lamp, stop lamp and side marker
If the LED lamp does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Turn signal lamp and back-up lamp

1. Turn the engine off.
2. Open the trunk.
3. Remove the service cover by turn-ing the lock (1) counterclockwise.
   
4. Remove the connector (1).
5. Remove the 4 nuts (2).
6. Remove the rear combination lamp assembly from the body of the vehicle.
   Information
   When removing the nut, be careful not to drop it on the floor as it is extremely difficult to find. Use a mag-netic pick up tool to find the nut if nec-essary.
   
7. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
8. Turn signal lamp (A)
   Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

    

   1. Back-up lamp (B)
      Remove the bulb by pulling it straight out.
9. Turn signal lamp (A)
   Insert a new bulb by inserting it into the socket and rotating it until it locks into place.

    

   1. ack-up lamp (B)
      Insert a new bulb by pushing it in into the socket.
10. Install the socket into the assem-bly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
11. Reinstall the lamp assembly to the body of the vehicle.

High Mounted Stop Lamp Replacement

If the high mounted stop lamp (LED)(1) does not operate, have the sys-tem be checked by an authorized retailer of Genesis Branded prod-ucts.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

License Plate Light Replacement

If the license plate lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Interior Light Replacement

Map lamp

If the map lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Room lamp

If the room lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Vanity mirror lamp

If the vanity mirror lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Glove box lamp

If the glove box lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

Trunk lamp

If the trunk lamp (LED) (1) does not operate, have the system be checked by an authorized retailer of Genesis Branded products.
The LED lamps cannot be replaced as a single unit because it is an inte-grated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may dam-age related parts of the vehicle.

APPEARANCE CARE

Exterior Care

Exterior general caution
It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label.

Protecting your vehicle’s finish Washing
To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water.
If you use your vehicle for off-road driving, you should wash it after each off-road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials. Make sure the drain holes in the lower edges of the doors and rocker panels are kept clear and clean.
Insects, tar, tree sap, bird droppings, industrial pollution and similar deposits can damage your vehicle’s finish if not removed immediately.
Even prompt washing with plain water may not completely remove all these deposits. A mild soap, safe for use on painted surfaces, should be used.
After washing, rinse the vehicle thor-oughly with lukewarm or cold water. Do not allow soap to dry on the fin-ish.

WARNING
After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water before getting on the road. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow forward speed.

NOTICE

1. Do not use strong soap, chemi-cal detergents or hot water, and do not wash the vehicle in direct sunlight or when the body of the vehicle is warm.
2. Be careful when washing the side windows of your vehicle. Especially, with high-pressure water, water may leak through the windows and wet the interi-or.
3. To prevent damage to the plastic parts, do not clean with chemi-cal solvents or strong deter-gents.

High-pressure washing

1. When using high-pressure wash-ers, make sure to maintain suffi-cient distance from the vehicle. Insufficient clearance or excessive pressure can lead to component damage or water penetration.
2. Do not spray the camera, sensors or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not oper-ate normally.
3. Do not bring the nozzle tip close to boots (rubber or plastic covers)or connectors as they may be dam-aged if they come into contact with high pressure water.
4. Do not use any high-pressure noz-zles, which induce either one-direct water stream or water swirling.

NOTICE

1. Water washing in the engine compartment including high pressure water washing may cause the failure of electrical cir-cuits located in the engine com-partment.
2. Never allow water or other liq-uids to come in contact with electrical/electronic compo-nents inside the vehicle as this may damage them.

NOTICE
Matte paint finish vehicle (if equipped)
Automatic car wash which uses rotating brushes should not be used as this can damage the sur-face of your vehicle. A steam cleaner which washes the vehicle surface at high temperature may result the oil to adhere and leave stains that is difficult to remove. Use a soft cloth (e.g. microfiber towel or sponge) when washing your vehicle and dry with a microfiber towel. When you hand wash your vehicle, you should not use a cleaner that finishes with wax. If the vehicle surface is too dirty (sand, dirt, dust, contami-nant, etc.), clean the surface with water before washing the car.

Waxing
A good coat of wax provides a barri-er between your paint and environ-mental contamination.
Keeping a good coat of wax on your vehicle will help protect it.
Wax the vehicle when water will no longer bead on the paint.
Always wash and dry the vehicle before waxing. Use a good quality liquid or paste wax, and follow the manufacturer’s instructions. Wax all metal trim to protect it and to main-tain its luster.
Removing oil, tar, and similar materi-als with a spot remover will usually strip the wax from the finish. Be sure to re-wax these areas even if the rest of the vehicle does not yet need wax-ing.

NOTICE

1. Wiping dust or dirt off the body with a dry cloth will scratch the finish.
2. Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plat-ed or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deteriora-tion.

NOTICE
Matte paint finish vehicle (if equipped)
Do not use any polish protector such as a detergent, an abrasive and a polish. In case wax is applied, remove the wax immedi-ately using a silicon remover and if any tar or tar contaminant is on the surface use a tar remover to clean. However, be careful not to apply too much pressure on the painted area.

Repairing your vehicle’s finish
Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.

NOTICE
If your vehicle is damaged and requires any metal repair or replace-ment, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced.

Matte paint finish vehicle (if equipped)
In case of matte paint finish vehi-cles, it is impossible to modify only the damaged area and repair of the whole part is necessary. If the vehicle is damaged and paint-ing is required, we recommend that you have your vehicle main-tained and repaired by an author-ized retailer of Genesis Branded products. Take extreme care, as it is difficult to restore the quality after the repair.

Bright-metal maintenance

1. To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
2. To protect the surfaces of bright-metal parts from corrosion, apply a coating of wax or chrome preser-vative and rub to a high luster.
3. During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.

Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, acceler-ated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection. Thoroughly flush the vehicle under-body and wheel openings with luke-warm or cold water once a month, after off-road driving and at the end of each winter. Pay special attention to these areas because it is difficult to see all the mud and dirt. It will do more harm than good to wet down the road grime without removing it. The lower edges of doors, rocker panels, and frame members have drain holes that should not be allowed to clog with dirt; trapped water in these areas can cause rust-ing.

Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.

NOTICE

1. Do not use abrasive cleaner, pol-ishing compound, solvent, or wire brushes on aluminum wheels.
2. Clean the wheel when it has cooled.
3. Use only a mild soap or neutral detergent, and rinse thoroughly with water. Also, clean the wheels after driving on salted roads.
4. Do not wash the wheels with high-speed car wash brushes.
5. Do not use any cleaners con-taining acid or alkaline deter-gents.

Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion, Genesis Branded Vehicle produces vehicles of the highest quality. However, this is only part of the job. To achieve the long-term cor-rosion resistance your vehicle can deliver, the owner’s cooperation and assistance is also required.

Common causes of corrosion
The most common causes of corro-sion on your vehicle are:

1. Road salt, dirt and moisture that is allowed to accumulate underneath the vehicle.
2. Removal of paint or protective coatings by stones, gravel, abra-sion or minor scrapes and dents which leave unprotected metal exposed to corrosion.

High-corrosion areas
If you live in an area where your vehi-cle is regularly exposed to corrosive materials, corrosion protection is particularly important. Some of the common causes of accelerated cor-rosion are road salts, dust control chemicals, ocean air and industrial pollution.

Moisture breeds corrosion
Moisture creates the conditions in which corrosion is most likely to occur. For example, corrosion is accelerated by high humidity, partic-ularly when temperatures are just above freezing. In such conditions, the corrosive material is kept in con-tact with the car surfaces by moisture that is slow to evaporate. Mud is particularly corrosive because it is slow to dry and holds moisture in contact with the vehicle. Although the mud appears to be dry, it can still retain the moisture and promote corrosion. High temperatures can also acceler-ate corrosion of parts that are not properly ventilated so the moisture can be dispersed. For all these rea-sons, it is particularly important to keep your vehicle clean and free of mud or accumulations of other mate-rials. This applies not only to the vis-ible surfaces but particularly to the underside of the vehicle.

To help prevent corrosion
Keep your vehicle clean
The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is partic-ularly important.

1. If you live in a high-corrosion area— where road salts are used, near the ocean, areas with industrial pollution, acid rain, etc.—, you should take extra care to prevent corrosion. In winter, hose off the underside of your vehicle at least once a month and be sure to clean the underside thoroughly when winter is over.
2. When cleaning underneath the vehicle, pay particular attention to the components under the fenders and other areas that are hidden from view. Do a thorough job; just dampening the accumulated mud rather than washing it away will accelerate corrosion rather than prevent it. Water under high pres-sure and steam are particularly effective in removing accumulated mud and corrosive materials.
3. When cleaning lower door panels, rocker panels and frame members, be sure that drain holes are kept open so that moisture can escape and not be trapped inside to accel-erate corrosion.

Keep your garage dry
Don’t park your vehicle in a damp, poorly ventilated garage. This cre-ates a favorable environment for cor-rosion. This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can con-tribute to corrosion unless it is well ventilated so moisture is dispersed.

Keep paint and trim in good condition
Scratches or chips in the finish should be covered with “touch-up” paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the atten-tion of a qualified body and paint shop is recommended. Bird droppings are highly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possible.

Interior Care
Interior general precautions
Prevent caustic solutions such as perfume and cosmetic oil, from con-tacting the interior parts because they may cause damage or discol-oration. If they do contact the interior parts, wipe them off immediately. See the instructions for the proper way to clean vinyl.

NOTICE

1. Never allow water or other liq-uids to come in contact with electrical/electronic compo-nents inside the vehicle as this may damage them.
2. When cleaning leather products (steering wheel, seats etc.), use neutral detergents or low alco-hol content solutions. If you use high alcohol content solutions or acid/ alkaline detergents, the color of the leather may fade or the surface may get stripped off.

Cleaning the upholstery and interior trim

Vinyl (if equipped)
Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner. Clean vinyl surfaces with a vinyl cleaner.

Fabric (if equipped)
Remove dust and loose dirt from fab-ric with a whisk broom or vacuum cleaner. Clean with a mild soap solu-tion recommended for upholstery or carpets. Remove fresh spots imme-diately with a fabric spot cleaner. If fresh spots do not receive immediate attention, the fabric can be stained and its color can be affected. Also, its fire-resistant properties can be reduced if the material is not proper-ly maintained.

NOTICE
Using anything but recommended cleaners and procedures may affect the fabric’s appearance and fire-resistant properties.

Leather (if equipped)

1. Features of seat leather
   1. Leather is made from the outer skin of an animal, which goes through a special process to be available for use. Since it is a nat-ural product, each part differs in thickness or density.
      Wrinkles may appear as a natural result of stretching and shrinking depending on the temperature and humidity.
   2. The seat is made of stretchable fabric to improve comfort.
   3. The parts contacting the body are curved and the side supporting area is high which provides driv-ing comfort and stability.
   4. Wrinkles may appear naturally from usage. It is not a fault of the products.

NOTICE

1. Wrinkles or abrasions which appear naturally from usage are not covered by warranty.
2. Belts with metallic accessories, zippers or keys inside the back pocket may damage the seat fabric.
3. Make sure not to wet the seat. It may change the nature of natu-ral leather.
4. Jeans or clothes which could bleach may contaminate the sur-face of the seat covering fabric.
5. Caring for the leather seats
   1. Vacuum the seat periodically to remove dust and sand on the seat. It will prevent abrasion or damage of the leather and maintain its qual-ity.
   2. Wipe the natural leather seat cover often with dry or soft cloth.
   3. Use of proper leather protector may prevent abrasion of the cover and helps maintain the color. Be sure to read the instructions and consult a specialist when using leather coating or protective agent.
   4. Light colored (beige, cream beige) leather is easily contaminated and the stain is noticeable. Clean the seats frequently.
   5. Avoid wiping with wet cloth. It may cause the surface to crack.
6. Cleaning the leather seats
   1. Remove all contaminations instant-ly. Refer to instructions below for removal of each contaminant.
   2. Cosmetic products (sunscreen, foundation, etc.)
      Apply cleansing cream on a cloth and wipe the contaminated spot. Wipe off the cream with a wet cloth and remove water with a dry cloth.
   3. Beverages (coffee, soft drink, etc.) Apply a small amount of neutral detergent and wipe until contami-nations do not smear.
   4. Oil
      Remove oil instantly with absorbable cloth and wipe with stain remover used only for natural leather.
   5. Chewing gum
      Harden the gum with ice and remove gradually.
7. Handling prime napa leather (if equipped)
   Try to avoid excessive sunlight and heat exposure. Excessive sunlight and heat exposure naturally fades and dries out napa leather, causing wrinkles and discoloration. If the napa leather is wet with liquid, immediately clean it with lint-free cloth to minimize damage. Do not scratch the napa leather surface with a sharp object. If your napa leather seat is bright colored, it may be contaminated or stained from dyed materials such as jeans.

Cleaning the seat belt webbing
Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instructions provided with the soap. Do not bleach or re-dye the webbing because this may weaken the seat belt.

Cleaning the interior window glass
If the interior glass surfaces of the vehicle become fogged (that is, cov-ered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass cleaner container.

NOTICE
Do not scrape or scratch the inside of the rear window. This may result in damage to the rear window defroster grid.

FAQs

Useful Links

View Full Manual: Genesis G70 2020 User Manual | Auto User Guide
Download Manuals: Manuals and Warranties | Genesis Resources | MyGenesis