2024 Honda Passport Owner’s Manual

The 2024 Honda Passport carries on the tradition of being a strong and competent midsize SUV that is perfect for off-road and urban travels. Based on the robust framework of its forerunners, the 2024 model is anticipated to provide the ideal balance of convenience, fashion, and adaptability. It probably has a strong V6 engine, cutting-edge safety systems, and a roomy cabin made of premium materials. The Passport is a vehicle that is ideal for weekend getaways as well as regular commuting because of its spacious cargo area, easy-to-use technologies, and comfortable ride. It is designed for people who want an SUV’s functionality without sacrificing performance or luxury. To obtain the most precise and current information, visit Honda’s official website or get in touch with a nearby dealer.

Gauges and Displays

Gauges
Gauges include the fuel gauge, temperature gauge, and related indicators. They are displayed when the power mode is set to ON.

Fuel Gauge
Displays the amount of fuel left in the fuel tank.

NOTICE
You should refuel when the reading approaches E . Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.

Temperature Gauge
Displays the temperature of the engine coolant.

NOTICE
Driving with the temperature gauge reading in the upper zone can cause serious engine damage. Pull safely to the side of the road and allow engine temperature to return to normal.

Driver Information Interface
The driver information interface displays the speedometer, tachometer, odometer, trip computer, outside temperature, and other gauges. It also displays important messages such as warnings and other helpful information.

Speedometer
Displays your driving speed in mph or km/h. You can set the speedometer and the displayed measurements to read in either mph or km/h.

Tachometer
Shows the number of engine revolutions per minute. You can turn on or off the tachometer display.

Odometer
Shows the total number of miles or kilometres that your vehicle has accumulated.

Outside Temperature
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

Adjusting the outside temperature display
Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading seems incorrect. Use the audio/information screen to correct the temperature. The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h). It may take several minutes for the display to be updated after the temperature reading has stabilized.

Trip Computer
Press the ENTER button to switch between trip computer A and trip computer B.

Distance
Shows the total number of miles or kilometres driven since the last reset. Meters A and B can be used to measure two separate trips. Switch between Distance A and Distance B by pressing the ENTER button.

Resetting distance
To reset the Distance, display it and then press and hold the ENTER button until the Distance is reset to 0.0.

• Average fuel economy (Avg. Fuel)
  Shows the estimated average fuel economy of each Distance in mpg or l/100 km. The display is updated at set intervals. When a Distance is reset, the average fuel economy is also reset. You can change when to reset the average fuel economy.
   
• Instant fuel economy
  Shows the instant fuel economy as a bar graph in mpg or l/100 km.
   
• Range
  Shows the estimated distance you can travel on the remaining fuel. This estimated distance is based on the vehicle’s current fuel economy. The driving range displayed is only an estimate and may differ from the actual distance the vehicle can travel.

Navigation
Display Audio shows you turn-by-turn directions to your destination. Turn-by-turn directions will be shown on the driver information interface only when your Android phone is connected to Android AutoTM. You can select whether to have the turn-by-turn display come on or not during the route guidance.

Models with navigation system
When the navigation system is not providing driving guidance, an image of a compass appears in the driver information interface

Maintenance
Shows the current condition of the tire pressure and the remaining oil life.

• Tire Pressure
  Shows the tire pressure of each tire.
• Oil Life
  Shows the remaining oil life and Maintenance MinderTM.

AWD Torque
The indicators on the display show the amount of torque being transferred to the right front, left front, right rear, and left rear wheels.

Phone
Shows the current phone information.

Units
Enables you to set the speedometer and the displayed measurements to read in either mph or km/h. Press and hold the ENTER button. Each time you do this, the unit will change from mph to km/h or vice versa. After this, a confirmation screen will appear for a few seconds.

Now Playing
Shows the current audio information.

Locking and Unlocking the Doors

Key Types and Functions

This vehicle comes with the following keys:
Use the keys to start and stop the engine, and Keyless Remote to lock and unlock all the doors and tailgate. All the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
Follow the advice below to prevent damage to the keys:

• Do not leave the keys in direct sunlight, or in locations with high temperature or high humidity.
• Do not drop the keys or set heavy objects on them.
• Keep the keys away from liquids, dust and sand.
• Do not take the keys apart except for replacing the battery.

If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer. You can remotely start the engine using the keyless remote.

Built-in Key
The built-in key can lock/unlock the doors when the keyless remote battery becomes weak and the power door lock/unlock operation is disabled. To remove the built-in key, slide the release knob and then pull out the key. To reinstall the built-in key, push it into the keyless remote until it clicks.

Key Number Tag
Contains a number that you will need if you purchase a replacement key. Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer. If you lose your key and you cannot start the engine, contact a dealer.

Low Keyless Remote Signal Strength
The vehicle transmits radio waves to locate the keyless remote when locking/unlocking the doors and tailgate or to start the engine.
In the following cases, locking/unlocking the doors and tailgate, or starting the engine may be inhibited or operation may be unstable:

• Strong radio waves are being transmitted by nearby equipment.
• You are carrying the keyless remote together with telecommunications equipment, laptop computers, cell phones, or wireless devices.
• A metallic object is touching or covering the keyless remote.

Communication between the keyless remote and the vehicle consumes the keyless remote’s battery. Battery life is about two years, but this varies depending on regularity of use. The battery is consumed whenever the keyless remote is receiving strong radio waves. Avoid placing it near electrical appliances such as televisions and personal computers.

Using the Keyless Access System
When you carry the keyless remote, you can lock/unlock the doors and the tailgate. You can lock/unlock the doors and the tailgate within a radius of about 32 inches (80 cm) of the outside door handle or tailgate outer handle.

1Locking/Unlocking the Doors from the Outside
If the interior light switch is in the door-activated position, the interior lights come on when you unlock the doors and tailgate.

• No doors opened: The lights fade out after 30 seconds.
• Doors and tailgate relocked: The lights go off immediately.

Using the Keyless Access System
If you do not open a door or the tailgate within 30 seconds of unlocking the vehicle with the keyless access system, the doors and tailgate will automatically relock. You can lock or unlock doors using the keyless access system only when the power mode is in VEHICLE OFF.

Locking the doors and tailgate
Press the door lock button on the front door or the tailgate.

• Some exterior lights flash; the beeper sounds; all the doors and tailgate lock; and the security system sets.
  • Do not leave the keyless remote in the vehicle when you get out. Carry it with you.
  • Even if you are not carrying the keyless remote, you can lock/unlock the doors and tailgate while someone else with the remote is within range.
  • The door may be unlocked if the door handle is covered with water in heavy rain or in a car wash if the keyless remote is within range.
  • If you grip a door handle wearing gloves, the door sensor may be slow to respond or may not respond by unlocking the doors.
  • After locking the door, you have up to 2 seconds during which you can pull the door handle to confirm whether the door is locked. If you need to unlock the door immediately after locking it, wait at least 2 seconds before gripping the handle, otherwise, the door will not unlock.
  • The door might not open if you pull it immediately after gripping the door handle. Grip the handle again and confirm that the door is unlocked before pulling the handle.
  • Even within the 32-inch (80 cm) radius, you may not be able to lock/unlock the doors with the keyless remote if it is above or below the outside handle.
  • The keyless remote may not operate if it is too close to the door and door glass.

Unlocking the doors and tailgate

• Grab the driver’s door handle:
  • The driver’s door unlocks.
  • Some exterior lights flash twice and the beeper sounds twice.
• Grab the front passenger’s door handle:
  • All doors and the tailgate unlock.
  • Some exterior lights flash twice and the beeper sounds twice.
• Press the tailgate outer handle:
  • The tailgate unlocks and opens.
  • Some exterior lights flash twice and the beeper sounds twice.

Locking the doors and tailgate (Walk away auto lock®)
When you walk away from the vehicle with all doors and tailgate closed while carrying the keyless remote, the doors will automatically lock.
The auto lock function activates when all doors and tailgate are closed, and the keyless remote is within about 5 5-foot (1.5 m) radius of the outside door handle or tailgate outer handle. Exit the vehicle while carrying a keyless remote close the door(s) and tailgate.

1. While within about 5 feet (1.5 m) radius of the vehicle.
   • The beeper sounds; the auto-lock function will be activated.
2. Carry the keyless remote beyond about 5 feet (1.5 m) from the vehicle and remain outside this range for 2 or more seconds.
   • Some exterior lights flash; the beeper sounds; all doors and tailgates will then lock.

Locking the doors and tailgate (Walk away auto lock®)
The auto lock function is set to OFF as the factory default setting. The auto lock function can be set to ON using the audio/information screen. Turning ON the auto-lock function using the audio/information screen, shall only activate the function in the remote transmitter that was used to unlock the driver’s door. After the auto-lock function has been activated, when you stay within the locking/unlocking operation range, the indicator on the keyless remote will continue to flash until the doors are locked. When you stay beside the vehicle within the operation range, the doors will automatically lock approximately 30 seconds after the auto-lock function activates beeper sounds. When you open a door after the auto-lock function activates beeper sounds, the auto-lock function will be delayed until all doors and tailgates are closed.

Under the following circumstances, the auto-lock function will not activate:

• The remote is inside the vehicle.
  • The buzzer will not sound.
• The remote is taken out of its operational range before all the doors are closed.
  • The buzzer will sound.

To temporarily deactivate the function:

1. Set the power mode to OFF.
2. Open the driver’s door.
3. Using the master door lock switch, operate the lock as follows:
   • The beeper sounds, and the function is deactivated.

To restore the function:

• Set the power mode to ON.
• Lock the vehicle without using the auto lock function.
• With the keyless remote on you, move out of the auto lock function operation range.
• Open any door.

Locking the doors and tailgate (Walk away auto lock®)
If equipped, the user must wait until the power tailgate fully closes before the auto-lock function will be activated. The auto lock function does not operate when any of the following conditions are met.

• The keyless remote is inside the vehicle.
• A door or the hood is not closed.
• The power mode is set to any mode other than OFF.
• The keyless remote is not located within a radius of about 5 feet (1.5 m) from the vehicle when you get out of the vehicle and close the doors.

Auto lock function operation stops beeper After the auto-lock function has been activated, the auto-lock operation stops beeper sounds for approximately two seconds in the following cases.

• The keyless remote is put inside the vehicle through a window.
• You are located too close to the vehicle.
• The keyless remote is put inside the tailgate.

If the warning beeper sounds, check that you are carrying the keyless remote. Then, open/close a door and confirm the auto lock activation beeper sounds once.

FAQ

Useful Link

2024 Honda Odyssey Owner’s Manual

2023 Honda Passport User Guide