Cluster Guide: 2019 Hyundai Veloster How to Use Dashboard
Start an adventure of style and innovation with the 2019 Hyundai Veloster. Its cutting-edge design and easy-to-use features will take you on a trip of discovery. Behind the wheel of this small but amazing machine, drivers are greeted by a carefully crafted dashboard that acts as the brain of the driving experience. The Veloster’s dashboard combines important controls and displays in a way that looks good and is easy to use. This lets drivers easily find their way while keeping informed and connected. By learning how to use the dashboard well, you can make sure that every drive in your 2019 Veloster is as exciting as the last, whether you’re fine-tuning settings or keeping an eye on important vehicle data at a glance.
2024 Hyundai PALISADE Specs, Price, Features, Mileage and Review
Instrument Cluster
- Tachometer
- Speedometer
- Engine coolant temperature gauge
- Fuel gauge
- Warning and indicator lights
- LCD display (including Trip computer)
The actual cluster in the vehicle may differ from the illustration. For more details, refer to the “Gauges and Meters” in this chapter.
Instrument Cluster Control
Adjusting instrument cluster illumination
When the vehicle’s position lights or headlights are on, press the illumination control button to adjust the brightness of the instrument panel illumination. When pressing the illumination control button, the interior switch illumination intensity is also adjusted.
WARNING
Never adjust the instrument cluster while driving. Doing so could lead to driver distraction which may cause an accident and lead to vehicle damage, serious injury, or death.
- The brightness of the instrument panel illumination is displayed.
- If the brightness reaches the maximum or minimum level, a chime will sound.
For information regarding the illumination setting on your audio display, refer to the “Setup” section of your Audio or Navigation manual.
Gauges and Meters
Speedometer The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h).
Tachometer The tachometer indicates the approximate number of engine revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine.
NOTICE
Do not operate the engine within the tachometer’s RED ZONE. This may cause severe engine damage.
Engine coolant temperature gauge This gauge indicates the temperature of the engine coolant when the ignition switch is in the ON position.
NOTICE
If the gauge pointer moves beyond the normal range area toward the “H” position, it indicates overheating that may damage the engine. Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the Engine Overheats” in Chapter 6.
WARNING
Never remove the radiator cap or reservoir cap when the engine is hot. The engine coolant is under pressure and could severely burn. Wait until the engine is cool before adding coolant to the reservoir.
Fuel gauge This gauge indicates the approximate amount of fuel remaining in the fuel tank.
Information
- The fuel tank capacity is given in chapter 8.
- The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty.
- On inclines or curves, the fuel gauge pointer may fluctuate or the low fuel warning light may come on earlier than usual due to the movement of fuel in the tank.
WARNING
Running out of fuel can expose vehicle occupants to danger. You must stop and obtain additional fuel as soon as possible after the warning light comes on or when the gauge indicator comes close to the “E (Empty)” level.
NOTICE
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire damaging the catalytic converter.
Outside temperature gauge This gauge indicates the current outside air temperature by 1°F (1°C).
- Temperature range: -40°F ~ 140°F (-40°C ~ 60°C) Note that the temperature indicated on the LCD display may not change as quickly as the outside temperature (there may be a slight delay before the temperature changes.) You can change the temperature unit from °F to °C or °C to °F in the User Settings mode in the cluster
- Go to User Settings Mode ➝ Other ➝ Temperature Unit.
For vehicles equipped with Automatic Climate Control, you can also
- Press and hold the AUTO and OFF buttons on the climate control unit for 3 seconds
Both the temperature unit on the cluster LCD display and the climate control screen will change.
Odometer The odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.
Range
- The range is the estimated distance the vehicle can be driven with the remaining fuel.
- If the estimated distance is below 1 mi. (1 km), the trip computer will display “—-” as a range.
Information
- If the vehicle is not on level ground or the battery power has been interrupted, the range function may not operate correctly.
- The range may differ from the actual driving distance as it is only an estimate of the available driving range for the vehicle and driving conditions.
- The trip computer may not register additional fuel if less than 1.6 gallons (6 liters) of fuel are added to the vehicle.
- The range may vary significantly based on driving conditions, driving habits, and the condition of the vehicle.
Transmission shift indicator
Manual transmission shift indicator This indicator informs which gear is recommended while driving, to save fuel.
- Shifting up: ▲2, ▲3, ▲4, ▲5, ▲6
- Shifting down: ▼1, ▼2, ▼3, ▼4, ▼5
For example
- 3: Indicates that shifting up to the 3rd gear is recommended (currently the shift lever is in the 2nd or 1st gear).
- 3: Indicates that shifting down to the 3rd gear is recommended (currently the shift lever is in the 4th, 5th, or 6th gear).
When the system is not working properly, the indicator is not displayed.
Automatic transmission/ Dual clutch transmission shift indicator This indicator displays the gear position of the shift lever.
- Park: P
- Reverse: R
- Neutral: N
- Drive: D
- Manual shift mode
- Auto Transmission: 1, 2, 3, 4, 5, 6
- Dual Clutch Transmission: D1, D2, D3, D4, D5, D6, D7
Shift indicator pop-up
The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
FAQs
The dashboard in the 2019 Hyundai Veloster serves as the central control panel and information hub for the driver, providing access to various vehicle functions and essential data.
The gauges and indicators on the dashboard of the 2019 Hyundai Veloster provide information about crucial aspects such as speed, fuel level, engine temperature, and warning notifications. Understanding these indicators ensures a safe and efficient driving experience.
Yes, the 2019 Hyundai Veloster often offers customizable display settings, allowing drivers to personalize the information shown on the dashboard to suit their preferences.
Navigating through the menus and functions on the dashboard of the 2019 Hyundai Veloster can usually be done using buttons or controls located on the steering wheel or dashboard itself, depending on the vehicle’s configuration.
Yes, many models of the 2019 Hyundai Veloster include a fuel efficiency display on the dashboard, providing real-time and average fuel consumption data to help drivers monitor their driving habits.
Regularly cleaning the dashboard with a soft cloth and mild cleaner helps maintain its appearance and functionality. Avoid using harsh chemicals or abrasive materials that could damage the dashboard’s surface.
Some models of the 2019 Hyundai Veloster may include a tire pressure monitoring system (TPMS) that displays real-time tire pressure information on the dashboard, helping drivers maintain proper tire inflation.
Typically, the brightness and contrast of the dashboard display in the 2019 Hyundai Veloster can be adjusted through the vehicle’s settings menu or using dedicated controls located on the dashboard.
Yes, the dashboard of the 2019 Hyundai Veloster may display various notifications and alerts, such as low fuel, maintenance reminders, or safety warnings, to keep drivers informed about the vehicle’s status.
The speedometer on the dashboard of the 2019 Hyundai Veloster is designed to provide accurate readings under normal driving conditions. However, it’s advisable to verify accuracy occasionally using GPS speed if precise measurements are necessary.
Yes, many modern vehicles, including the 2019 Hyundai Veloster, offer a nighttime mode that adjusts the brightness and contrast of the dashboard display to improve visibility and reduce glare during nighttime driving.
The check engine light indicates a potential issue with the engine or emissions system of the 2019 Hyundai Veloster. It’s important to have the vehicle inspected by a professional technician to diagnose and address any underlying problems.
Yes, most models of the 2019 Hyundai Veloster allow you to reset trip-related information such as the trip odometer, average fuel consumption, and travel time directly from the dashboard menu.
Useful link
View Full PDF: Hyundai Veloster 2021 User Manual| Auto User Guide
2024 Hyundai PALISADE Specs, Price, Features, Mileage and Review