2023 Hyundai Santa Fe Plugin Hybrid User Guide

The 2023 Hyundai Santa Fe Plug-in Hybrid is a first-of-its-kind mix of eco-friendly performance and modern luxury that shows Hyundai’s commitment to moving in a way that is good for the environment. This version of the Santa Fe has a new plug-in hybrid powertrain that combines an efficient gasoline engine with electric propulsion. This gives you the flexibility of electric driving and the ease of being able to use a hybrid. The Santa Fe Plug-in Hybrid has a luxurious and roomy interior that is filled with cutting-edge technology. It offers a sophisticated driving experience while putting environmental duty first. The 2023 Santa Fe Plug-in Hybrid is a leader in the world of eco-friendly and luxury SUVs because of how well its green features and luxurious design work together.

2023 Hyundai Santa Fe Specs, Price, Features, Milage (brochure)

Driver Assistance System

FORWARD COLLISION -AVOIDANCE ASSIST FRONT VIEW CAMRA ONLY 

Basic function 
Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or detect a pedestrian in the roadway and warn the driver that
a collision is imminent with a warning message and audible warning, and if necessary, apply emergency braking.

Detecting sensor 
[1] : Front view camera
Refer to the picture above for the detailed location of the detecting sensor.

CAUTION
Take the following precautions to maintain optimal performance of the detecting sensor:

• NEVER disassemble the detecting sensor or sensor assembly, or apply any impact on it.
• If the detecting sensor have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer.
• NEVER install any accessories or stickers on the front windshield, or tint the front windshield.
• Pay extreme caution to keep the front view camera dry.
  NEVER place any reflective objects (for example, white paper, mirror) over the dashboard. Any light reflection may prevent Forward Collision-Avoidance Assist from functioning properly.

Forward Collision-Avoidance Assist Malfunction and Limitations
Forward Collision-Avoidance Assist malfunction
When Forward Collision-Avoidance Assist is not working properly, the Chck forward safety sysstm message will appear, and the and
warning lights will illuminate on the cluster. We recommend that Forward Collsion-Avoidance Assist be inspected by an authorized HYUNDAI dealer.

Forward Collision-Avoidance Assist disabled
When the front windshield where the front view camera is located or the sensor is covered with foreign material, such as snow or rain, it can reduce the detecting performance and temporarily limit or disable Forward Collision-Avoidance Assist.
If this occurs the ‘Forward Safety System disabled camera obscured warning message, and the and warning lights will illuminate on the cluster.
Forward Collsion-Avoidance Assist will operate normally when such snow, rain or foreign material is removed.
If Forward Collsion-Avoidance Assist does not operate normally after obstruction (snow, rain, or foreign material) is removed, function is inspected by an authorized HYUNDAI dealer.

WARNING

• Even though the warning message or warning light does not appear on the cluster, Forward Collision-Avoidance Assist may not properly operate.
• Forward Collision-Avoidance Assist may not properly operate in an area (for example, open terrain), where any substance are not detected after turning ON the engine.

Limitations of Forward Collsion-Avoidance Assist
Forward Collision-Avoidance Assist may not operate normally, or the function may operate unexpectedly under the following circumstances:

• The detecting sensor or the surroundings are contaminated or damaged
• The temperature around the front view camera is high or low due to the surrounding environment
• The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or stuck of foreign material (sticker, bug, etc.) on the glass
• Moisture is not removed or frozen on the windshield
  Washer fluid is continuously sprayed, or the wiper is on
  Driving in heavy rain or snow, or thick fog
• The field of view of the front view camera is obstructed by sun glare
  Street light or light from a vehicle is reflected on the wet road surface, such as a puddle on the road
• An object is placed on the dashboard Your vehicle is being towed
  The surrounding is very bright
  The surrounding is very dark, such as in a tunnel, etc.
  The brightness changes suddenly, for  example when entering or exiting a tunnel
• The brightness outside is low, and the headlamps are not on or are not bright
• Driving through steam, smoke or shadow
  Only part of the vehicle, pedestrian or cyclist is detected
  The vehicle in front is a bus, heavy truck, truck with a unusually shaped luggage, trailer, etc.
• The vehicle in front has no tail lights, tail lights are located unusually, etc.
  The brightness outside is low, and the tail lamps are not on or are not bright
  The rear of the front vehicle is small or the vehicle does not look normal, such as when the vehicle is tilted, overturned, or the side of the vehicle is visible, etc.

TOWING

Towing Service 
[A] : Dollies
If emergency towing is necessary, we recommend having it done by an authorized HYUNDAI dealer or a commercial tow-truck service.
Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended.
It is acceptable to tow the vehicle with the rear wheels on the ground (without dollies) and the front wheels off the ground.
If any of the loaded wheels or suspension components are damaged or the vehicle is being towed with the front wheels on the ground, use a towing dolly under the front wheels.
When being towed by a commercial tow truck and wheel dollies are not used, the front of the vehicle should always be lifted, not the rear.

CAUTION

• Do not tow with sling-type equipment. Use wheel lift or flatbed equipment.
• Do not tow the vehicle with the front wheels on the ground as this may cause damage to the vehicle.

When towing your vehicle in an emergency without wheel dollies:

Vehicle without EPB 

1. Place the ignition switch in the ACC position.
2. Place the shift button in N (Neutral).
3. Release the parking brake.

Vehicle with EPB 

1. Release EPB before turning off the engine.
2. Place the ignition switch to the OFF position.
3. Change the gear to N (Neutral) while pressing the brake pedal.
4. Place the ignition switch to the ACC position.

Removable Towing Hook

1. Open the liftgate, and remove the towing hook from the tool case.
2. Remove the hole cover by pressing the lower part of the cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.

Emergency Towing
If towing is necessary, we recommend you have it done by an authorized HYUNDAI dealer or a commercial tow truck service.
If a towing service is not available in
an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing hook at the front (or rear) of the vehicle.
Use extreme caution when towing the vehicle with a cable or chain. A driver must be in the vehicle to steer it and operate the brakes.
Towing in this manner may be done only on hard-surfaced roads for a short distance and at low speeds. Also, the wheels, axles, power train, steering and brakes must all be in good condition.

CAUTION
The driver must be in the vehicle for steering and braking operations when the vehicle is being towed. Passengers other than the driver must not be in the vehicle.
Always follow these emergency towing precautions:

• Place the ignition switch in the ACC position so the steering wheel is not locked.
• Place the shift button in N (Neutral).
• Release the parking brake.
  Depress the brake pedal with more force than normal as you will have reduced braking performance.
• More steering effort will be required because the power steering system will be disabled.
• Use a vehicle heavier than your own to tow your vehicle.
• The drivers of both vehicles should communicate with each other frequently.
• Before emergency towing, check that the hook is not broken or damaged.
• Fasten the towing cable or chain securely to the hook.
• Do not jerk the hook. Apply steady and even force.

EMERGENCY COMMODITY 
Your vehicle is equipped with emergency commodities to help you respond to emergency situation.

Fire Extinguisher
If there is small fire and you know how to use the fire extinguisher, follow these steps carefully.

1. Pull out the safety pin at the top of the extinguisher that keeps the handle from being accidentally pressed.
2. Aim the nozzle towards the base of the fire.
3. Stand approximately 8 ft (2.5 m) away from the fire and squeeze the handle to discharge the extinguisher. If you release the handle, the discharge will stop.
4. Sweep the nozzle back and forth
   at the base of the fire. After the fire appears to be out, watch carefully since it may re-ignite.

First Aid Kit
Supplies for use in giving first aid such as scissors, bandages and adhesive tape, etc. are provided.

Triangle Reflector
Place the triangle reflector on the road to warn oncoming vehicles during emergencies, such as when the vehicle is parked by the roadside due to problems.

Tire Pressure Gauge (if equipped)
Tires normally lose some air in day-to-day use, and you may have to add a air periodically and usually it is not a sign of a leaking tire, but of normal wear. Always check tire pressure when the tires are cold because tire pressure increases with temperature.
To check the tire pressure, take the following steps:

1. Unscrew the inflation valve cap that is located on the rim of the tire.
2. Press and hold the gauge against the tire valve. Some air will leak as you begin and more will leak if you don’t press the gauge in firmly.
3. A firm non-leaking push will activate the gauge.
4. Read the tire pressure on the gauge to see whether the tire pressure is low or high.
5. Adjust the tire pressure to the specified pressure. Refer to “Tires and Wheels” section in chapter 2.
6. Reinstall the inflation valve cap.

FAQ