Honda HR-V Hybrid 2022 With Little Chance of a Collision User Manual
With Little Chance of a Collision
The CMBSTM may activate even when you are aware of a vehicle ahead of you, or when there is no vehicle ahead. Some examples of this are:
When passing
Your vehicle approaches another vehicle ahead of you and you change lanes to pass.
At an intersection
Your vehicle approaches or passes another vehicle that is making a left or right turn.
On a curve
When driving through curves, your vehicle comes to a point where an oncoming vehicle is right in front of you.
Through a low bridge at high speed
You drive under a low or narrow bridge at high speed.
Speed bumps, road work sites, train tracks, roadside objects, etc.
You drive over speed bumps, steel road plates, etc., or your vehicle approaches train tracks or roadside objects [such as a traffic sign and guard rail] on a curve or, when parking, stationary vehicles and walls.
Adaptive Cruise Control (ACC)
Helps maintain a constant vehicle speed and a set following interval behind a vehicle detected ahead of yours, without you having to keep your foot on the brake or the accelerator.
WARNING
Improper use of ACC can lead to a crash.
Use ACC only when driving on expressways or freeways and in a good road and weather conditions.
WARNING
ACC has limited braking capability.
When your vehicle speed drops below 22 mph (35 km/h), ACC will automatically cancel and no longer will apply your vehicle’s brakes. Always be prepared to apply the brake pedal when conditions require it.
How to activate the system
Important Reminder
As with any system, there are limits to ACC. Use the brake pedal whenever necessary, and always keep a safe interval between your vehicle and other vehicles.
You can read about handling information for the camera equipped with this system. Front Sensor Camera P. 504
For directions on the proper handling of the radar sensor, refer to the following page. 2 Radar Sensor P. 506
To Set the Vehicle Speed
Take your foot off the pedal and press down the –/SET button when you reach the desired speed. The moment you release the button, the set speed is fixed, and ACC begins.
When ACC starts operating, the vehicle icon, interval bars, and set speed appear on the multi-information display.
ACC may not work properly under certain conditions. 2 ACC Conditions and Limitations P. 482
When not using ACC: Turn off the adaptive cruise by pressing the MAIN button. This also will turn off the Lane Keeping Assist System (LKAS).
When the MAIN button is pressed, both ACC and the Lane Keeping Assist System (LKAS) are either turned on or off.
Do not use ACC under the following conditions:
- On roads with heavy traffic or while driving in continuous stop-and-go traffic.
- On roads with sharp turns.
- On roads with steep downhill sections, as the set vehicle speed can be exceeded by coasting. In such cases, ACC will not apply the brakes to maintain the set speed.
- On roads with toll collection facilities or other objects between lanes of traffic, or in parking areas, or facilities with drive-through access.
When in Operation
There is a vehicle ahead
ACC monitors if a vehicle ahead of you enters the ACC range. If a vehicle is detected doing so, the ACC system maintains or decelerates your vehicle’s set speed in order to keep the vehicle’s set following interval from the vehicle ahead. To Set or Change Following-interval P. 485
When a vehicle whose speed is slower than your set speed is detected in front of you, your vehicle starts to slow down.
If the vehicle ahead of you slows down abruptly, or if another vehicle cuts in front of you, the beeper sounds, a message appears on the multi-information display.
Depress the brake pedal, and keep an appropriate interval from the vehicle ahead.
There is no vehicle ahead
Your vehicle maintains the set speed without having to keep your foot on the brake or accelerator pedal.
If there previously was a vehicle detected ahead that kept your vehicle from traveling at the set speed, ACC accelerates your vehicle to the set speed, and then maintains it.
When you depress the accelerator pedal
You can temporarily increase the vehicle speed. In this case, there is no audible or visual alert even if a vehicle is in the ACC range.
ACC stays on unless you cancel it. Once you release the accelerator pedal, the system resumes an appropriate speed for keeping the following interval while a vehicle ahead is within the ACC range.
- The vehicle ahead of you is going at almost the same speed as, or faster than, your vehicle.
- A vehicle that cuts in front of you is going faster than your vehicle, gradually increasing the interval between the vehicles.
You can also set the system to beep when a vehicle in front of you comes in and goes out of the ACC detecting range. Change the ACC Forward Vehicle Detect Beep setting. Customized Features P. 127
Limitations
You may need to use the brake to maintain a safe interval when using ACC. Additionally, ACC may not work properly under certain conditions.
Reference Links
View Full User Guide: Honda HR-V Hybrid 2022 User Manual
Download Manuals: https://owners.honda.com/vehicle-information/manuals
Honda 2023 Top Accessories
[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]