GMC Acadia 2023 Vehicle Messages and Universal Remote System
The Vehicle Messages and Universal Remote features on the 2023 GMC Acadia make it easier to communicate and make the car more convenient. The Vehicle Messages system lets drivers know what’s going on with their cars and sends them important alerts, so they know right away if there are any problems or repair that needs to be done. However, the Universal Remote feature makes things even easier by letting users control compatible garage doors, security systems, and home automation devices from their Acadia. This makes daily chores easier and more streamlined. With these features, the 2023 Acadia is a car that not only puts safety first but also makes life easier for the people who drive it.
2023 GMC ACADIA Specs, Price, Features and Mileage (Brochure)
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another. The messages that do not require immediate action can be acknowledged and cleared by pressing V. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously; clearing the message does not correct the problem. If a SERVICE message appears, see your dealer.
Follow the instructions given in the messages. The system displays messages regarding the following topics:
- Service Messages
- Fluid Levels
- Vehicle Security
- Brakes
- Steering
- Ride Control Systems
- Driver Assistance Systems
- Cruise Control
- Lighting and Bulb Replacement
- Wiper/Washer Systems
- Doors and Windows
- Seat Belts
- Airbag Systems
- Engine and Transmission
- Tire Pressure
- Battery
Engine Power Messages
ENGINE POWER IS REDUCED
This message displays when the vehicle’s propulsion power is reduced. A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. Under certain conditions the performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible. Under certain operating conditions, propulsion will be disabled. Try restarting after the ignition has been off for 30 seconds.
Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is a protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension, Teen Driver if equipped, or tires.
Universal Remote System
Universal Remote System Programming
If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener but can be used for other devices. Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process. Keep the original hand-held transmitter for use in other vehicles as well as for future programming. Erase the programming when vehicle ownership is terminated. See “Erasing Universal Remote System Buttons” later in this section. To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door. Make sure the hand-held transmitter has a new battery for quicker and more accurate transmission of the radio-frequency signal.
Programming the Universal Remote System
For questions or programming help, see www.homelink.com/gm or call 1-800-355-3515. For calls placed outside the U.S., Canada, or Puerto Rico, international rates will apply and may differ based on landline or mobile phone. Programming involves time-sensitive actions and may time out causing the procedure to be repeated.
To program up to three devices:
- Hold the end of the hand-held transmitter about 3 to 8 cm (1 to 3 in) away from the Universal Remote system buttons with the indicator light in view. The hand-held transmitter was supplied by the manufacturer of the garage door opener receiver.
- Press and release one of the three Universal Remote system buttons to be programmed. Press and hold the hand-held transmitter button. Do not release the hand-held transmitter button until the indicator light changes from a slow to a rapid flash or continuous light. Then release the hand-held transmitter button.
- Some garage door openers may require the substitution of Step 2 with the procedure under “Radio Signals for Some Gate Operators” later in this section.
- Press and hold the newly programmed Universal Remote system button for five seconds while watching the indicator light and garage door activation.
- If the indicator light stays on continuously or the garage door moves when the button is pressed, then programming is There is no need to complete Steps 4–6.
- If the indicator light does not come on or the garage door does not move, a second button press may be required. For a second time, press and hold the newly programmed button for five seconds. If the indicator light is continuously lit, or the garage door moves, programming is complete.
- If the indicator light flashes rapidly and the garage door does not move, continue with the programming
Steps 4–6
Learn or Smart Button
- After completing Steps 1–3, locate the Learn or Smart button inside the garage on the garage door opener receiver. The name and color of the button may vary by manufacturer.
- Press and release the Learn or Smart button. Step 6 must be completed within 30 seconds of pressing this button.
- Return to the vehicle and firmly press and hold the trained Universal Remote system button for two seconds and Repeat the “press/hold/release” sequence up to three times to complete the training process.
The Universal Remote system should now activate the garage door. Repeat the process for programming the two remaining buttons.
Radio Signals for Some Gate Operators
For questions or programming help, see www.homelink.com/gm or call 1-800-355-3515. For calls placed outside the U.S., Canada, or Puerto Rico, international rates will apply and may differ based on landline or mobile phone. Some radio-frequency laws and gate operators require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for the Universal Remote system to pick up the signal during programming.
If the programming did not work, replace Step 2 under “Programming the Universal Remote System” with the following:
Press and hold the Universal Remote system button while pressing and releasing the hand-held transmitter button every two seconds until the signal has been successfully accepted by the Universal Remote system. The Universal Remote system indicator light will flash slowly at first and then change to a rapid flash or continuous solid-light. Proceed with Step 3 under “Programming the Universal Remote System” to complete.
Using the Universal Remote System
Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted.
Erasing Universal Remote System Buttons
Erase all programmed buttons when vehicle ownership is terminated.
To erase:
- Press and hold the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.
- Release both
Reprogramming a Single Universal Remote System Button
To reprogram any of the system buttons:
- Press and hold any one of the Do not release the button.
- The indicator light will begin to flash after 20 Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.”
FAQ
The Vehicle Messages system provides important alerts and information about the vehicle’s status and any maintenance needs.
Vehicle Messages are typically displayed on the vehicle’s infotainment screen or instrument cluster, ensuring that the driver is aware of any issues.
Yes, the system often provides diagnostic information, helping drivers and service technicians identify and address specific issues.
Depending on the model, some customization options may be available to tailor the alerts and messages to the driver’s preferences.
The Universal Remote feature allows users to control compatible garage doors, security systems, and home automation devices from within the Acadia.
The Universal Remote is typically programmed by following specific instructions in the owner’s manual, enabling it to sync with various devices.
The Universal Remote’s compatibility may vary, so it’s essential to check the Acadia’s manual for a list of supported devices and systems.
Depending on the model, the Acadia may allow multiple Universal Remote settings, allowing different users to control various devices.
Yes, Universal Remote systems typically have security measures in place to ensure the safety of your home and vehicle.
The Universal Remote system can often be turned on and off as needed to control home devices.
In most cases, the Universal Remote feature does not require additional accessories or subscriptions, but it’s essential to check with the manufacturer for specific requirements.
Depending on the model and manufacturer, some Universal Remote features may be compatible with smartphone apps for added convenience.
Yes, the Vehicle Messages system often provides maintenance reminders for services like oil changes and tire rotations.
Yes, the system may provide diagnostic information for engine or mechanical issues, allowing for prompt maintenance or repairs.
Vehicle Messages can often be cleared or reset after the underlying issue has been addressed, ensuring that drivers receive accurate information.
Useful Link
View Full User Guide: GMC Acadia 2023 User Guide
Download Manuals: https://www.cadillac.com/support/vehicle/manuals-guides
2023 GMC ACADIA Specs, Price, Features and Mileage (Brochure)