2023 Hyundai Nexo-Fule-Cell Smart Cruise Control (SCC)
Introduction
The 2023 Hyundai Nexo Fuel Cell with Smart Cruise Control (SCC) will take driving to a new level of comfort and security. The Nexo’s ground-breaking Smart Cruise Control effortlessly integrates cutting-edge technology with your travel to guarantee a controlled and comfortable ride. With SCC, your Nexo automatically maintains a safe following distance from the vehicle in front when traffic conditions change. A comfortable and stress-free driving is provided by SCC’s clever speed adjustments, so say goodbye to continuous speed changes. With its cutting-edge Smart Cruise Control technology, the 2023 Hyundai Nexo Fuel Cell helps you embrace the future of driving. elevated trip you’re on.
Smart Cruise Control (SCC)
Smart Cruise Control Switch
- CRUISE: Turns cruise control system on or off.
- RES+: Resumes or increases cruise control speed.
- SET-: Sets or decreases cruise control speed.
: Sets vehicle-to-vehicle distance.
To Adjust the Sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the ‘Vehicle settings Driver Assistance → SCC Reaction → Fast/Normal/Slow’ on the Infotainment system screen. You may select one of the three stages you prefer.
- Fast
Vehicle speed following the front vehicle to maintain the set distance is faster than normal speed. - Normal
Vehicle speed following the front vehicle to maintain the set distance is normal. - Slow
Vehicle speed following the front vehicle to maintain the set distance is slower than normal speed.
Information
The last selected speed sensitivity of the smart cruise control is remained in the system.
To Convert to Cruise Control Mode
The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps:
- Push the CRUISE button on the steering wheel to turn the system on. The cruise ( ) indi-cator will illuminate.
- Push and hold the Vehicle-to-Vehicle Distance button for more than 2 seconds.
- Choose between “Smart Cruise Control” and “Cruise Control”.
When the system is canceled using the CRUISE button or the CRUISE button is used after the vehicle is turned on, the Smart Cruise Control mode will turn on.
WARNING
When using the conventional Cruise Control mode, you must manually adjust the distance to other vehicles by depressing the brake pedal. The system does not automatically adjust the distance to vehicles in front of you.
Smart Cruise Control Speed
To set Smart Cruise Control speed
- Push the CRUISE button on the steering wheel to turn the system on. The cruise indicator will illumi-nate.
- Accelerate to the desired speed. The Smart Cruise Control speed can be set as follows:
- 6 – 100 mph (10 – 160 km/h) : when there is no vehicle in front
- 0 – 100 mph (0 – 160 km/h) : when there is a vehicle in front
- Push the toggle switch down (SET-), and release it at the desired speed. The Set Speed and Vehicle-to-Vehicle Distance on the LCD display will illuminate.
- Release the accelerator pedal. The desired speed will automatically be maintained.
- If there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead.
- On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.
Information
- Vehicle speed may decrease on an upward slope and increase on a downward slope.
- When you are setting the cruise control speed, with a vehicle in front and your vehicle speed is between 0 ~ 20 mph (0 ~ 30 km/h), the speed will set to 20 mph (30 km/h).
To Increase Smart Cruise Control Set Speed
Follow either of these procedures
- Push the toggle switch up (RES+), and release it immediately. The cruising speed will increase by 1 mph (1 km/h) each time you move the toggle switch up in this manner.
- Push the toggle switch up (RES+), and hold it. Your vehicle set speed will increase by 5 mph (10 km/h). Release the toggle switch at the speed you want.
You can set the speed to 105 mph (170 km/h).
CAUTION
Check the driving condition before using the toggle switch. Driving speed sharply increases, when you push up and hold the toggle switch.
To Decrease the Smart Cruise Control Set Speed
Follow either of these procedures
- Push the toggle switch down (SET-), and release it immediately. The cruising speed will decrease by 1 mph (1 km/h) each time you move the toggle switch down in this manner.
- Push the toggle switch down (SET-), and hold it. Your vehicle set speed will decrease by 5 mph (10 km/h). Release the toggle switch at the speed you want.
- You can set the speed to 20 mph (30 km/h).
To temporarily accelerate with the Smart Cruise Control on
- If you want to speed up temporarily when the Smart Cruise Control is on, depress the accelerator pedal. Increased speed will not interfere with Smart Cruise Control operation or change the set speed.
- To return to the set speed, take your foot off the accelerator pedal.
- If you push the toggle switch down (SET-) at increased speed, the cruising speed will be set again pedal.
CAUTION
Be careful when accelerating temporarily, because the speed is not controlled automatically at this time even if there is a vehicle in front of you.
Smart Cruise Control Set Speed Will be Temporarily Canceled When
Canceled manually
- Depressing the brake pedal.
- Pushing the CANCEL button located on the steering wheel.
- Depress the brake pedal and press the button at the same time, when the vehicle is at a standstill.
- The Smart Cruise Control turns off temporarily when the Set Speed and Vehicle-to-Vehicle Distance indicator on the LCD display turns off.
- The cruise indicator is illuminated continuously.
Canceled automatically
- The driver’s door is opened.
- The vehicle is shifted to N (Neutral), R (Reverse) or P (Park).
- The EPB (Electronic Parking Brake) is applied.
- The vehicle speed is over 105 mph (170 km/h).
- The vehicle stops on a steep incline.
- The ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is operating.
- The ESC is turned off.
- The sensor or the cover is dirty or blocked with foreign matter.
- The vehicle is stopped for a certain period of time.
- The vehicle stops and goes repeatedly for a long period of time.
- The accelerator pedal is continuously depressed for a long period of time.
- The driving performance is abnormal.
- The driver starts driving by pushing the toggle switch up (RES+)/down (SET-) or depressing the accelerator pedal, after the vehicle is stopped by the Smart Cruise Control system with no other vehicle ahead.
- The driver starts driving by pushing the toggle switch up (RES+)/down (SET-) or depressing the accelerator pedal, after stopping the vehicle with a vehicle stopped far away in front.
- The Forward Collision-Avoidance Assist (FCA) is activated.
- Each of these actions will cancel the Smart Cruise Control operation. The Set Speed and Vehicle-to-Vehicle Distance on the LCD display will go off.
- In a condition the Smart Cruise Control is cancelled automatically, the Smart Cruise Control will not resume even though the RES+ or SET- toggle switch is pushed.
FAQs
The 2023 Hyundai Nexo Fuel Cell features Smart Cruise Control (SCC), a cutting-edge driver assistance system that automatically modifies the vehicle’s speed to maintain a safe following distance from the car in front of it.
SCC uses sensors to keep track of the flow of traffic and the separation between vehicles in front, such as radar and cameras. To maintain a predetermined and safe distance, it can automatically increase or decrease the speed of the car.
Yes, you can change the SCC settings to fit your tastes and driving circumstances, including the following distance and speed limits
Yes, a lot of cutting-edge SCC systems, like the one in the 2023 Nexo Fuel Cell, can function in stop-and-go traffic, bringing the car to a complete stop automatically and then picking back up when the traffic moves again
No, SCC in the 2023 Nexo Fuel Cell allows for use on both highways and conventional roads, improving driving comfort and convenience in a variety of traffic situations.
SCC is mostly made to monitor and detect cars. While certain cutting-edge systems might be able to identify pedestrians, it’s possible that the SCC for the 2023 Nexo Fuel Cell won’t have this capability.
SCC is often activated using the infotainment system or steering-wheel controls of the car. For detailed instructions, refer to your owner’s manual.
Yes, a lot of SCC systems, like the one in the 2023 Nexo Fuel Cell, may stop the car completely if the traffic situation calls for it.
Yes, you can often deactivate SCC whenever you want by utilizing the vehicle’s controls.
Although SCC is typically intended to function in a variety of weather conditions, extreme weather events like intense rain, snow, or fog could impair its operation. Always pay attention when driving and be ready to take over if necessary
Temporary traffic signs or irregular traffic patterns can go unnoticed by SCC. Always pay attention to traffic signs, especially in construction zones, and heed directions from traffic control staff.
SCC is not a fully autonomous driving system; rather, it is an advanced driver aid function. It still needs the driver’s attention and, if necessary, their involvement.
SCC is built to recognize changes in the speed of the vehicle in front and make necessary adjustments. SCC may modify speed or urge the driver to act if a car in front unexpectedly changes lanes
Yes, a lot of current cars let you employ several driver assistance systems at once, but always read the owner’s manual for instructions before doing so
Although SCC systems are intended to be dependable, they could have limitations just like any other technology. Even when SCC is active, it’s crucial for drivers to pay attention and be ready to take control of the vehicle if necessary.
2023 Hyundai Nexo Specs, Price, Features, Mileage (Brochure)
Useful Links
View full PDF 2023 Hyundai Nexo-Fule-Cell |Auto User Guide