2022 Honda Accord Light Bulbs
When it comes to lighting in cars, the 2022 Honda Accord is a great example of how to be flexible and adaptable. No matter what time of day or night it is, this sedan has a wide range of light bulbs that are meant to make the road ahead more visible and safer. The Accord’s lighting system makes sure that drivers have the right light at the right time. Higher trim levels have modern LED headlights, while lower trim levels have reliable halogen lamps. Each bulb has a specific job to do, like low-beam and high-beam headlights, fog lights, turn signals, brake lights, and even interior dome lights. They all work together to make the Accord a great combination of style, performance, and functionality, lighting the way for drivers and passengers alike.
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
- High beam headlight: LED*
- High beam headlight: 60 W (HB3 for halogen bulb type)*
- Low beam headlight: LED
Models with halogen high-beam headlights
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
All models
The headlight aim is set by the factory and does not need to be adjusted. However, if you regularly carry heavy items in the trunk or tow a trailer*, have the aiming readjusted at a dealer or by a qualified technician.
Models with halogen high-beam headlights
When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
High Beam Headlights
Models with halogen high-beam headlights
Passenger side
- Remove the hose and the holding clip using a flat-tip screwdriver, then remove the upper part of the window washer reserve tank.
- Check the amount of window washer fluid is below the upper part of the window washer reserve tank and remove it.
Both sides
- Check the amount of window washer fluid is below the upper part of the window washer reserve tank and remove it.
- Push the tab to remove the coupler.
- Rotate the old bulb counter-clockwise to remove.
- Insert a new bulb into the headlight assembly and turn it clockwise
- Insert the coupler into the connector of the bulb.
Models with LED high-beam headlights
High beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip. Insert the clip with the pin raised, and push until it is flat.
Low Beam Headlights
Low beam headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
- Fog Lights*
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly. - Parking/Daytime Running Lights
Parking/daytime running lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly. - Front Turn Signal Lights
Front turn signal lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly. - Front Side Marker Lights
Front side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly. - Side Turn Signal/Emergency Indicator Lights*
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Brake Lights, Taillights, Rear Side Marker Lights and Rear Turn Signal Light Bulbs
Brake and rear side marker/taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When replacing, use the following bulbs.
- Brake Light: LED
- Taillight: LED
- Rear Side Marker Light: LED
- Rear Turn Signal Light: 21 W (Amber)
- Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
- Wrap the flat-tip screwdriver with a cloth to prevent scratches.
- Remove the bolts.
- Pull the light assembly out of the rear pillar.
- Turn the socket counter-clockwise and remove it.
- Push and turn the old bulb clockwise and remove it, and insert a new bulb.
Taillight, Brake Light* and Back-Up Light Bulbs
Taillights and brake lights* are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip. Insert the clip with the pin raised, and push until it is flat.
When replacing, use the following bulbs.
- Taillight: LED
- Brake Light*: LED
- Back-Up Light: 16 W
- Remove the holding clips using a flat-tip screwdriver, then pull the lining back.
Driver side
- Turn the socket counter-clockwise and remove it.
- Remove the old bulb and insert a new bulb.
Passenger side
- Turn the socket clockwise and remove it.
- Remove the old bulb and insert a new bulb.
Rear License Plate Light
Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
High-mount Brake Light
The high-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
FAQ
The 2022 Honda Accord typically comes with LED headlights on higher trim levels, while lower trims may have halogen headlights.
You can replace halogen headlights with LED headlights, but it’s essential to ensure compatibility and may require professional installation.
The low-beam headlights typically use an H11 bulb size for halogen headlights and specific LED bulbs for LED headlights.
Consult your owner’s manual for detailed instructions on how to replace the low-beam headlights. Typically, you’ll need to access the bulbs through the engine bay.
The high-beam headlights typically use an H9 bulb size for halogen headlights and specific LED bulbs for LED headlights.
Yes, you can replace high-beam halogen bulbs with LED bulbs, but make sure they are compatible with your Accord’s headlight housing.
The 2022 Honda Accord may come equipped with halogen fog lights on some trim levels.
The fog lights typically use an H11 bulb size for halogen bulbs.
Yes, you can upgrade the fog lights to LED bulbs, but it’s crucial to ensure compatibility with the fog light housing.
The turn signal lights usually use a 7443 or 1157 bulb size for the front and 7440 or 1156 for the rear, depending on the trim level.
Yes, you can switch to LED turn signal bulbs, but ensure they are compatible and may require load resistors to prevent hyperflash.
The brake lights and tail lights typically use a 7443 or 1157 bulb size for the rear.
Yes, you can replace brake and tail light bulbs with LED equivalents, but compatibility and load resistors may be necessary.
To replace interior dome lights, gently pry off the lens cover, remove the old bulbs, and insert the new ones.
The interior dome lights typically use festoon-style bulbs (31mm or 36mm) or specific sizes depending on the trim level.
Useful Link
View Full PDF: 2022 Honda Accord |Auto User Guide
2022 Honda Accord Engine Oil and Fluids Guidelines