Brake Depressing Indicator*

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.

Electric Parking Brake System

• Comes on when the electric parking brake switch is pressed without depressing the brake pedal while the electric parking brake is in operation.

• Comes on while driving – Press the electric parking brake switch with the brake pedal depressed.

2 Parking Brake P. 507

—

• Comes on when the automatic brake hold button is pressed without depressing the brake pedal while the automatic brake hold is in operation.
• Blinks if the automatic brake hold is automatically canceled while it is in operation. The beeper sounds.

• Comes on while driving – Press the automatic brake hold button with the brake pedal depressed.

2 Automatic Brake Hold P. 510

• Immediately depress the brake pedal.

—

Low Oil Pressure Indicator

• Comes on when you turn the ignition switch to ON  (w*1, and goes off when the engine starts.
• Comes on when the engine oil pressure is low.

• Comes on while driving – Immediately stop in a safe place.

2 If the Low Oil Pressure Indicator Comes On P. 603

Malfunction Indicator Lamp

•  Comes on when you turn the ignition switch to ON  (w*1, and goes off either when the engine starts or after several seconds if the engine did not start. If “readiness codes” have not been set, it blinks five times before it goes off.
• Comes on if there is a problem with the emissions control system.
• Blinks when a misfire in the engine’s cylinders is detected.

• Readiness codes are part of the on board diagnostics for the emissions control systems.

2 Testing of Readiness Codes P. 623

• Comes on while driving – Have your vehicle checked by a dealer.
• Blinks while driving – Stop in a safe place where there are no flammable objects. Stop the engine for 10 minutes or more, and wait for it to cool down. Then, take your vehicle to a dealer.

2 If the Malfunction Indicator Lamp Comes On or Blinks P. 604

Charging System Indicator

• Comes on when you turn the ignition switch to ON  (w*1, and goes off when the engine starts.
• Comes on when the battery is not charging.

• Comes on while driving – Turn off the heating and cooling system*/climate control system* and rear defogger in order to reduce electricity consumption.

2 If the Charging System Indicator Comes On P. 603

Low Fuel Indicator*

•  Comes on when the fuel reserve is running low (approximately 1.98

U.S. gal./7.5 Liter left).

• Blinks if there is a problem with the fuel gauge.

• Comes on – Refuel your vehicle as soon as possible.
• Blinks – Have your vehicle checked by a dealer.

Indicator

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.
• If it comes on at any other time, there is a problem with the ABS.

• Stays on constantly – Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.

2 Anti-lock Brake System (ABS) P. 512

• Supplemental Restraint System Indicator

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.
• Comes on if a problem with any of the following is detected:
•  Supplemental restraint system
• Side airbag system
• Side curtain airbag system
• Seat belt tensioner

• Stays on constantly or does not come on at all – Have your vehicle checked by a dealer.

High Temperature Indicator (Red)

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.
• Blinks when the engine coolant temperature goes up, and stays on if the temperature continues to rise.

• Goes off, then comes on in blue when the engine coolant temperature is low.
• Blinks while driving – Drive slowly to prevent overheating.
• Stays on while driving – Immediately stop in a safe place and allow the engine to cool.

2 Overheating P. 601

• Low Temperature Indicator (Blue)

• Comes on while the engine coolant temperature is low, then goes off once the engine reaches normal operating temperature.

• If the indicator stays on after the engine has reached normal operating temperature, there may be a problem with the temperature sensors. Have your vehicle inspected by a dealer.

•  Comes on when all the operating conditions of the auto high-beam are met.

2 Auto High-Beam* P. 180

Vehicle Stability AssistTM (VSA®)

System

Indicator

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.
• Blinks when VSA® is active.
• Comes on if there is a problem with the VSA® system or hill start assist system.

2 Vehicle Stability AssistTM (VSA®), aka Electronic Stability Control (ESC), System P. 454

OFF Indicator

• Comes on for a few seconds when you turn the ignition switch to ON (w*1, then goes off.
•  Comes on when you deactivate

VSA®.

2 VSA® On and Off P. 455

—

Door and Tailgate Open Indicator*

•  Comes on for a few seconds if you turn the ignition switch to ON

(w*1, then goes off.

• Comes on if any door or the tailgate is not completely closed.

•    The beeper sounds and the indicator comes on if any door or the tailgate is opened while driving.

—