2022 Honda Accord Indicators
The 2022 Honda Accord’s indicators are important ways to communicate and were carefully built to improve the driver’s experience and the safety of everyone inside. These signs show how dedicated Honda is to precise engineering and user-centered design by combining form and function in a way that looks great and works well. The instrument cluster has many indicators that show important data at a glance, such as speed, fuel level, navigation instructions, and maintenance alerts. All of this information is given in a way that is clear and easy to understand. The Accord’s advanced warning and indicator lights are also very important for keeping drivers aware and safe. They let drivers know about dangerous situations like low tire pressure, engine problems, and impending collision risks. The 2022 Accord’s indicators’ seamless merging of information and safety features show Honda’s dedication to providing a driving experience where innovation and dependability meet, making every trip not only efficient but also fun and safe.
https://www.youtube.com/watch?v=ZX9c6MbbYKI
Indicators
Parking Brake and Brake System Indicator (Red)
Parking Brake and Brake System Indicator (Amber)
Automatic Brake Hold System Indicator
Automatic Brake Hold Indicator
Malfunction Indicator Lamp
Charging System Indicator
Shift Position Indicator
M (sequential mode*/ 7-speed manual shift mode*) Indicator*/Gear Selection Indicator*
Transmission System Indicator
Seat Belt Reminder Indicator
Low Fuel Indicator
Anti-lock Brake System (ABS) Indicator
Supplemental Restraint System Indicator
Auto High-Beam Indicator
Vehicle Stability AssistTM (VSA®) System Indicator
Vehicle Stability AssistTM (VSA®) OFF Indicator
Electric Power Steering (EPS) System Indicator
Low Tire Pressure/TPMS Indicator
Turn Signal and Hazard Warning Indicators
High Beam Indicator
Lights On Indicator
Fog Light Indicator*
System Message Indicator
ECON Mode Indicator
SPORT Mode Indicator*
Cruise Mode Indicator (White/Green)
Immobilizer System Indicator
Security System Alarm Indicator
Auto Idle Stop Indicator (Green)*
Auto Idle Stop System Indicator (Amber)*
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber)
Adaptive Cruise Control (ACC) with Low-Speed Follow Indicator (White/Green)
Lane Keeping Assist System (LKAS) Indicator (Amber)
Lane Keeping Assist System (LKAS) Indicator (White/Green)
Safety Support Indicator (Amber)
Safety Support Indicator (Green/Gray)
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the owner’s manual.
Indicator | Name | On/Blinking | Explanation | Message |
|
Parking Brake and Brake System Indicator (Red) |
• Comes on when the parking brake is applied, and goes off when it is released.
• Comes on when the brake fluid level is low. • Comes on if there is a problem with the brake system. • The beeper sounds and the indicator comes on if you drive with the parking brake applied. • Comes on for about 30 seconds when you apply the electric parking brake while the power mode is in ACCESSORY or VEHICLE OFF, then goes off. • Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is applied, then goes off. |
• Comes on while driving – Make sure the parking brake is released. Check the brake fluid level.
2 What to do when the indicator comes on while driving • Comes on along with the Parking Brake and Brake System Indicator (amber) – Immediately stop in a safe place. Contact a dealer for repair. The brake pedal becomes harder to operate. Depress the pedal further than you normally do. 2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On • Comes on along with the ABS indicator – Have your vehicle checked by a dealer. 2 If the Brake System Indicator (Red) Comes On or Blinks • Blinks and the Parking Brake and Brake System Indicator (amber) comes on at the same time – There is a problem with the electric parking brake system. The parking brake may not be set. Avoid using the parking brake and have your vehicle checked by a dealer immediately. 2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On |
|
Indicator | Name | On/Blinking | Explanation | Message |
![]() |
Parking Brake and Brake System Indicator (Amber) | • Comes on if there is a problem with a system related to braking other than the conventional brake system. | • Comes on while driving – Avoid high speeds and sudden braking. Take the vehicle to a dealer immediately. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Parking Brake and Brake System Indicator (Amber) | • Comes on if there is a problem with the electric parking brake system and/or the automatic brake hold system. | ● Stays on constantly – Avoid using the parking brake and have your vehicle checked by a dealer immediately. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
![]() |
Parking Brake and Brake System Indicator (Amber) |
● Comes on if there is a problem with the radar sensor.
● Indicator may come on temporarily when the Maximum Load Limit is exceeded. |
● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit ● Stays on constantly – Have your vehicle checked by a dealer. |
— |
|
Automatic Brake Hold System Indicator |
● Comes on when the automatic brake hold system is on. |
2 Automatic Brake Hold |
![]() |
![]() |
Automatic Brake Hold Indicator | ● Comes on when the automatic brake hold is activated. | 2 Automatic Brake Hold | — |
Indicator | Name | On/Blinking | Explanation | Message |
|
Malfunction Indicator Lamp |
• After you have set the power mode to ON, the vehicle performs system checks. However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off. | • Readiness codes are part of the on-board diagnostics for the emissions control systems.
2 Testing of Readiness Codes |
— |
● Comes on if there is a problem with the emissions control systems.
● Blinks when a misfire in the engine’s cylinders is detected. |
2 If the Malfunction Indicator Lamp Comes On or Blinks |
|
Indicator | Name | On/Blinking | Explanation | Message |
![]()
|
Charging System Indicator |
• Comes on when there is a problem with the charging system. | • Stop in a safe place and contact a dealer immediately.
2 Checking the Battery 2 If the Charging System Indicator Comes On |
![]() |
![]() |
Shift Position Indicator |
• Indicates the current shift position. |
2 Shifting |
— |
|
M (sequential mode*/7- speed manual shift mode*) Indicator*/ Gear Selection Indicator* | • Comes on when the sequential mode*/7-speed manual shift mode* is applied. |
2 Sequential Mode 2 7-Speed Manual Shift Mode |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
Transmission System Indicator |
• The current shift position blinks if the transmission system has a problem. | • Blinks while driving – Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately. | ![]() |
• The indicated current shift position blinks if you cannot put the transmission into (R due to a transmission system failure. | • Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately. | ![]() |
||
• The indicated current shift position blinks if the transmission system has a problem and the performance of the vehicle is reduced. | • Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately. | ![]() |
||
• The indicated current shift position blinks if the transmission system has a problem and the paddle shifters cannot be used. | • Have your vehicle checked by a dealer immediately. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Transmission System Indicator |
• The current shift position or all the shift positions blink if there is a problem with the transmission and the vehicle is no longer able to run. | • Immediately park your car in a safe place.
2 Emergency Towing • Have your vehicle checked by a dealer. |
![]() |
• The current shift position or all the shift positions blink if there is a problem with the transmission and it is not possible to select (![]() |
• Depending on the circumstances, you can set the power mode to ON as an emergency measure.
2 If the Transmission System Indicator Blinks along with the Warning Message • While the vehicle is stopped, apply the parking brake. • Have your vehicle checked by a dealer immediately. |
|
Indicator | Name | On/Blinking | Explanation | Message |
|
Transmission System Indicator |
● Blinks if the transmission system has a problem. | ● Blinks while driving – Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately. | ![]() |
● Blinks if the transmission system has a problem and the performance of the vehicle is reduced. | ● Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately. | ![]() |
||
Models with paddle shifters
● Blinks if the transmission system has a problem and the paddle shifters cannot be used. |
● Have your vehicle checked by a dealer immediately. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Seat Belt Reminder Indicator |
• Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, then the indicator comes on.
• If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later. • Comes on for a while when the rear seat belt is unfastened while the power mode in ON. • Blinks while driving if you and/or any passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals. |
• The beeper stops and the indicator goes off when you and the passengers fasten their seat belts.
• Stays on after you and/or the passengers have fastened the seat belt(s) – A detection error may have occurred in the sensor. Have your vehicle checked by a dealer. 2 Seat Belt Reminder |
|
Indicator | Name | On/Blinking | Explanation | Message |
|
Low Fuel Indicator |
• Comes on when the fuel reserve is running low (approximately
2.2 U.S. gal./8.4 L left). • Blinks if there is a problem with the fuel gauge. |
• Comes on – Refuel your vehicle as soon as possible.
• Blinks – Have your vehicle checked by a dealer. |
|
|
Anti-lock Brake System (ABS) Indicator |
• Comes on if there is a problem with the ABS. | • Stays on constantly – Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
2 Anti-lock Brake System (ABS) |
![]() |
|
Supplemental Restraint System Indicator |
• Comes on if a problem with any of the following is detected:
– Supplemental restraint system – Knee airbag system – Side airbag system – Side curtain airbag system – Seat belt tensioner |
• Stays on constantly – Have your vehicle checked by a dealer. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
![]() |
Auto High- Beam Indicator | • Comes on when all the operating conditions of the auto high-beam are met. |
2 Auto High-Beam |
— |
|
Vehicle Stability AssistTM (VSA®) System Indicator |
● Blinks when VSA® is active.
● Comes on if there is a problem with the brake assist system, VSA® system or hill start assist system. |
● Stays on constantly – Have your vehicle checked by a dealer.
2 Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System |
|
● Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Vehicle Stability AssistTM (VSA®) OFF Indicator |
● Comes on when you partially disable VSA®. |
2 VSA® On and Off |
![]() |
● Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ![]() |
||
|
Electric Power Steering (EPS) System Indicator |
• Comes on if there is a problem with the EPS system. | • Stays on constantly – Have your vehicle checked by a dealer.
2 If the Electric Power Steering (EPS) System Indicator Comes On |
![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Low Tire Pressure/ TPMS Indicator |
● May come on briefly if the power mode is set to ON and the vehicle is not moved within 45 seconds, to indicate the calibration process is not yet complete.
● Comes on and stays on when: – One or more tires’ pressures are determined to be significantly low. – The system has not been calibrated. |
● Comes on while driving – Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
● Stays on after the tires are inflated to the recommended pressures – The system needs to be calibrated. 2 TPMS Calibration |
|
● Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a compact spare tire is temporarily installed. | ● Blinks and remains on – Have your vehicle checked by a dealer. If the vehicle is fitted with a compact spare tire, get your regular tire repaired or replaced and put back on your vehicle as soon as you can. | ![]() |
||
● Comes on if the TPMS is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Turn Signal and Hazard Warning Indicators | • Blinks when you operate the turn signal lever.
• Blink along with all turn signals when you press the hazard warning button. |
• Does not blink or blinks rapidly
2 Replacing Light Bulbs |
— |
![]() |
High Beam Indicator | • Comes on when the high-beam headlights are on. |
— |
— |
|
Lights On Indicator | • Comes on when the parking, tail, and other external lights are on. | 2 Light Switches | — |
![]() |
Fog Light Indicator* | • Comes on when the fog lights are on. |
2 Fog Lights* |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
Immobilizer System Indicator |
• Blinks if the immobilizer system cannot recognize the key information. | • Blinks – You cannot start the engine. Set the power mode to VEHICLE OFF*1, then select the ON mode again.
• Repeatedly blinks – The system may be malfunctioning. Have your vehicle checked by a dealer. • Do not attempt to alter this system or add other devices to it. Electrical problems can occur. |
![]() |
1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
*2:Canadian models
Indicator | Name | On/Blinking | Explanation | Message |
![]()
|
Security System Alarm Indicator |
• Blinks when the security system alarm has been set. |
2 Security System Alarm |
— |
|
System Message Indicator |
• Comes on along with a beep when a problem is detected. A system message on the driver information interface appears at the same time. | • While the indicator is on, press the ![]() 2 Accessing contents in the main display
• Refer to the Indicators information in this chapter when a system message appears on the driver information interface. Respond to the message accordingly. • The driver information interface does not return to the normal screen unless the warning is canceled, or the left selector wheel is pressed. |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
ECON Mode Indicator |
• Comes on when the ECON mode is on. |
2 ECON Mode |
![]() |
1:Models without the adaptive damper system
*2:Models with the adaptive damper system
Indicator | Name | On/Blinking | Explanation | Message |
|
SPORT Mode Indicator* |
• Comes on when you press the
SPORT button. |
● The ambient meter remains lit up in red as long as SPORT mode is on.
2 SPORT Mode* |
![]() |
*1:Models without the adaptive damper system
*2:Models with the adaptive damper system
Indicator | Name | On/Blinking | Explanation | Message |
![]() |
Auto Idle Stop Indicator (Green)* | ● Comes on when Auto Idle Stop is in operation. The engine automatically shuts off. |
2 Auto Idle Stop* |
— |
|
Auto Idle Stop System Indicator (Amber)* |
● Comes on when the Auto Idle Stop system has been turned off by the Auto Idle Stop OFF button. |
2 Auto Idle Stop System ON/OFF |
![]() |
● Blinks if there is a problem with the Auto Idle Stop system. | ● Blinks – Have your vehicle checked by a dealer. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber) |
● Comes on if there is a problem with ACC with Low-Speed Follow. | ● Comes on while driving – Have your vehicle checked by a dealer. | ![]() |
● Comes on if the ACC with Low-Speed Follow is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ![]() |
||
● Indicator may come on temporarily when the Maximum Load Limit is exceeded.
● ACC with Low-Speed Follow has been automatically canceled. |
● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit ● Stays on constantly – Have your vehicle checked by a dealer. |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
Adaptive Cruise Control (ACC) with Low-Speed Follow Indicator (White/ Green) | ● Lights up in white when you press the button.
● Lights up in green when you press the RES/+ button or SET/- button. |
2 Adaptive Cruise Control (ACC) with Low Speed Follow |
— |
|
Lane Keeping Assist System (LKAS)
Indicator (Amber) |
● Comes on if there is a problem with the LKAS. | ● Stays on constantly – Have your vehicle checked by a dealer. | ![]() |
|
Lane Keeping Assist System (LKAS)
Indicator (White/ Green) |
● Lights up in white when you press the LKAS button.
● Lights up in green when the LKAS is in operation. |
2 Lane Keeping Assist System (LKAS) |
— |
![]() |
Cruise Mode Indicator (White/ Green) | ● Lights up in white when you change to cruise mode.
● Lights up in green when you have set a speed for cruise control. |
2 To Switch ACC with Low Speed Follow to Cruise Control |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
Safety Support Indicator (Amber) |
● Comes on if there is a problem with RDM, Low Speed Braking Control*, CMBSTM, or the blind spot information system*. | ● Stays on constantly – Have your vehicle checked by a dealer. | ![]() |
● Comes on if the RDM, Low-Speed Braking Control* and CMBSTM are deactivated temporarily after the battery has been disconnected and then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Safety Support Indicator (Amber) |
● Comes on when RDM, Low Speed Braking Control* and/or CMBSTM shuts itself off. | ● Indicator may come on temporarily when passing through an enclosed space, such as a tunnel.
● The area around the radar sensor cover is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth. Indicator may take some time to go off after the radar sensor cover is cleaned. ● Have your vehicle checked by a dealer if the indicator does not go off even after you have cleaned the radar sensor cover. 2 Collision Mitigation Braking SystemTM (CMBSTM) 2 Radar Sensor |
|
● Stays on – The temperature inside the camera is too high.
Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down. 2 Front Sensor Camera |
![]() |
Indicator | Name | On/Blinking | Explanation | Message |
|
Safety Support Indicator (Amber) |
● Comes on when RDM, Low Speed Braking Control* and/or CMBSTM shuts itself off. | ● Stays on – The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
● Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera. 2 Front Sensor Camera |
|
Models with Low-Speed Braking Control
● Comes on when mud, snow, or ice accumulates in the vicinity of sonar. |
● Remove the obstacle in the vicinity of the sonar sensor.
2 Low-Speed Braking Control* 2 Sonar Sensors* |
![]() |
||
Models with blind spot information system
● Comes on when mud, snow, or ice has accumulated in the vicinity of the blind spot information system sensor. |
● Comes on while driving – Something may be interfering with the blind spot information system sensor. Check the vicinity of the blind spot information system sensor and remove any obstacles.
2 Blind spot information System* |
![]() |
||
● Indicator may come on temporarily when the Maximum Load Limit is exceeded. | ● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit |
— |
Indicator | Name | On/Blinking | Explanation | Message |
|
Safety Support Indicator (Green/Gray) |
● Lights up in green when RDM, Low-Speed Braking Control*, CMBSTM, and the blind spot information system* are on.
● Lights up in green and gray when RDM, Low Speed Braking Control*, CMBSTM, or the blind spot information system* is off. ● Lights up in gray when RDM, Low-Speed Braking Control*, CMBSTM, and the blind spot information system* are off. |
2 RDM On and Off 2 CMBSTM On and Off 2 Blind spot information System On and Off 2 System On and Off |
|
FAQ’s
The 2022 Honda Accord features various indicators, including those for speed, fuel levels, navigation, and maintenance alerts.
Yes, the instrument cluster is customizable, allowing drivers to tailor the information displayed to their preferences.
It provides critical information at a glance, reducing distractions and helping drivers stay focused on the road.
Yes, warning lights in the Accord monitor various functions such as tire pressure, engine issues, and collision risks.
It promptly alerts drivers to potential problems or hazards, allowing them to take timely corrective actions.
Yes, by displaying real-time fuel levels, drivers can make more informed decisions about refueling, optimizing fuel efficiency.
Yes, maintenance indicators inform drivers when it’s time for routine service or specific maintenance tasks.
Yes, navigation indicators provide turn-by-turn directions, making it easier for drivers to reach their destinations.
Honda uses high-resolution displays and user-friendly interfaces to ensure the clarity of information presented.
The extent of customization may vary by trim level, but some models offer options for adjusting display themes and colors.
Yes, the Accord’s indicators may include lights to signify when safety features like adaptive cruise control or lane-keeping assist are active.
Yes, the indicators are designed to be visible and legible in various lighting conditions to ensure driver safety and convenience.
Yes, the Accord’s indicators may include lights to signal the status of exterior lights, such as headlights and turn signals.
By providing essential information and alerts, the indicator system helps reduce stress and allows drivers to focus on driving.
Yes, by warning drivers about issues like low tire pressure or engine problems, these indicators can help prevent breakdowns and accidents by enabling timely maintenance and repairs.
Useful Link
View Full PDF: 2022 Honda Accord |Auto User Guide
2022 Honda Accord Head-up Display Instructions