2021 Honda Passport Fuses and Fuse Box | How To fix Blown Fuse
Welcome to the definitive resource for comprehending and controlling the 2021 Honda Passport’s fuse system! Fuses are essential for protecting the electrical parts of your car, and knowing how to replace a blown fuse can help you save time and trouble. So come along with us as we explore the mysteries of the 2021 Honda Passport’s fuse system, regardless of your level of experience with auto maintenance. Together, we can ensure that your passport continues to function properly on the road ahead by giving you the confidence to troubleshoot and fix blown fuses.
Fuses
Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF (LOCK) and check to see if any applicable fuse is blown.
Engine Compartment Fuse Box Type A
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number. Located near the passenger’s side damper house. Push the tabs to open the box.
Circuit protected and fuse rating
1 |
− |
(70 A) |
REAR BLOWER |
30 A |
|
ABS/VSA MTR |
40 A |
|
ABS/VSA FSR |
20 A |
|
MAIN FAN |
30 A |
|
MAIN FUSE |
150 A |
|
|
ENGINE MOUNT |
30 A |
|
18 |
PASSENGER P/SEAT(SLIDE)* |
(20 A) |
2 |
FRONT BLOWER |
40 A |
|
19 |
− |
− |
|
|
A/C INVERTER* |
(30 A) |
|
20 |
MG CLUTCH |
7.5 A |
|
|
STANDARD AMP* |
(30 A) |
|
21 |
MAIN RLY |
15 A |
|
|
REAR DEF |
40 A |
|
22 |
FI SUB |
15 A |
|
|
− |
(30 A) |
|
23 |
IG COIL |
15 A |
|
|
PREMIUM AMP* |
(20 A) |
|
24 |
DBW |
15 A |
|
|
|
|
|
25 |
SMALL/STOP MAIN |
20 A |
|
|
|
|
|
26 |
BACK UP |
10 A |
|
|
|
|
|
27 |
HTD STRG WHEEL* |
(15 A) |
|
|
|
|
|
28 |
HORN |
10 A |
|
4 |
PARKING LIGHT |
10 A |
|
29 |
RADIO/USB |
15 A |
|
5 CRUISE CANCEL SW 7.5 A 6 STOP LIGHT 10 A 7 FI SUB VSS 10 A |
|
|
|
Engine Compartment Fuse Box Type B
Fuse locations are shown on the fuse box cover. Locate the fuse in question by the fuse number and box cover number. Located near the brake fluid reservoir. Push the tabs to open the box.
Circuit protected and fuse rating
1 |
− |
(40 A) |
4WD* |
(20 A) |
|
IG MAIN |
30 A |
|
IG MAIN2 |
30 A |
|
P/TAILGATE MOTOR* |
(40 A) |
|
F/B MAIN2 |
60 A |
|
F/B MAIN |
60 A |
|
EPS |
60 A |
|
2 TRAILER MAIN |
(30 A) |
|
3 TRAILER E-BRAKE |
(20 A) |
|
|
4 BATTERY SENSOR |
7.5 A |
|
|
5 H/L HI MAIN |
20 A |
|
|
6 P/TAILGATE CLOSER* |
(20 A) |
|
|
7 CTR ACC SOCKET |
20 A |
|
|
8 REAR ACC SOCKET* |
(20 A) |
|
|
9 FRONT WIPER DEICER* |
(15 A) |
|
|
10 ACC/IG2_MAIN |
10 A |
|
|
11 TRAILER CHARGE |
(20 A) |
|
|
12 IDLE STOP ST CUT |
(30 A) |
|
|
13 IDLE STOP |
(30 A) |
|
|
14 IDLE STOP |
(30 A) |
|
|
15 ELECTRONIC GEAR (15 A) SELECTOR |
|
Interior Fuse Box Type A
Located under the dashboard.
Fuse locations are shown on the label on the outer side of the side panel cover. Locate the fuse in question by the fuse number and label number.
Circuit protected and fuse rating
Interior Fuse Box Type B
Located under the dashboard.
Fuse locations are shown on the image. Locate the fuse in question by the fuse number and label number.
Circuit protected and fuse rating
|
|
Circuit Protected |
Amps |
|
A |
METER |
10 A |
|
|
B |
ABS/VSA |
7.5 A |
|
|
C |
ACG |
7.5 A |
|
|
D |
MICU |
7.5 A |
|
|
E |
AUDIO |
15 A |
|
|
F |
BACK UP |
10 A |
|
|
|
G |
ACC |
7.5 A |
|
Inspecting and Changing Fuses
- Set the power mode to VEHICLE OFF
(LOCK). Turn the headlights and all accessories off. - Remove the fuse box cover.
- Check the large fuse in the engine compartment.
- If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
- Inspect the small fuses in the engine compartment and the vehicle interior.
- If there is a blown fuse, remove it with the fuse puller and replace it with a new one.
NOTICE
Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.
Use the charts to locate the fuse in question and confirm the specified amperage on the fuse label.
Replace fuse with a spare fuse of the same specified amperage.
There is a fuse puller in the engine compartment fuse box.
FAQs
Fuses guard electrical parts by cutting the circuit in the event of an overcurrent, which keeps the system from being harmed.
The fuse box in the Passport is usually found under the hood or beneath the dashboard on the driver’s side.
Examine the fuse visually for any broken wires inside, or check for continuity with a multimeter.
Usually, you’ll need replacement fuses with the appropriate amperage as well as a fuse puller or a pair of needle-nose pliers.
Look for markings on the fuse box cover or consult the owner’s manual for your Passport to find out the fuse amperage ratings.
It is not advised because it may cause the electrical system to become damaged. Use the amperage fuse specified every time.
After turning off the car, find the fuse box, take out the blown fuse with pliers or a fuse puller, and replace it with a new one that is inserted securely.
Depending on the circuit, the Passport may utilize cartridge-type fuses or blade-type fuses.
Indeed, a blown fuse can impact a number of electrical parts, resulting in problems like power windows or a radio that doesn’t work.
The fuse may be blowing due to an underlying problem. Seek advice from a qualified mechanic to identify and resolve the issue.
To prevent electrical shock and damage, always work on the fuse box while the car is off.
Can I bypass a blown fuse to temporarily restore functionality?
It is not advised since it may harm the electrical system and pose a risk to public safety.
Check fuses on a regular basis, especially during routine maintenance checks or if you notice any electrical problems.
Fuse performance can be affected by extreme temperatures or moisture, but fuses are made to withstand normal environmental conditions.
It’s safest to get help from a qualified mechanic if you’re unsure or uncomfortable in order to stop further damage to your car.
Useful Links
View Full PDF: Honda Passport 2021 User Manual|Auto User Guide
2021 Honda Passport Fuses and Fuse Box | How To fix Blown Fuse