Honda HR-V Hybrid 2022 Indicator User Manual

Collision Mitigation Braking SystemTM (CMBSTM)

Indicator*

2 Front Sensor Camera P. 504

•    Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover.

2 Collision Mitigation Braking SystemTM (CMBSTM) P. 467

2 Radar Sensor P. 506

2 Front Sensor Camera P. 504

•  Appears when the fuel fill cap is loose or is not installed.

2 Check/Tighten Fuel Cap Message P. 604

• Appears when there is a problem with the sensor on the battery.

• Stays on constantly – Have your vehicle checked by a dealer.

• Appears when the fuel fill cap is loose or is not installed.

2 Check/Tighten Fuel Cap Message P. 604

Canadian models

• Appears when the scheduled maintenance is due soon.

u Consequently, Maintenance Due Now and

Maintenance Past Due follow.

2 Maintenance Minder Messages on the Multi- Information Display P. 530

• Appears when the washer fluid is low.

• Refill the washer fluid.

2 Refilling Window Washer Fluid P. 544

• Appears while you are customizing the settings and the shift lever is moved out of  (P.

2 Customized Features P. 127

2 Automatic Brake Hold P. 510

2 Automatic Brake Hold P. 510

2 Automatic Brake Hold P. 510

• Appears when the parking brake is applied automatically while it is in operation.

2 Automatic Brake Hold P. 510

2 Parking Brake P. 507

• Appears when the electric parking brake switch is pressed without depressing the brake pedal while the electric parking brake is in operation.

2 Parking Brake P. 507

•  Appears when the ignition key is turned to ACCESSORY  (q from ON  (w. (The driver’s door is closed.)

• Appears when you open the driver’s door while the ignition key is in ACCESSORY  (q.

• Turn the ignition switch to LOCK (0, then remove the key.

• Appears when you open the driver’s door while the ignition key is in LOCK  (0.

• Remove the key from the ignition switch.

Canadian models

• Appears after you unlock and open the driver’s door.

2 Starting the Engine P. 439

•   Appears when the steering wheel is locked.

• Appears when the power mode is in ACCESSORY.

• Appears after the driver’s door is opened when the power mode is in ACCESSORY.

• Change the power mode to VEHICLE OFF.

2 ENGINE START/STOP Button P. 170

• Appears when you close the door with the power mode in ON without the keyless remote inside the vehicle.

• Goes off when you bring the keyless remote back inside the vehicle and close the door.

2 Keyless Remote Reminder P. 172

• Appears when the keyless remote battery becomes weak.

• Replace the battery as soon as possible.

2 Replacing the Remote Battery P. 572

• Appears if the keyless remote battery is too weak to start the engine or the key is not within operating range to start the engine. A beeper sounds six times.

• Bring the keyless remote in front of the ENGINE START/STOP button to be touched with.

2 If the Keyless Remote Battery is Weak P. 596

U.S. models

Canadian models

• Appears when there is a problem with the sensor on the battery.

• Have your vehicle checked by a dealer.

2 Checking the Battery P. 570

• Appears when the starter system has a problem.

•  As a temporary measure, press and hold the ENGINE START/STOP button for up to 15 seconds while pressing the brake pedal, and manually start the engine.
• Have your vehicle checked by a dealer.

• Appears for about three seconds when ACC has been automatically canceled.

• You can resume the set speed after the condition that caused ACC to cancel improves. Press the RES/+ button.

2 Adaptive Cruise Control (ACC) P. 477

• Flashes when the system senses a likely collision with a vehicle in front of you.

•  Take appropriate action to prevent a collision (apply the brakes, change lanes, etc.).

2 Adaptive Cruise Control (ACC) P. 477

2 Collision Mitigation Braking SystemTM (CMBSTM)

P. 467

•  Appears when the LKAS is in operation, or the LKAS button is pressed, but there is a problem with a system related to the LKAS. The LKAS cancels automatically. The beeper sounds simultaneously.

• If any other system indicators come on, such as the VSA®, ABS and brake system, take appropriate action.

2 Indicators P. 84

•    Appears when the camera has been cooled down and LKAS is available.

• Pressing the MAIN/LKAS button can resume the system.

2 Front Sensor Camera P. 504

• Appears if there is a problem with the auto high- beam.

• Manually operate the headlight switch.
• If you are driving with the high beam headlights when this happens, the headlights are changed to low beams.

•  Appears if anything covers the radar sensor cover and prevents the sensor from detecting a vehicle in front.
• May appear when driving in bad weather (rain, snow, fog, etc.)

•  When the radar sensor gets dirty, stop your vehicle in a safe place, and wipe off dirt using a soft cloth. The message may take some time to go off.
•  Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover.

2 Radar Sensor P. 506

2 Honda Sensing®* P. 464

• Appears if the temperature inside the front sensor camera is too high and some driver assist systems cannot be activated.

•  Use the climate control system to cool down the camera.
• Disappears – The camera has been cooled down and the systems are activated normally.

2 Front Sensor Camera P. 504

2 Honda Sensing®* P. 464

• Appears if the area around the front sensor camera is blocked by dirt, mud, etc. and be prevented from detecting a vehicle in front.
•  May appear when driving in bad weather (rain, snow, fog, etc.)

• When the front window gets dirty, stop your vehicle in a safe place, and wipe it off with a soft cloth.
•  Have your vehicle checked by a dealer if the message does not disappear even after you cleaned the area around the camera.

2 Front Sensor Camera P. 504

2 Honda Sensing®* P. 46

•  Appears if there is a problem with the auto high- beam.

•  Manually operate the headlight switch.
• If you are driving with the high beam headlights when this happens, the headlights are changed to low beams.

•  Appears if anything covers the radar sensor cover and prevents the sensor from detecting a vehicle in front.
•  May appear when driving in bad weather (rain, snow, fog, etc.)

• When the radar sensor gets dirty, stop your vehicle in a safe place, and wipe off dirt using a soft cloth. The message may take some time to go off.
• Have your vehicle checked by a dealer if the message does not disappear even after you clean the sensor cover.

2 Radar Sensor P. 506

2 Honda Sensing®* P. 464

• Appears if the temperature inside the front sensor camera is too high and some driver assist systems cannot be activated.

• Use the climate control system to cool down the camera.
• Disappears – The camera has been cooled down and the systems are activated normally.

2 Front Sensor Camera P. 504

2 Honda Sensing®* P. 464

•    May appear when driving in bad weather (rain, snow, fog, etc.)

•  When the front window gets dirty, stop your vehicle in a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message does not disappear even after you cleaned the area around the camera.

2 Front Sensor Camera P. 504

2 Honda Sensing®* P. 464