Honda Civic Sedan 2023 Indicators
Indicators are the visual cues that help you figure out what’s going on in the 2023 Honda Civic Sedan. These unspoken messages go beyond words. They tell the driver a lot about the state of the car and keep them in touch with their surroundings. From the moment you turn on the turn signal indicators to smoothly tell other drivers what you want to do to the moment the “Check Engine” light glows in a way that tells you something about the health of the engine, these lights are a symphony of information that is part of the driving experience. The “TPMS” light carefully checks the tire pressure, and the “Seat Belt” light is always there to remember you to be safe. The high beam sign lights up the road with its dance, and the “ABS” light shows that the car is stable. With each small hint, these indicators weave together a picture that helps the driver avoid possible dangers and make decisions about maintenance. When you get into the 2023 Honda Civic Sedan, pay attention to the silent conversation going on in front of you. The indicators are the eloquent voices of safety, usefulness, and awareness.
Indicators
Indicators come on/blink depending on the condition of the vehicle. Messages may display on the driver information interface at the same time. Please take the appropriate action outlined in the message, such as contacting a dealer.
Parking Brake and Brake System Indicator (Red)
Parking Brake and Brake System Indicator (Amber)
Automatic Brake Hold System Indicator
Automatic Brake Hold Indicator
Malfunction Indicator Lamp
Charging System Indicator
Shift Position Indicator*
M (7-speed manual shift mode) Indicator/Shift Indicator*
Transmission System Indicator*
Shift Up Indicator*
Shift Down Indicator*
Seat Belt Reminder Indicator
Low Fuel Indicator
Anti-lock Brake System (ABS) Indicator
Supplemental Restraint System Indicator
Electric Power Steering (EPS) System Indicator
Vehicle Stability AssistTM (VSA®) System Indicator
Vehicle Stability AssistTM (VSA®) OFF Indicator
Low Tire Pressure/TPMS Indicator*
Turn Signal and Hazard Warning Indicators
Lights On Indicator
High Beam Indicator
Auto High-Beam Indicator
Fog Light Indicator*
System Message Indicator
ECON Mode Indicator*
NORMAL Mode Indicator*
SPORT Mode Indicator*
INDIVIDUAL Mode Indicator*
Low Temperature Indicator*
Cruise Mode Indicator (White/Green)
Adaptive Cruise Control (ACC) with Low Speed Follow* Interval Indicator*
Auto Idle Stop Off Indicator
Auto Idle Stop Suspend Indicator
Auto Idle Stop System Indicator (Amber)
Auto Idle Stop Indicator (Green)
Immobilizer System Indicator- Security System Alarm Indicator
Adaptive Cruise Control (ACC) with Low Speed Follow* Indicator (Amber)
Adaptive Cruise Control (ACC) with Low Speed Follow* Indicator (White/Green)
Lane Keeping Assist System (LKAS) Indicator (Amber)
Lane Keeping Assist System (LKAS) Indicator (White/Green)
Safety Support Indicator (Amber)
Safety Support Indicator (Green/Gray)
*1: When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the engine has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To resolve the issue, follow the instructions in the owner’s manual.
* 2: Models without drive mode switch
* 3: Models with drive mode switch
* Not available on all models
| Indicator | Name | On/Blinking | Explanation |
 |
Parking Brake and Brake System Indicator (Red) | ● Comes on when the parking brake is applied, and goes off when it is released. | ● The beeper sounds and the indicator comes on if you drive with the parking brake applied.
● Comes on for about 30 seconds when you apply the electric parking brake while the power mode is in ACCESSORY or VEHICLE OFF, then goes off. ● Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is applied, then goes off. |
| • Comes on when the brake fluid level is low. | • Comes on while driving – Make sure the parking brake is released. Stop in a safe place and check the brake fluid level.
2 What to do when the indicator comes on while driving |
| Indicator | Name | On/Blinking | Explanation |
|
|
Parking Brake and Brake System Indicator (Red) |
● Comes on if there is a problem with the brake system. |
1.5 L engine models with continuously variable transmission
● Comes on along with the Parking Brake and Brake System Indicator (amber) – Immediately stop in a safe place. Contact a dealer for repair. The brake pedal becomes harder to operate. Depress the pedal further than you normally do. 2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On All models ● Comes on along with the ABS indicator – Have your vehicle checked by a dealer. 2 If the Brake System Indicator (Red) Comes On or Blinks ● Blinks and the Parking Brake and Brake System Indicator (amber) comes on at the same time – There is a problem with the electric parking brake system. The parking brake may not be set. Avoid using the parking brake and have your vehicle checked by a dealer immediately. 2 If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On P. 739 |
| Indicator | Name | On/Blinking | Explanation |
 |
Parking Brake and Brake System Indicator (Amber) | ● Comes on if there is a problem with a system related to braking other than the conventional brake system. | ● Comes on while driving – Have your vehicle checked by a dealer.
● With this indicator on, your vehicle still has normal braking ability. |
| ● Comes on if there is a problem with the electric parking brake system and/or the automatic brake hold system. | ● Stays on constantly – Avoid using the parking brake and have your vehicle checked by a dealer immediately. | ||
 |
Automatic Brake Hold System Indicator | ● Comes on when the automatic brake hold system is on. | 2 Automatic Brake Hold |
 |
Automatic Brake Hold Indicator | ● Comes on when the automatic brake hold is activated. | 2 Automatic Brake Hold |
| Indicator | Name | On/Blinking | Explanation |
|
|
Malfunction Indicator Lamp |
● After you have set the power mode to ON, the vehicle performs system checks. However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off. | ● Readiness codes are part of the on-board diagnostics for the emissions control systems.
2 Testing of Readiness Codes |
| ● Comes on if there is a problem with the emissions control systems.
● Blinks when a misfire in the engine’s cylinders is detected. |
2 If the Malfunction Indicator Lamp Comes On or Blinks |
||
|
|
Charging System Indicator |
● Comes on when there is a problem with the charging system. | ● Stop in a safe place and contact a dealer immediately.
2 Checking the Battery 2 If the Charging System Indicator Comes On |
 |
Shift Position Indicator* |
● Indicates the current shift position. |
2 Shifting |
 |
M (7-speed manual shift mode) Indicator/Shift Indicator* | ● Comes on when the 7-speed manual shift mode is applied. |
2 7-Speed Manual Shift Mode |
| Indicator | Name | On/Blinking | Explanation |
|
|
Transmission System Indicator* |
● Blinks if the transmission system has a problem. | ● Blinks while driving – Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately. |
| ● Blinks if the transmission system has a problem and the performance of the vehicle is reduced. | ● Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately. | ||
| Models with paddle shifter
● Blinks if the transmission system has a problem and the paddle shifters cannot be used. |
● Have your vehicle checked by a dealer immediately. | ||
|
Shift Up Indicator* | ● Comes on when shifting up is recommended. | 2 Shift Up/Down Indicators |
|
Shift Down Indicator* | ● Comes on when shifting down is recommended. | 2 Shift Up/Down Indicators |
| Indicator | Name | On/Blinking | Explanation |
|
|
Seat Belt Reminder Indicator |
● Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, then the indicator comes on.
● If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later. ● Comes on for a while when the rear seat belt is unfastened while the power mode in ON. ● Blinks while driving if you and/or any passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals. |
● The beeper stops and the indicator goes off when you and the passengers fasten their seat belts.
● Stays on after you and/or the passengers have fastened the seat belt(s) – A detection error may have occurred in the sensor. Have your vehicle checked by a dealer. 2 Seat Belt Reminder |
| Indicator | Name | On/Blinking | Explanation |
|
|
Low Fuel Indicator |
● Comes on when the fuel reserve is running low (approximately 1.8 U.S. gal/7.0 Liter left). | ● Comes on – Refuel your vehicle as soon as possible. |
| ● Blinks if there is a problem with the fuel gauge. | ● Blinks – Have your vehicle checked by a dealer. | ||
|
|
Anti-lock Brake System (ABS) Indicator |
● Comes on if there is a problem with the ABS. | ● Stays on constantly – Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
2 Anti-lock Brake System (ABS) |
|
|
Supplemental Restraint System Indicator |
● Comes on if a problem with any of the following is detected:
– Supplemental Restraint System – Side airbag system – Side curtain airbag system – Seat belt tensioner |
● Stays on constantly – Have your vehicle checked by a dealer. |
| Indicator | Name | On/Blinking | Explanation |
|
|
Electric Power Steering (EPS) System Indicator |
• Comes on if there is a problem with the EPS system. | • Stays on constantly – Have your vehicle checked by a dealer.
• Do not drive displays on the driver information interface – Immediately stop in a safe place and contact a dealer. 2 If the Electric Power Steering (EPS) System Indicator Comes On |
|
|
Vehicle Stability AssistTM (VSA®) System Indicator |
● Blinks when VSA® is active. | — |
| ● Comes on if there is a problem with the VSA® system, brake assist system, agile handling assist, starting assist brake function* or hill start assist system. | ● Stays on constantly – Have your vehicle checked by a dealer.
2 Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System |
||
| ● Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ||
|
|
Vehicle Stability AssistTM (VSA®) OFF Indicator |
● Comes on when you partially disable VSA®. | 2 VSA® On and Off |
| Models with A-type meter
● Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, then re-connected. |
● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. |
| Indicator | Name | On/Blinking | Explanation |
|
|
Low Tire Pressure/ TPMS Indicator* |
● May come on briefly if the power mode is set to ON and the vehicle is not moved within 45 seconds, to indicate the calibration process is not yet complete.
● Comes on and stays on when: – One or more tires’ pressures are determined to be significantly low. – The system has not been calibrated. |
● Comes on while driving – Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
● Stays on after the tires are inflated to the recommended pressures – The system needs to be calibrated. 2 TPMS Calibration |
| ● Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a compact spare tire* is temporarily installed. | ● Blinks and remains on – Have your vehicle checked by a dealer. If the vehicle is fitted with a compact spare tire*, get your regular tire repaired or replaced and put back on your vehicle as soon as you can. | ||
| ● Comes on if the TPMS is deactivated temporarily after the battery has been disconnected, then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. |
| Indicator | Name | On/Blinking | Explanation |
 |
Turn Signal and Hazard Warning Indicators | • Blinks when you operate the turn signal lever.
• Blinks along with all turn signals when you press the hazard warning button. |
• Does not blink or blinks rapidly
2 Replacing Light Bulbs |
 |
Lights On Indicator | • Comes on when the parking, tail, and other external lights are on. | 2 Light Switches |
 |
High Beam Indicator | • Comes on when the high beam headlights are on. | — |
 |
Auto High-Beam Indicator | • Comes on when all the operating conditions of the auto high-beam are met. | 2 Auto High-Beam |
 |
Fog Light Indicator* | • Comes on when the fog lights are on. | 2 Fog Lights* |
| Indicator | Name | On/Blinking | Explanation |
|
|
System Message Indicator |
• Comes on along with a beep when a problem is detected. A system message on the driver information interface appears at the same time. |
● Refer to the Indicators information in this chapter when a system message appears on the driver information interface. Take the appropriate action for the message.
Models with A-type meter ● While the indicator is on, press the 2 Accessing contents in the display ● The driver information interface will not return to the normal screen unless the warning is canceled, or the Models with B-type meter ● While the indicator is on, roll the right selector wheel to see the message again. 2 Switching the Display ● The driver information interface will not return to the normal screen unless the warning is canceled, or the right selector wheel is rolled. |
(home) button, and select Warnings to see the message again.| Indicator | Name | On/Blinking | Explanation |
|
|
ECON Mode Indicator* |
Models without drive mode switch
● Comes on when the ECON mode is on. Models with drive mode switch ● Comes on when you set the drive mode to ECON. |
2 ECON Button* 2 Drive Mode Switch* |
 |
NORMAL Mode Indicator* | ● Comes on when you set the drive mode to
NORMAL. |
2 Drive Mode Switch* |
|
|
SPORT Mode Indicator* |
● Comes on when you set the drive mode to
SPORT. |
Models with A-type meter
● The ambient meter remains lit up in red as long as SPORT mode is selected. Models with B-type meter ● The ambient meter* goes off and gauges in the instrument panel lit up in red as long as SPORT mode is selected. 2 Drive Mode Switch* |
 |
INDIVIDUAL
Mode Indicator* |
● Comes on when you set the drive mode to
INDIVIDUAL. |
2 Drive Mode Switch* |
|
|
Low Temperature Indicator* |
● Comes on when the engine coolant temperature is low. | ● If the indicator stays on after the engine has reached normal operating temperature, there may be a problem with the temperature sensors. Have your vehicle inspected by a dealer. |
| Indicator | Name | On/Blinking | Explanation |
|
Models with A-type meter Indicator |
• Blinks if the immobilizer system cannot recognize the key information. | • Blinks – You cannot start the engine. Set the power mode to VEHICLE OFF, then select the ON mode again. | |
 |
Canadian models | ||
|
Models with B-type meter Indicator |
Immobilizer System Indicator |
Depress and hold the brake pedal before setting
the power mode to ON. • Repeatedly blinks – The system may be malfunctioning. Have your vehicle checked by a dealer. • Do not attempt to alter this system or add other devices to it. Electrical problems can occur. |
|
|
|
|||
|
Models with |
• Blinks when the security system alarm has been set. | ||
| A-type meter | |||
Indicator |
|||
|
Models with |
Security System Alarm Indicator |
2 Security System Alarm |
|
| B-type meter | |||
|
|
| Indicator | Name | On/Blinking | Explanation |
 |
Auto Idle Stop OFF Indicator |
● Comes on when the Auto Idle Stop system has been turned off by the Auto Idle Stop OFF button. |
2 Auto Idle Stop System ON/OFF |
 |
Auto Idle Stop System Indicator (Amber) | ● Blinks if there is a problem with the Auto Idle Stop system. | ● Blinks – Have your vehicle checked by a dealer. |
 |
Auto Idle Stop Indicator (Green) | ● Comes on when Auto Idle Stop is in operation. The engine automatically shuts off. |
2 Auto Idle Stop |
| Indicator | Name | On/Blinking | Explanation |
|
|
Auto Idle Stop Suspend Indicator |
● Comes on while Auto Idle Stop is temporarily suspended in the following situations. |
— |
| Continuously variable transmission models
– Brake pedal is not fully pressed |
● Depress the brake pedal firmly. | ||
| Continuously variable transmission models
– The transmission is in a position other than (D |
2 Auto Idle Stop |
||
| – System charging is prioritized | |||
| – Climate control system is prioritized | |||
| – Engine coolant temperature is not in operating range | |||
| – SPORT mode* is selected. |
2 Auto Idle Stop 2 Drive Mode Switch* |
||
| – The battery temperature is too low.
– Auto Idle Stop does not activate for some reason. |
|||
|
— |
● If you press and hold the Auto Idle Stop OFF button, you can select whether to display the status messages or not. |
| Indicator | Name | On/Blinking | Explanation |
|
|
Adaptive Cruise Control (ACC) with Low Speed Follow* Indicator (Amber) |
● Comes on if there is a problem with ACC with Low Speed Follow*. | ● Comes on while driving – Have your vehicle checked by a dealer. |
| ● Comes on if the ACC with Low Speed Follow* is deactivated temporarily after the battery has been disconnected, then re- connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. | ||
| ● Indicator may come on temporarily when the Maximum Load Limit is exceeded.
● ACC with Low Speed Follow* has been automatically canceled. |
● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit ● Stays on constantly – Have your vehicle checked by a dealer. |
||
|
Adaptive Cruise Control (ACC) with Low Speed Follow* Indicator (White/Green) | ● Lights up in white when you press the button.
● Lights up in green when you press the RES/ +/SET/− switch up or down. |
2 Adaptive Cruise Control (ACC) with Low Speed Follow* 2 Adaptive Cruise Control (ACC)* |
| Indicator | Name | On/Blinking | Explanation |
|
|
Lane Keeping Assist System (LKAS) Indicator (Amber) |
● Comes on if there is a problem with the LKAS. | ● Stays on constantly – Have your vehicle checked by a dealer. |
| ● Indicator may come on temporarily when the Maximum Load Limit is exceeded. | ● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit ● Stays on constantly – Have your vehicle checked by a dealer. |
||
|
Lane Keeping Assist System (LKAS) Indicator (White/Green) | ● Lights up in white when you press the LKAS button.
● Lights up in green when the LKAS is in operation. |
2 Lane Keeping Assist System (LKAS) |
|
Cruise Mode Indicator (White/Green) | ● Lights up in white when you change to cruise mode.
● Lights up in green when you have set a speed for cruise control. |
2 To Switch ACC with Low Speed Follow to Cruise Control 2 To Switch ACC to Cruise Control |
|
|
Adaptive Cruise Control (ACC) with Low Speed Follow* Interval Indicator* |
● Comes on when Adaptive Cruise Control (ACC) with Low Speed Follow* indicator comes on. | ● Each time you press the Interval button, the following interval (the interval behind a vehicle detected ahead of you) setting cycles through extra long, long, middle, and short following intervals.
2 To Set or Change Following-interval |
| Indicator | Name | On/Blinking | Explanation |
|
|
Safety Support Indicator (Amber) |
● Comes on if there is a problem with Road Departure Mitigation system, CMBSTM, Low Speed Braking Control* or blind spot information system*. | ● Stays on constantly – Have your vehicle checked by a dealer. |
| ● Indicator may come on temporarily when the Maximum Load Limit is exceeded. | ● Make sure the total load is within the Maximum Load Limit.
2 Maximum Load Limit ● Stays on constantly – Have your vehicle checked by a dealer. |
||
| ● Comes on if the Road Departure Mitigation system, CMBSTM and Low Speed Braking Control* are deactivated temporarily after the battery has been disconnected and then re-connected. | ● Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer. |
| Indicator | Name | On/Blinking | Explanation |
|
|
Safety Support Indicator (Amber) |
● Comes on when the Road Departure Mitigation system and/or CMBSTM shuts itself off. | ● Stays on – The temperature inside the camera is too high.
Use the climate control system to cool down the camera. The system activates when the temperature inside the camera cools down. 2 Front Wide View Camera |
| ● Stays on – The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
● Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera. 2 Front Wide View Camera ● It may come on when the ambient conditions are dark, such as when driving in a tunnel, or at night, dawn, or dusk. |
| Indicator | Name | On/Blinking | Explanation |
|
|
Safety Support Indicator (Amber) |
Models with Low Speed Braking Control
● Comes on when mud, snow, or ice accumulates in the vicinity of the sonar sensor. |
● Remove the obstacle in the vicinity of the sonar sensor.
2 Low Speed Braking Control* |
| Models with blind spot information system
● Comes on when mud, snow, or ice accumulates in the vicinity of the blind spot information system sensor. ● Comes on when the temperature of the blind spot information system sensor is high. |
● Comes on while driving – Something may be interfering with the blind spot information system sensor. Check the vicinity of the blind spot information system sensor and remove any obstacles.
● The system will return to normal when the temperature cools down. 2 Blind Spot Information System* |
||
|
|
Safety Support Indicator (Green/ Gray) | ● Lights up in green when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control* and blind spot information system* are on.
● Lights up in green and gray when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control*, blind spot information system* or any two or three of these systems are off. ● Lights up in gray when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control* and blind spot information system* are off. |
2 Road Departure Mitigation system On and Off
2 CMBSTM On and Off 2 Blind Spot Information System On and Off 2 System On and Off |
FAQ
Answer: Indicators are visual cues and lights that communicate information about various vehicle functions and conditions.
Answer: Turn signal indicators inform other drivers of your intention to change lanes or make a turn.
Answer: The turn signal indicators are typically activated by pushing the turn signal stalk up or down, depending on the desired direction.
Answer: The turn signal indicators usually cancel automatically after completing the turn or lane change. If not, you can often manually cancel them by returning the stalk to the neutral position.
Answer: The “Check Engine” indicator alerts the driver to potential issues with the vehicle’s engine or emissions system that need attention.
Answer: The “TPMS” indicator stands for Tire Pressure Monitoring System, and it alerts the driver when tire pressure is too low.
Answer: The fuel level indicator shows the amount of fuel remaining in the gas tank, helping the driver plan refueling stops.
Answer: The “Seat Belt” indicator reminds occupants to fasten their seat belts for safety.
Answer: The high beam indicator illuminates when you activate the vehicle’s high beam headlights.
Answer: The “ABS” indicator stands for Anti-Lock Braking System. It may illuminate briefly during startup but should turn off once the system is initialized.
Answer: The “Low Fuel” indicator alerts the driver when the fuel level is critically low, reminding them to refuel soon.
Answer: The “Oil Pressure” indicator alerts the driver if the engine’s oil pressure is lower than normal, indicating potential engine issues.
Answer: Yes, indicators like the “Maintenance Required” light can remind the driver of scheduled maintenance, preventing potential problems.
Answer: The temperature indicator shows the engine’s operating temperature. If it becomes too high, it can indicate a potential overheating issue.
Answer: Indicators provide essential information about vehicle status, conditions, and potential issues, enhancing driver awareness and promoting safe driving practices.
Useful Links:
View Full PDF: Honda Civic Sedan 2023 |Auto User Guide
Honda Civic Sedan 2023 Seat Belts User Instructions