Honda HR-V Hybrid 2022 Automatic cancellation User Manual
Automatic cancellation
The beeper sounds and a message appears on the multi-information display when ACC is automatically canceled.
Any of these conditions may cause the ACC to automatically cancel:
- Bad weather (rain, fog, snow, etc.).
- When the radar sensor in the front grille gets dirty.
- The vehicle ahead of you cannot be detected.
- An abnormal tire condition is detected, or the tires are skidding.
- Driving on a mountainous road, or driving off-road for extended periods.
- Abrupt steering wheel movement.
- When the ABS or VSA® or CMBSTM is activated.
- When the ABS or VSA® system indicator comes on.
- When you manually apply the parking brake.
- When the detected vehicle within the ACC range is too close to your vehicle.
- The camera behind the rearview mirror, or the area around the camera, including the windshield, gets dirty.
Resuming the prior set speed: After you have canceled ACC, you can resume the prior set speed while it is still displayed. Press the RES/+ button when driving at a speed of at least 25 mph (40 km/h) or more. The set speed cannot be set or resumed when ACC has been turned off using the MAIN button. Press the MAIN button to activate the system, then set the desired speed. Even though ACC has been automatically canceled, you can still resume the prior set speed. Wait until the condition that caused ACC to cancel improves, then press the RES/+ button.
To Switch ACC to Cruise Control
Press and hold the 
(interval) button for one second. Cruise Mode Selected appears on the multi-information display for two seconds, and then the mode switches to Cruise. To switch back to ACC, press and hold the (interval) button again for one second. ACC Mode Selected appears on the multi-information display for two seconds. Press and hold the (interval) button for one second. Cruise Mode Selected appears on the multi-information display for two seconds, and then the mode switches to Cruise. To switch back to ACC, press and hold the (interval) button again for one second. ACC Mode Selected appears on the multi-information display for two seconds. Always be aware of which mode you are in. When you are driving in Cruise mode, the system will not assist you to maintain a following interval from a vehicle ahead of you.
To Set the Vehicle Speed
Take your foot off the pedal and press the –/SET button when you reach the desired speed.
The moment you release the –/SET button, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
To Adjust the Vehicle’s Speed
Each time you press the RES/+ or –/SET button, the vehicle speed is increased or decreased by about 1 mph (1 km/h). If you keep the RES/+ or –/SET button pressed, the vehicle speed increases or decreases by about 5 mph or 5 km/h accordingly.
To Cancel
To cancel cruise control, do any of the following:
- Press the CANCEL button.
- Press the MAIN button.
- Depress the brake pedal.
The CRUISE CONTROL indicator goes off.
Resuming the prior set speed:
After cruise control has been canceled, you can still resume the prior set speed by pressing the RES/+ button while driving at a speed of at least 25 mph (40 km/h) or more.
You cannot set or resume in the following situations:
- When the vehicle speed is less than 25 mph (40 km/h)
- When the MAIN button is turned off.
At vehicle speeds of 22 mph (35 km/h) or less, cruise control is canceled automatically.
Lane Keeping Assist System (LKAS)
Provides steering input to help keep the vehicle in the middle of a detected lane and provides tactile and visual alerts if the vehicle is detected drifting out of its lane.
Steering input assist
The system applies torque to the steering to keep the vehicle between the left and right lane lines. The applied torque becomes stronger as the vehicle gets closer to either of the lane lines.
When you operate the turn signals to change lanes, the system is suspended and resumes after the signals are off. If you make a lane change without operating the turn signals, the LKAS alerts activate, and torque is applied to the steering.
Important Safety Reminders
The LKAS is for your convenience only. It is not an autonomous driving system and always requires driver attention and control. The system does not work if you take your hands off the steering wheel or fail to steer the vehicle. The LKAS is convenient when it is used on freeways.
Do not place objects on the instrument panel. Objects may reflect on the front windshield and prevent correct detection of the traffic lanes.
The LKAS only alerts you when lane drift is detected without a turn signal in use. The LKAS may not detect all lane markings or lane departures; accuracy will vary based on weather, speed, and lane marker condition. It is always your responsibility to safely operate the vehicle and avoid collisions.
The LKAS may not work properly or may work improperly under certain conditions:
LKAS Conditions and Limitations P. 496
You can read about handling information for the camera equipped with this system.
Front Sensor Camera P. 504
When it fails to detect lanes, the system will temporarily be canceled. When the lane is detected, the system will recover automatically.
Reference Links
View Full User Guide: Honda HR-V Hybrid 2022 User Manual
Download Manuals: https://owners.honda.com/vehicle-information/manuals
Honda 2023 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]