2022 Honda Civic Tire Pressure Monitoring System User Manual
The tire pressure monitoring system in the Honda Civic Hatchback 2022 helps drivers maintain proper tire pressure and avoid accidents caused by under-inflated tires. Each tire is equipped with a sensor that sends alerts to the driver if the pressure drops below a certain level. This guide will answer common questions about the tire pressure monitoring system, including its operation, advantages, and recommended maintenance tips. If the low tire pressure light Honda Civic is illuminated, it indicates that one or more of the tires has low air pressure, and you should check and adjust the tire pressure accordingly.
Tire Pressure Monitoring System
Tire Pressure Monitoring System (TPMS) – Required Federal Explanation
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale
when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.
The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
Blind Spot Information System
When the system detects vehicles approaching from behind in adjacent lanes, the appropriate indicator comes on, providing assistance when you change lanes.
How the System works
The system activates when your vehicle is moving forward at about 20 mph (32 km/h) or above.
Alert zone range
A: Approx. 1.6 ~ 10 feet (0.5 ~ 3 meters) from vehicle side.
B: Approx. 10 feet (3 meters) from rear bumper.
C: Approx. 10 ~ 82 feet (3 ~ 25 meters) behind from rear bumper. (The faster the approaching vehicle, the further away it will be detected.) The initially set alert zone is alert zone 1. Over time, after the vehicle has been driven on straight roads with traffic and roadside objects, the system will adapt and expand the alert zone (alert zone 1 and 2).
Important Safety Reminder
Like all assistance systems, the blind spot information system has limitations. Always look in your mirrors, to either side of your vehicle, and behind you for other vehicles before changing lanes. Overreliance on the blind spot information system may result in a collision.
Have your vehicle checked by a dealer in the following situations:
- The rear bumper or area around the radar sensors is strongly impacted.
- The indicator does not come on even if a vehicle in the alert zone should have been detected.
- The rear bumper or any system components need to be repaired.
If the rear bumper or any system components are repaired, the system will revert to alert zone 1 only until it is able to adapt and expand to alert zone 1 and 2.
When the system detects a vehicle
Blind spot information system alert indicator: Located on the outside rearview mirror on both sides.
Comes on when:
- A vehicle approaches you from behind to overtake you at a speed difference of no more than about 31 mph (50 km/h).
- You pass a vehicle at a speed difference of no more than about 12 mph (20 km/h).
Blinks and a beeper sounds when:
You use the turn signal lever to signal a turn in the direction of the detected vehicle while the blind spot information system alert indicator is on.
- The beeper sounds three times. For proper blind spot information system operation:
- Always keep the rear bumper and area around the radar sensors clean.
- Do not cover the rear bumper corner area with labels or stickers of any kind.
The system is for your convenience only. Even if an object is within the alert zone, the following situations may occur:
- The blind spot information system alert indicator does not come on and the message Blind spot information system not available appears on the driver information interface.
- The blind spot information system alert indicator may come on even with the message displayed.
FAQ
TPMS is a safety feature that monitors the air pressure in your vehicle’s tires and alerts you if the pressure drops below a certain threshold.
Yes, TPMS is a standard feature in most modern vehicles, including the 2022 Honda Civic Hatchback.
The TPMS uses sensors in each tire to measure the tire pressure. If the pressure drops below a specified level, it triggers a warning on the dashboard.
If the TPMS warning light comes on, it indicates that the tire pressure is low. Check the tire pressure using a tire gauge and inflate the tires to the recommended levels.
It’s a good practice to check your tire pressure at least once a month and before long trips.
The recommended tire pressure can usually be found in the owner’s manual or on a sticker inside the driver’s side door jamb.
Yes, temperature changes can impact tire pressure, potentially causing the TPMS warning light to illuminate. Cold weather can lead to lower tire pressure.
A flashing TPMS light could indicate a malfunction in the system. It’s recommended to have your vehicle inspected by a professional.
Yes, you can often reset the TPMS warning light after inflating the tires to the correct pressure. The process can usually be found in the owner’s manual.
If you use snow tires, you might need to have the TPMS sensors recalibrated to ensure accurate readings.
Some vehicles have sensors for the spare tire as well, but not all. Check the owner’s manual to see if your Civic Hatchback includes a sensor for the spare tire.
Driving with low tire pressure can affect handling, fuel efficiency, and tire wear. It’s important to address it promptly.
While it’s possible to replace TPMS sensors yourself, it’s recommended to have a professional do it to ensure proper installation.
TPMS sensors don’t require regular maintenance, but if you experience issues or the system malfunctions, you should have it inspected.
The process for resetting the TPMS indicator can vary. Consult the owner’s manual for specific instructions.
How to check tire pressure on Honda Civic 2022?
To check honda civic 2022 tire pressure, remove the valve caps, use a tire pressure gauge to measure the pressure at each tire’s valve stem, and compare it to the recommended PSI found in the owner’s manual or on the driver’s side door jamb. Inflate or deflate the tires as needed to match the recommended pressure.
What is the recommended tire pressure for a 2022 Honda Civic Sport?
The recommended 2022 Honda Civic Sport tire pressure typically ranges between 32 to 35 PSI (pounds per square inch) for all four tires. However, it’s essential to refer to the owner’s manual or the label inside the driver’s door jamb for the precise tire pressure specifications, as they can vary depending on the specific trim level and tire size.
How can I view the 2022 Honda Civic tire pressure display?
To view the tire pressure display on a 2022 Honda Civic, press the “MENU” or “INFO” button on the steering wheel, navigate to “Tire Pressure” in the vehicle information menu, and select it to see the current tire pressure readings for all four tires in PSI.
Useful Link
View Full User Guide: Honda Civic Hatchback 2022 User Manual | Autouser Guide
Honda Civic Hatchback 2022 Agile Handling Assist User Manual