2022 Honda Insight Light Bulbs
Introduction
The lighting system on the 2022 Honda Insight was carefully planned and incorporates cutting-edge technology and energy economy. Its light bulbs are meticulously designed to offer the best visibility and safety to both cars and pedestrians. The Insight delivers clear illumination for the road ahead with a harmonic combination of LED and halogen lamps, boosting driving confidence both day and night. Every light bulb in the 2022 Honda Insight is a monument to the car’s dedication to innovation, aesthetics, and dependability, from the recognizable hallmark LED headlights to the painstakingly sculpted taillights.
Light Bulbs
Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Fog Lights
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Front Turn Signal, Parking/Daytime Running and Front Side Marker Lights
Front turn signal, parking/daytime running and front side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Side Turn Signal/Emergency Indicator Lights
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Headlights
The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.
Rear Turn Signal Light Bulbs.
When replacing, use the following bulbs.
Rear Turn Signal Light: 21 W (Amber)
- Use a Phillips-head screwdriver or socket to remove the bolts.
- Pull the light assembly out of the rear pillar.
- Turn the socket counterclockwise and remove it.
- Remove the old bulb and insert a new bulb.
- Slide the light assembly onto the guide on the body.
- Align the pins with the body grommets, then push in until they fully seat.
Brake and Rear Side Marker Lights
Brake and rear side marker Lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Taillights
Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Back-Up Light Bulbs
When replacing, use the following bulbs.
Back-Up Light: 16 W 
- Remove the holding clips using a flat-tip screwdriver, then pull the lining back.
- Turn the socket counterclockwise and remove it.
- Remove the old bulb and insert a new bulb.
Back-Up Light Bulbs
When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.
Insert the clip with the pin raised, and push until it is flat.
Rear License Plate Light
Rear license plate light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
High-Mount Brake Light
High-mount brake light is LED type. Have an authorized Honda dealer inspect and replace the light assembly.
FAQs
All model levels of the 2022 Honda Insight come standard with LED headlights.
Although it is technically possible, it is not advised to switch the LED headlights for halogen ones since this could compromise the lighting performance and safety aspects of the car.
Compared to conventional halogen bulbs, LED headlights typically live longer—often over 20,000 hours.
Using a flat tool, carefully pry off the lid of a burnt-out interior dome light, remove the old bulb, and swap it out for an LED bulb that is compatible. Before starting, make sure the electricity is turned off in the car.
Yes, you may switch to LED bulbs for the fog lights. To replace the fog lights on a 2022 Honda Insight, look for LED bulb kits that fit the fog light housing.
Use bulbs intended for these uses when replacing the bulbs in your brake lights and turn signal lights. To ensure correct access and replacement, refer to the vehicle’s owner’s manual.
The old license plate light bulbs should be taken out and replaced with new LED bulbs by carefully prying off the housing cover with a screwdriver. Be mindful not to harm the wiring or housing.
LED bulb replacements and other aftermarket changes have the potential to void several parts of the car warranty. For advice, it is advisable to speak with your car dealer or the manufacturer of the vehicle.
A wiring or compatibility issue in LED headlights may be the cause of flickering or uneven brightness. Consult a qualified mechanic to identify and fix the issue.
The infotainment system of the car usually has options that can change the headlight beam level. The owner’s handbook should be consulted for detailed instructions.
Avoid putting your fingers directly on the glass surface of an LED bulb when handling it because your skin’s oils can shorten the bulb’s life and affect its performance.
It is typically advised to retain DRLs in their original white color because changing them could possibly be against local laws or have an impact on visibility.
To access various covers, common equipment include a flathead screwdriver, a Phillips-head screwdriver, and maybe a trim removal tool.
Yes, there are LED conversion kits available for a few of the 2022 Honda Insight’s exterior and interior light bulbs. Choose reliable brands that provide compatible alternatives.
Even though some bulb replacements can be carried out by the owner of the vehicle, it is advised to obtain expert assistance, particularly for complex installations or if you are unsure of the procedure, to ensure good operation and safety.
Useful Links
View full PDF: 2022 Honda Insight |Auto User Guide