2009-2023 Harley Davidson FLHTCUTG Tri Glide Seat Installation
The decade from 2009 to 2023 was pivotal one in the development of the well-known trike model Harley Davidson FLHTCUTG Tri Glide, which is recognized for its comfort and stability. Harley Davidson made a number of seat technology breakthroughs during this time, giving riders better ergonomics and customizing possibilities for a better riding experience. With increased user-friendliness and consideration for riders’ preferences in seat height, padding, and style, the FLHTCUTG Tri Glide’s seat installation process improved. A variety of seat styles, including solo, two-up, and touring seats, were produced by Harley Davidson so that riders could select the arrangement that best suited their requirements and aesthetic preferences. This guide provides helpful insights into the various options, installation processes, and customization opportunities for the Harley Davidson FLHTCUTG Tri Glide seat installation progression from 2009 to 2023. Understanding the Tri Glide seat installation procedure will greatly improve your comfort and enjoyment on the open road, regardless of whether you’re a first-time owner or an experienced rider.
SEAT
Removal
- See CONTROLS AND INDICATORS, Tour-Pak. Open Tour-Pak to move the passenger seat backrest out of the way.
NOTE
The Tour-Pak must be positioned to the rear to gain access to the seat mounting bracket screw. If the Tour-Pak is in the for-ward position, remove the Tour-Pak and install in the rearward position. - Remove the fastener to detach the seat mounting bracket from top of the rear fender.
- To protect the finish of Tour-Pak, cover rear seat mounting bracket with the palm of your hand.
- See Figure 77. While pushing the seat forward, raise the rear of the seat until the bracket clears top of the Tour-Pak. Push seat rear-ward slightly to free the tongue from slot in the seat.
- Remove the seat from the frame.
Installation
- See Figure 78. Place seat on frame backbone.
- To protect the finish of Tour-Pak, cover the rear seat mounting bracket with the palm of the hand.
- While raising rear of the seat approximately 3 in. (76.2 mm), use another hand to firmly push the front of the seat downward and rearward until the tongue engages slot in seat.
- Push seat forward until rear fender seat retention nut is centered in hole of the mounting bracket.
- Install seat mounting fastener. Tighten to 20-40 in-lbs (2.3-4.5 Nm).
NOTE
If the seat retention nut is damaged or lost, see a service manual for instructions.
Warning: After installing the seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) - Pull up on seat to verify that it is properly secured, front and rear.
FAQ:
Yes, Harley Davidson offers a range of seats to accommodate various levels of comfort. You can select a seat based on your riding preferences.
In order to accommodate riders and passengers, Harley Davidson offers both solo and two-up seat arrangements.
The Tri Glide can accommodate touring seats, which are made for maximum comfort during long rides.
Under the seat, you will typically locate a single mounting bolt or lever. To remove the seat, loosen the bolt or pull back the lever.
Yes, there are companies that provide aftermarket seats for the Tri Glide that provide personalized seat options.
Check the features and directions for the particular seat to see whether there are height adjustment choices.
When choosing a new seat, take into account elements like comfort, riding style, and aesthetic preferences.
The owner’s manual includes installation instructions and lists the necessary basic hand tools.
Harley Davidson does offer heated seat options on various models, but they might need additional wiring and installation.
Harley Davidson offers accessories and seat installation kits to make the procedure easier.
Yes, a lot of seats may be purchased as a set that includes a backrest.
To improve rider comfort, some Harley Davidson seats have built-in lumbar support mechanisms.
Yes, you can alter your seat with one of the several cover options offered by Harley Davidson and aftermarket vendors.
Carefully adhere to the manufacturer’s instructions, making sure that all mounting points are correctly tightened in accordance with the advised torque specifications.
You can find online tutorials and instructional videos to help you with the seat installation process for your particular Tri Glide model.
Useful Link
View Full PDF: Harley Davidson FLHTCUTG Tri Glide 2009-2023 User Manual
Indicator Lamps:2009-2023 Harley Davidson FLHTCUTG Tri Glide Indicator Lamps