2018 Hyundai Elantra GT Instrument Cluster Guide
The 2018 Hyundai Elantra GT’s instrument cluster is more than just a set of gauges; it’s a cutting-edge interface made to improve your driving experience. This tutorial will take you through all of the instrument cluster’s parts and functions, providing you with an understanding of how it works and all of the information it can provide to keep you safe and informed while driving. Modern technology and intuitive design come together in the 2018 Hyundai Elantra GT Instrument Cluster, which features sophisticated digital displays in addition to conventional speedometer and tachometer readings. Whether you are an experienced driver or a new member of the Hyundai family, getting the most out of your driving experience depends on your understanding of the instrument cluster.
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)
Instrument Cluster
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration.
For more details, refer to the “Gauges and Meters” in this chapter.
Instrument Cluster Control
Adjusting instrument cluster illumination
When the vehicle’s position lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination. When pressing the illumination control button, the interior switch illumination intensity is also adjusted.
WARNING
Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or vehicle damage.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, a chime will sound.
For information regarding the illumination setting on your audio display, refer to the “Setup” section of your Audio or Navigation manual.
Gauges and Meters
Speedometer
The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine coolant temperature gauge
This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.
NOTICE
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine.
Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in Chapter 6.
WARNING
Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
Running out of fuel can expose vehicle occupants to danger.
You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge
This gauge indicates the current outside air temperatures by 1°F (1°C).
- Temperature range : -40°F ~ 140°F (-40°C ~ 60°C)
The outside temperature on the display may not change immediately like a general thermometer (to avoid distracting the driver).
You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster:
- Go to User Settings Mode ➝ Other ➝ Temperature Unit.
- Press the TRIP button on the steering wheel for 5 seconds.
For vehicles equipped with Automatic Climate Control, you can also:
- Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and climate control screen will change.
Odometer
The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Range
- The range is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as a range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
- The range may differ from the actual driving distance as it is an estimate of the available driving distance.
- The trip computer may not register additional fuel if less than 1.5 gallons (6 liters) of fuel are added to the vehicle.
- The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Transmission shift indicator
Manual transmission shift indicator
This indicator informs which gear is recommended while driving to save fuel.
- Shifting up: ▲2, ▲3, ▲4, ▲5, ▲6
- Shifting down: ▼1, ▼2, ▼3, ▼4, ▼5
For example
- 3: Indicates that shifting up to the 3rd gear is recommended (currently the shift lever is in the 2nd or 1st gear).
- 3: Indicates that shifting down to the 3rd gear is recommended (currently the shift lever is in the 4th, 5th, or 6th gear).
When the system is not working properly, the indicator is not displayed.
Automatic transmission
Dual clutch transmission shift indicator
This indicator displays which shift lever position is selected.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Auto Transmission: 1, 2, 3, 4, 5, 6
- Dual Clutch Transmission: 1, 2, 3, 4, 5, 6, 7: 1, 2, 3, 4, 5, 6, 7
Shift indicator pop-up
The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
FAQs
Crucial data like speed, fuel level, engine temperature, RPM (revolutions per minute), and different vehicle warnings are shown on the instrument cluster.
The settings menu of the car usually has a customization feature that lets you rearrange the display’s layout and prioritize different types of information.
Yes, the 2018 Elantra GT usually has a digital display that offers extra features like trip information, navigational directions, and more.
Tire pressure, engine problems, low fuel, and other possible issues can all be indicated by warning lights.
Typically, the instrument cluster’s settings menu allows you to reset the trip odometer.
The engine’s RPM is measured by the tachometer, which also helps you shift gears at the best times by giving you information about how well the engine is operating.
A fuel efficiency display, which shows your average and real-time fuel consumption, is frequently included in the instrument cluster. This feature enables you to modify your driving practices for maximum efficiency.
Yes, certain models have maintenance reminders right on the instrument cluster for things like tire rotations, oil changes, and other planned services.
Many cars have a manual or automatic night mode that changes the instrument cluster display’s brightness to enhance visibility at night.
The “Check Engine” light usually indicates a possible problem with the car’s engine or emission control system, necessitating a diagnostic examination.
Certain cars have connectivity features that let you use your smartphone for other functions like music control and hands-free calling.
The speedometer tells you how fast your car is going in real-time, which helps you drive safely and within speed limits.
The instrument cluster improves driver awareness and adds to overall road safety by presenting important information in an easily readable format.
It’s possible that some cars can get software updates. To update the instrument cluster software, visit the manufacturer’s website or get in touch with your nearby Hyundai dealership.
Useful links
View Full PDF: 2018 Hyundai Elantra GT Owner’s Manual| Auto User Guide
2023 Hyundai Elantra Specs, Price, Features, Milage (Brochure)