Honda HR-V 2019 Cruise Control User Manual
Introduction
The 2019 Honda HR-V exemplifies sophistication and practicality, and the inclusion of Cruise Control is evidence of its dedication to enhancing the driving experience. Cruise Control is an intelligent technology that allows you to maintain a predetermined speed while driving on the interstate, allowing you to effortlessly glide along the open road without pressing the accelerator pedal constantly. Once you reach your desired speed, you can activate the Cruise Control system by using the intuitive controls on the steering wheel.
Engineers from Honda have gone the extra mile to ensure your safety on the road. The 2019 HR-V’s Cruise Control system is designed to be responsive and user-friendly. If adjustments are necessary, you can easily increase or decrease your pace using the buttons conveniently located on the steering wheel. In addition, you can disengage the system with a simple tap of the brake or by tapping the cancel button, giving you complete control at all times. So, whether you’re embarking on a cross-country road excursion or navigating your daily commute, the 2019 Honda HR-V’s Cruise Control is here to make driving more enjoyable and less stressful.
Cruise Control
Maintains a constant vehicle speed without having to keep your foot on the accelerator. Use cruise control on freeways or open roads where you can travel at a constant speed with little acceleration or deceleration.
When to use
- Vehicle speed for cruise control: Desired speed in a range above roughly 25 mph (40 km/h) ~
Shift positions for cruise control: In (D or (S
Always keep sufficient distance between you and the vehicle in front of you.
WARNING
Improper use of the cruise control can lead to a crash.
Use the cruise control only when traveling on open highways in good weather.
It may not be possible to maintain a constant speed when driving uphill or downhill.
When not using cruise control:
Turn off cruise control by pressing the CRUISE button.
While in ECON mode, it may take relatively more time to accelerate to maintain the set speed.
To Set the Vehicle Speed
Take your foot off the pedal and press the –/SET button when you reach the desired speed.
The moment you release the –/SET button, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
To Adjust the Vehicle Speed
Increase or decrease the vehicle speed using the RES/+ or –/SET buttons on the steering wheel.
- Each time you press the button, the vehicle speed is increased or decreased by about 1 mph (1.6 km/h).
If you keep the button pressed, the vehicle speed increases or decreases until you release it. This speed is then set.
To Cancel
To cancel cruise control, do any of the following:
- Press the CANCEL button.
Press the CRUISE button.
Depress the brake pedal.
The CRUISE CONTROL indicator goes off.
You can set the vehicle speed using the –/SET button on the steering wheel when adjusting the speed with the accelerator and brake pedals.
Resuming the prior set speed:
After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/+ button while driving at a speed of at least 25 mph (40 km/h) or more.
You cannot set or resume in the following situations:
- When vehicle speed is less than 25 mph (40 km/h)
- When the CRUISE button is turned off
At vehicle speeds of 22 mph (35 km/h) or less, cruise control is canceled automatically.
Vehicle Stability Assist® (VSA®), aka Electronic Stability Control (ESC), System
VSA® helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It also assists in maintaining traction on slippery surfaces. It does so by regulating engine output and selectively applying the brakes.
VSA® Operation
When VSA® activates, you may notice that the engine does not respond to the accelerator. You may also notice some noise from the hydraulic system. You will also see the indicator blink.
The VSA® may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire, and the air pressures as specified.
When the VSA® system indicator comes on and stays on while driving, there may be a problem with the system. While this may not interfere with normal driving, have your vehicle checked by a dealer immediately.
VSA® cannot enhance stability in all driving situations and does not control the entire braking system. You still need to drive and corner at speeds appropriate for the conditions and always leave a sufficient margin of safety.
The main function of the VSA® system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function.
VSA® On and Off
This button is on the driver side control panel. To partially disable VSA® functionality/features, press and hold it until you hear a beep.
Your vehicle will have normal braking and cornering ability, but traction control function will be less effective.
To restore VSA® functionality/features, press the (VSA® OFF) button until you hear a beep.
VSA® is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.
In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the 
VSA® temporarily switched off.
When the button is pressed, the traction control function becomes less effective. This allows for the wheels to spin more freely at low speed. You should only attempt to free your vehicle with the VSA® off if you are not able to free it when the VSA® is on.
Immediately after freeing your vehicle, be sure to switch VSA® on again. We do not recommend driving your vehicle with the VSA® system switched off.
You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.
FAQs
Ensure you are traveling at the desired speed before pressing the “CRUISE” icon on the steering wheel to activate Cruise Control. The indicator light will illuminate to indicate that Cruise Control is engaged.
You can modify the Cruise Control speed by pressing “RES/+” to increase or “SET/-” to decrease the current speed.
To deactivate Cruise Control, gently depress the brake pedal. The system will then disengage. The “CANCEL” switch is also located on the steering wheel.
f you switch off the engine while Cruise Control is active, the system will reset and turn off automatically when the engine is restarted.
The 2019 Honda HR-V Cruise Control is intended for use on highways and open roadways, typically functioning at speeds greater than 25 miles per hour (40 kilometers per hour).
No, Cruise Control does not have a feature that allows it to adapt to slower-moving traffic. In congested areas, you must manually alter your speed or disable Cruise Control.
To ensure maximum safety and control, it is recommended to avoid using Cruise Control in adverse weather conditions such as heavy rain, snow, or treacherous roads.
On flat roads, the HR-V will maintain the specified speed when Cruise Control is engaged and active. When traveling uphill or downhill, the vehicle’s speed may vary slightly to compensate for the gradient.
Due to frequent pauses and starts, cruise control is typically not advised for city driving. It is best suitable for driving on highways and open roads.
Yes, the 2019 HR-V’s Cruise Control system has a “RESUME” function. After the system has been deactivated, pressing this button will recommence the last-set speed.
Although the Cruise Control can be set to any desired speed, it is imperative to observe the posted speed limits and drive responsibly.
The 2019 Honda HR-V Cruise Control system will automatically disengage when the brake lever is depressed firmly.
The Cruise Control system will maintain the previously set speed even if the engine is turned off. You can resume the previous pace by pressing the “RESUME” button after restarting the vehicle.
Cruise Control is not recommended while transporting a trailer. The added weight and driving dynamics may compromise performance and safety.
There is no maximum speed limit when using Cruise Control; however, you should always drive at a safe and responsible speed based on road and traffic conditions.
Useful Links
View Full User Guide: Honda HR-V 2019 Honda
Download Link: https://mygarage.honda.com/s/find-honda