2021 Honda Insight Warning and Indicator Lights Instructions
The warning and indicator lighting in the 2021 Honda Insight serve as a sophisticated communication system, connecting the vehicle’s complex systems to the driving experience. These lights, resembling a constellation of illuminating stars on your dashboard, convey vital information, ensuring that you remain informed, empowered, and in charge throughout your entire journey. Imagine these lights as the silent yet vigilant companions of your Insight, each with its own message to impart. From engine health to safety features, they create a visual language that guides your interactions with the vehicle, fostering a seamless relationship between you and your automobile. These lights are your Insight’s constant associates in a world where automotive technology advances quickly. They reduce complex systems to readily interpretable symbols, enabling you to make informed decisions and maintain the health of your vehicle. As you settle into the driver’s seat of your 2021 Honda Insight, pause to admire the dashboard’s subtle illumination. These lights are more than just indicators; they are your vehicle’s method of communicating with you, ensuring that your driving experience is not only safe and efficient, but also connected to the technological core of your Insight.
Indicators
When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the power system has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the owner’s manual.
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Parking Brake and Brake System Indicator (Red)
|
- Comes on when the parking brake is applied, and goes off when it is released.
- Comes on when the brake fluid level is low.
- Comes on if there is a problem with the brake system.
- The beeper sounds and the indicator comes on if you drive with the parking brake not fully released.
- Comes on for about 30 seconds when you pull or push the electric parking brake switch when the power mode is in ACCESSORY or VEHICLE OFF.
- Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is set.
|
- Comes on while driving – Make sure the parking brake is released. Check the brake fluid level.
What to do when the indicator coumes on while driving
brake system indicator (amber) -Immediately stop in a safe place. Contact a dealer for repair. The brake pedal becomes harder to operate. Depress the pedal further than you normally do.
- Comes on along with the ABS indicator Have your vehicle checked by a dealer.
If the Brake System Indicator (Red) Comes On or Blinks
- Blinks and the brake system indicator (amber) comes on at the same time – There is a problem with the electric parking brake system. The parking brake may not be set.
Avoid using the parking brake and have your vehicle checked by a dealer immediately.
If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On
|
|
| |
|
|
|
|
|
Parking Brake and Brake System Indicator (Amber)
|
- Comes on if there is a problem with a system related to braking other than the conventional brake system.
- Comes on if there is a problem with the cooperative control with regenerative braking, the electric servo brake system, or the hill start assist system.
- Comes on if there is a problem with the electric parking brake system.
|
- Stays on constantly – Avoid high speeds and sudden braking. Take the vehicle to a dealer immediately.
- Comes on while driving – Avoid using the parking brake and have your vehicle checked by a dealer immediately.
|
|
- Comes on if there is a problem with the radar sensor.
- Indicator may come on temporarily when the Maximum Load Limit is exceeded.
|
- Make sure the total load is within the Maximum Load Limit.
Maximum Load Limit
- Stays on constantly – Have your vehicle checked by a dealer.
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Parking Brake and Brake System Indicator (Amber) |
- Comes on if there is a problem with the automatic brake hold system.
|
Automatic Brake Hold |
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Automatic Brake Hold System Indicator |
- Comes on when the automatic brake hold system is on.
|
Automatic Brake Hold |
|
| |
Automatic Brake Hold Indicator
|
- Comes on when the automatic brake hold is activated.
|
Automatic Brake Hold |
—
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
POWER SYSTEM
Indicator
|
- Comes on if there is a problem with the electric vehicle system.
- Comes on when the High Voltage battery temperature becomes high.
|
- Have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
 |
READY
Indicator |
- Comes on when the vehicle is ready to drive.
|
Turning on the Power |
 |
| |
EV Indicator |
- Comes on when the vehicle is moved by the motor, and the engine is not operating.
|
— |
— |
|
|
EV Mode Indicator |
- Comes on when the vehicle is in EV mode.
|
SPORT HYBRID i-MMD (intelligent Multi-Mode Drive) |
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Malfunction Indicator Lamp
|
- After you have set the power mode to ON, the vehicle performs system checks. However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off.
- Comes on if there is a problem with the emissions control system.
- Blinks when a misfire in the engine’s cylinders is detected.
- Comes on if the fuel fill cap is loose or missing.
|
- Readiness codes are part of the on board diagnostics for the emissions control systems.
Testing of Readiness Codes
- Comes on while driving – Have your vehicle checked by a dealer.
- Blinks while driving – Stop in a safe place where there are no flammable objects. Stop the power system for 10 minutes or more, and wait for it to cool down. Then, take your vehicle to a dealer.
If the Malfunction Indicator Lamp Comes On or Blinks
- Comes on – Check the fuel cap before taking your vehicle to a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
12-Volt Battery Charging System Indicator |
- Comes on when the 12-volt battery is not charging.
|
- Comes on while driving – Turn off the climate control system and rear defogger in order to reduce electricity consumption.
If the 12-Volt Battery Charging System Indicator Comes On
|
 |
| |
Shift Position Indicator |
• Indicates the current shift position. |
Shifting |
—
|
|
|
Deceleration Paddle Selector Indicator |
- Comes on when the paddle selector is pulled.
- Blinks when deceleration does not occur while pulling the paddle selector.
- Comes on with M when SPORT mode is selected and pulling the paddle selector.
|
Deceleration Paddle Selector |
—
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Transmission System Indicator
|
- The current shift position blinks if the transmission system has a problem.
|
- Blinks while driving – Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately.
|
 |
- The current shift position or all the shift positions blink if there is a problem with the transmission and the vehicle is no longer able to run.
|
- Immediately park your car in a safe place.
Emergency Towing
- Have your vehicle checked by a dealer.
|
|
- The current shift position or all the shift positions blink if there is a problem with the transmission and it is not possible to select (P.
|
- While the vehicle is stopped, apply the parking brake.
- Have your vehicle checked by a dealer immediately.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Seat Belt Reminder Indicator
|
- Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, then the indicator comes on.
- If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later.
- Blinks while driving if either you and/or the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.
|
- The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.
- Stays on after you and/or the front passenger has fastened the seat belt(s) – A detection error may have occurred in the sensor. Have your vehicle checked by a dealer.
Seat Belt Reminder
|
|
|
|
Low Fuel Indicator
|
- Comes on when the fuel reserve is running low (approximately 1.59
U.S. gal./6.0 Liter left).
- Blinks if there is a problem with the fuel gauge.
|
- Comes on
Refuel your vehicle as soon as possible.
- Blinks
Have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
 |
Anti-lock Brake System (ABS) Indicator |
- Comes on if there is a problem with the ABS.
|
- Stays on constantly
Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
Anti-lock Brake System (ABS)
|
 |
|
|
Supplemental Restraint System Indicator |
- Comes on if a problem with any of the following is detected:
- Supplemental restraint system
- Side airbag system
- Side curtain airbag system
- Seat belt tensioner
|
- Stays on constantly
Have your vehicle checked by a dealer.
|
|
|
|
Electric Power Steering (EPS) System Indicator |
• Comes on if there is a problem with the EPS system. |
- Stays on constantly
Have your vehicle checked by a dealer.
If the Electric Power Steering (EPS) System Indicator Comes On
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Vehicle Stability AssistTM (VSA®) System Indicator |
- Blinks when VSA® is active.
- Comes on if there is a problem with the VSA® system.
|
- Stays on constantly – Have your vehicle checked by a dealer.
Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System
|
 |
- Comes on if the VSA® system is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
|
|
Vehicle Stability AssistTM (VSA®) OFF Indicator |
- Comes on when you partially disable VSA®.
|
VSA® On and Off |
|
- Comes on if the VSA® system is deactivated temporarily after the 12-volt battery has been disconnected, then re-connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Low Tire Pressure/TPMS Indicator |
- May come on briefly if the power mode is set to ON and the vehicle is not moved within 45 seconds, to indicate the calibration process is not yet complete.
- Comes on and stays on when:
- One or more tires’ pressures are determined to be significantly low.
- The system has not been calibrated.
|
- Comes on while driving – Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
- Stays on after the tires are inflated to the recommended pressures – The system needs to be calibrated.
TPMS Calibration
|
 |
- Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a compact spare tire* is temporarily installed.
|
- Blinks and remains on
Have your vehicle checked by a dealer. If the vehicle is fitted with a compact spare tire, get your regular tire repaired or replaced and put back on your vehicle as soon as you can.
|
|
- Comes on if the TPMS is deactivated temporarily after the 12-volt battery has been disconnected, then re- connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Turn Signal and Hazard Warning Indicators |
- Blinks when you operate the turn signal lever.
- Blink along with all turn signals when you press the hazard warning button.
|
- Does not blink or blinks rapidly
Replacing Light Bulbs
|
—
|
| |
High Beam Indicator |
- Comes on when the high beam headlights are on.
|
— |
— |
|
|
Lights On Indicator |
- Comes on when the light switch in a position other than OFF or when the switch is set to AUTO and the exterior lights come on.
|
- If you set the power mode to VEHICLE OFF while the lights are on, a chime sounds when the driver’s door is opened.
|
— |
| |
Fog Light Indicator* |
- Comes on when the fog lights are on.
|
— |
— |
| |
Auto High
Beam Indicator |
- Comes on when all the operating conditions of the auto high-beam are met.
|
Auto High-Beam |
— |
| Indicator |
Name |
On/Blinking |
Explanation |
Message*1 |
|
Immobilizer System Indicator |
- Blinks if the immobilizer system cannot recognize the key information.
|
- Blinks
You cannot start the power system. Set the power mode to VEHICLE OFF*1, then select the ON mode again.
- Repeatedly blinks
The system may be malfunctioning. Have your vehicle checked by a dealer.
- Do not attempt to alter this system or add other devices to it. Electrical problems can occur.
|
 |
|
|
Security System Alarm Indicator |
- Blinks when the security system alarm has been set.
|
Security System Alarm |
— |
- Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
System Message Indicator |
- Comes on along with a beep when a problem is detected. A system message on the driver information interface appears at the same time.
|
- While the indicator is on, press the (home) button to see the message again.
Accessing contents in the main display
- Refer to the Indicators information in this chapter when a system message appears on the driver information interface. Take the appropriate action for the message.
- The driver information interface does not return to the normal screen unless the warning is canceled, or the left selector wheel is pressed.
|
—
|
|
|
ECON Mode Indicator |
- Comes on when the ECON mode is on.
|
ECON Mode |
 |
|
|
SPORT Mode Indicator |
- Comes on when you press the
SPORT button.
- The ambient meter remains lit up in red as long as SPORT mode is on.
|
SPORT Mode |
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber) |
- Comes on if there is a problem with ACC with Low Speed Follow.
|
- Stays on constantly – Have your vehicle checked by a dealer.
|
 |
- Indicator may come on temporarily when the Maximum Load Limit is exceeded.
- ACC with Low Speed Follow has been automatically canceled.
|
- Make sure the total load is within the Maximum Load Limit.
Maximum Load Limit
- Stays on constantly – Have your vehicle checked by a dealer.
|
- Comes on if the ACC with Low Speed Follow is deactivated temporarily after the 12-volt battery has been disconnected, then re- connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Green) |
- Comes on when you press the MAIN button.
|
Adaptive Cruise Control (ACC) with Low Speed Follow |
—
|
|
|
Lane Keeping Assist System (LKAS)
Indicator (Amber)
|
- Comes on if there is a problem with the LKAS.
|
- Stays on constantly
Have your vehicle checked by a dealer.
|
 |
|
|
Lane Keeping Assist System (LKAS)
Indicator (Green)
|
- Comes on when you press the MAIN button.
|
Lane Keeping Assist System (LKAS)
|
— |
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
Safety Support Indicator (Amber) |
- Comes on if there is a problem with RDM, CMBSTM or blind spot information system*.
|
- Stays on constantly
Have your vehicle checked by a dealer.
|
 |
- Indicator may come on temporarily when the Maximum Load Limit is exceeded.
|
- Make sure the total load is within the Maximum Load Limit.
Maximum Load Limit
- Stays on constantly
Have your vehicle checked by a dealer.
|
- Comes on if the RDM and CMBSTM are deactivated temporarily after the 12-volt battery has been disconnected and then re- connected.
|
- Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Safety Support Indicator (Amber) |
- Comes on when RDM and/or CMBSTM shuts itself off.
|
- Stays on
The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
- Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera.
Front Sensor Camera
|
|
| Models with blind spot information system
- Comes on when mud, snow, or ice has accumulated in the vicinity of the blind spot information system sensor.
|
- Comes on while driving
Something may be interfering with the Blind spot information System sensor. Check the vicinity of the Blind spot information System sensor and remove any obstacles.
Blind spot information System
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Safety Support Indicator (Amber)
|
- Comes on when RDM and/or CMBSTM shuts itself off.
|
- Stays on
The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
- Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera.
Front Sensor Camera
|
|
| Models with blind spot information system
- Comes on when mud, snow, or ice has accumulated in the vicinity of the blind spot information system sensor.
|
- Comes on while driving
Something may be interfering with the Blind spot information System sensor. Check the vicinity of the Blind spot information System sensor and remove any obstacles.
Blind spot information System
|
|
| Indicator |
Name |
On/Blinking |
Explanation |
Message |
|
|
Safety Support Indicator (Green/Gray) |
- Lights up in green when RDM, CMBSTM and blind spot information system* are on.
- Lights up in green and gray when RDM, CMBSTM or blind spot information system* are off.
- Lights up in gray when RDM, CMBSTM and blind spot information system* are off.
|
RDM On and Off
CMBSTM On and Off
Blind spot information System On and Off |
 |
FAQs
What does the “Check Engine” light mean on my 2021 Honda Insight?
The “Check Engine” light suggests that there may be a problem with the emissions or engine systems. To pinpoint the precise issue, it is advised to have a professional examine the diagnostics on your ca
Why is the “Battery Charging System” light illuminated?
A problem with the battery charging system is indicated by this light. It can be caused by a bad battery, alternator, or wiring. To avoid a potential breakdown, immediate intervention is advised.
What does the “Tire Pressure Monitoring System (TPMS)” light mean?
Your tires could not have enough air pressure, according to the TPMS light. Check tire pressure and make necessary adjustments. If the light stays on, there can be a sensor issue that needs to be fixed.
Why is the “Electric Power Steering (EPS) Warning” light on?
A problem with the electric power steering system is indicated by this light. Checking the system is essential since driving without adequate power steering assistance can be challenging and dangerous.
What does the “Brake System” warning light mean?
A potential problem with the braking system is indicated by the “Brake System” light. It can be the result of a more serious issue, low braking fluid, damaged brake pads, or both. Inspection right away is advised.
Why is the “ABS” light illuminated?
The “ABS” light signifies that the anti-lock braking system is malfunctioning. Regular braking should continue to work, but there is a chance that the ABS system won’t. Have an expert inspect your car.
What does the “VSA” light mean?
A potential problem with the stability control system is indicated by the “VSA” (Vehicle Stability Assist) light. It can be because of slick road conditions or a system flaw. For guidelines on how to address the circumstance, consult the owner’s manual for your car.
Why is the “Oil Pressure” light on?
Low engine oil pressure is indicated by the “Oil Pressure” light. Check the oil level right away, then stop the car and add more if necessary. Low oil pressure while driving might seriously harm the engine.
What does the “SRS” light indicate?
An issue with the airbag system is indicated by the “SRS” (Supplemental Restraint System) light. Have your car evaluated by a professional because an airbag system that isn’t working properly might not deploy in an accident.
Why is the “Charging System” light illuminated?
A problem with the vehicle’s electrical charging system is indicated by the “Charging System” light. Frequently, the alternator or batteries are involved. Ask a specialist to help you identify and fix the issue.
What does the “Lane Keeping Assist System (LKAS) Indicator” light mean?
. What does the “Maintenance Minder” light mean?
Why is the “Adaptive Cruise Control (ACC) Indicator” light on?
When the “LKAS” light is on, the Lane Keeping assist system is working to keep you in your lane. If it blinks or remains on continuously, there may be a problem with the system that has to be fixed.
What does the “Low Fuel” warning light mean?
The “ACC” light shows that the adaptive cruise control system is engaged and keeping a predetermined following distance from the car in front of you. The light may blink or remain on if there is a problem with the system.
Why is the “Hill Start Assist” light illuminated?
The technology is on and working when the “Hill Start Assist” light is illuminated, which helps stop the car from rolling backward up an incline. There may be a system problem if the light remains on when not in an inclined position.
What does the “Maintenance Minder” light mean?
Based on your driving habits, the “Maintenance Minder” light notifies you when planned maintenance intervals are approaching. Information on the precise maintenance required can be found in your owner’s handbook.
Useful Links
Download Manual: Manuals and Warranty | MyGarage | Honda
View Full Manual: 2021 Honda Insight User Manual | Auto User Guide
