Display Setting Guide: 2023 Hyundai Santa Fe Screen Messages
In this digital era of car technology, the 2023 Hyundai Santa Fe stands out with its advanced display setting guide. This guide gives drivers a wide range of screen messages that make the car easier to use and more convenient. These messages are seamlessly merged into the car’s easy-to-use infotainment system. They give drivers useful information and instructions, making sure they have a safe and enjoyable driving experience. The Santa Fe’s display setting guide acts as a virtual assistant, keeping drivers aware and focused on the road ahead. It does this by sending alerts for maintenance due dates and updates on the car’s performance metrics. Hyundai has once again raised the bar for modern car technology with its easy-to-use interface and wide range of features. It has set a new standard for convenience and connectivity in the auto industry.
2023 Hyundai Sonata Review, Price, Features And Mileage (Brochure)
LCD messages
Shift to P (for smart key system)
This message is displayed if you try to turn off the vehicle without the gear in the P (Park) position.
If this occurs, the Engine Start/Stop button turns to the ACC position.
Low key battery (for the smart key system)
This message is displayed if the battery of the smart key is discharged while changing the Engine Start/Stop button to the OFF position.
Press the START button while turning the wheel (for the smart key system)
This message is displayed if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed.
You should press the Engine Start/Stop button while turning the steering wheel right and left.
Check the steering wheel lock system (for a smart key system)
This message is displayed if the steering wheel does not lock normally while the Engine Start/Stop button is pressed to the OFF position.
Press the brake pedal to start the engine (for the smart key system)
This message is displayed if the Engine Start/Stop button changes to the ACC position twice by pressing the button repeatedly without depressing the brake pedal.
You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.
Key not in a vehicle (for the smart key system)
This message is displayed if the smart key is not in the vehicle when you leave the vehicle with the Engine Start/Stop button in the ON or Start position.
Always turn off the engine before leaving your vehicle.
Key not detected (for the smart key system)
This message is displayed if the smart key is not detected when you press the Engine Start/Stop button.
Press the START button again (for the smart key system)
This message is displayed if you were unable to start the vehicle when the Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine by pressing the Engine Start/ Stop button again.
If the warning message appears each time you press the Engine Start/Stop button, have the vehicle inspected by an authorized HYUNDAI dealer.
Press the START button with the key (for the smart key system)
This message is displayed if you press the Engine Start/Stop button while the warning message “Key not detected” is displayed.
At this time, the immobilizer indicator light blinks.
Check BRAKE SWITCH fuse (for smart key system)
This message is displayed if the brake switch fuse is disconnected.
You need to replace the fuse with a new one before starting the engine.
If that is not possible, you can start the engine by pressing the Engine Start/Stop button for 10 seconds in the ACC position.
Shift to P to start the engine (for the smart key system)
This message is displayed if you try to start the engine in any other position except P (Park).
Battery discharging due to external electrical devices (if equipped)
This message is displayed if the 12V battery voltage is weak due to any
non-factory electrical accessories (ex. dashboard camera) while parking. Be careful that the battery is not discharged.
If the message appears after removing the non-factory electrical accessories, have the vehicle inspected by an authorized HYUNDAI dealer.
Door, Hood, Liftgate open indicator
This warning is displayed if any door hood or liftgate is left open. The warning will indicate which door is open in the display.
CAUTION
Before driving the vehicle, you should confirm that the door/ hood/liftgate is fully closed. Also, check there is no door/hood/liftgate open warning light or message displayed on the instrument cluster.
Sunroof open indicator (if equipped)
This warning is displayed if you turn off the engine when the sunroof is open. Close the sunroof securely before leaving your vehicle.
Low tire pressure
This warning message is displayed if the tire pressure is low. The corresponding tire on the vehicle will be illuminated.
For more details, refer to the “Tire Pressure Monitoring System (TPMS)” section in chapter 8.
Lights
This indicator displays which exterior light is selected using the lighting control.
You can activate or deactivate the Wiper/Lights display function from the User Settings menu in the cluster LCD. Select:
- Setup – User settings – Cluster – Wiper/Lights display
Wiper
This indicator displays which wiper speed is selected using the wiper control.
You can activate or deactivate the Wiper/Lights display function from the User Settings menu in the cluster LCD. Select:
- Setup – User settings – Cluster – Wiper/Lights display
Low washer fluid
This message is displayed if the washer fluid level in the reservoir is nearly empty. Have the washer fluid reservoir refilled.
Low fuel
This message is displayed if the fuel tank is almost out of fuel.
When this message is displayed, the low fuel level warning light in the cluster will come on.
It is recommended to look for the nearest fueling station and refuel as soon as possible.
Low engine oil (if equipped)
This warning message is displayed when the engine oil level should be checked. If this warning message is displayed, check the engine oil level as soon as possible and add engine oil as required. Slowly pour the recommended oil little by little into a funnel. Use only the specified engine oil. (Refer to the “Recommended Lubricants and Capacities“ section in chapter 2.) Do not overfill the engine oil. Make sure the oil level is not above the F (Full) mark on the dipstick.
Engine overheated / Engine has overheated (if equipped)
This message is displayed when the engine coolant temperature is above 248°F (120°C). This means that the engine is overheated and may be damaged. If your vehicle is overheated, refer to the “Overheating” section in Chapter 8.
Check the exhaust system (if equipped)
This message is displayed if there is a problem with the GPF system. At this time, the GPF warning light will also blink. If this occurs, have the GPF system checked by an authorized HYUNDAI dealer.
GPF: Gasoline Particulate Filter
Check the headlight (if equipped)
This warning message is displayed if the headlights are not operating properly. In addition, if a specific lamp(turn signal lamp etc.) is not operating properly, the warning message according to a specific lamp (turn signal lamp, etc.) is displayed. A corresponding bulb may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.
Check turn signal (if equipped)
This message is displayed if the turn signal lamps are not operating properly. A lamp may need to be replaced. Make sure to replace the burned-out bulb with a new one with the same wattage rating.
Check headlight LED (if equipped)
This message is displayed if there is a problem with the LED headlight. Have the vehicle inspected by an authorized HYUNDAI dealer.
Check Forward Collision-Avoidance Assist system (if equipped)
This warning message is displayed
if there is a problem with Forward Collision-Avoidance Assist. Have the vehicle inspected by an authorized HYUNDAI dealer.
For more details, refer to “Forward Collision-Avoidance Assist (FCA)” in chapter 6.
Check Lane Keeping Assist system (if equipped)
This warning message is displayed if there is a problem with Lane Keeping Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Lane Keeping Assist (LKA)” in chapter 6.
Check Blind-Spot Collision Warning system (if equipped)
This warning message is displayed if there is a problem with Blind-Spot Collision Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Blind-Spot Collision Warning (BCW) ” in Chapter 6.
Check the Driver Attention Warning system (if equipped)
This warning message is displayed if there is a problem with Driver Attention Warning. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Driver Attention Warning (DAW)” in chapter 6.
Check the High Beam Assist system (if equipped)
This warning message is displayed if there is a problem with the High Beam Assist. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “High Beam Assist (HBA)” in chapter 5.
Check the Smart Cruise Control system (if equipped)
This warning message is displayed if there is a problem with Smart Cruise Control. Have the vehicle inspected by an authorized HYUNDAI dealer. For more details, refer to “Smart Cruise Control (SCC)” in chapter 6.
LCD DISPLAY
LCD control
The cluster display modes can be changed by using the control buttons.
| Switch | Function |
 |
MODE button for changing modes |
 |
MOVE switch for changing items |
| OK | SELECT/RESET button for setting or resetting the selected item |
Information
When the infotainment system is applied, only the User’s Setting mode on the infotainment system is supported but the User’s Setting mode on the instrument cluster is not supported.
View modes
| View modes | Symbol | Explanation |
|
Driving Assist |
|
This mode displays the state of :
For more information, refer to “Smart Cruise Control (SCC) “, “Highway Driving Assist (HDA) “, “Lane Keeping Assist (LKA) ”, “Driver Attention Warning (DAW) ” in Chapter 7 and “4 Wheel Drive (4WD)” in chapter 6. |
| Trip Computer | 
|
This mode displays driving information such as the trip meter, fuel economy, etc.
For more details, refer to “Trip Computer” in this chapter. |
| Turn By Turn (TBT) |
|
This mode displays the state of the navigation. |
|
User Settings |
|
In this mode, you can change the settings of the doors, lamps, etc. |
| Warning |
|
The Warning mode displays warning messages related to the vehicle when one or more systems are not operating normally. |
The information provided may differ depending on which functions apply to your vehicle.
Trip computer mode
The trip computer mode displays information related to vehicle driving parameters including fuel economy, trip meter information, and vehicle speed.
For more information, refer to “Trip Computer” in this chapter.
Turn By Turn (TBT) mode
Turn-by-turn navigation and distance/time to destination information are displayed when the Turn-by-turn view is selected.
Driving Assist mode
SCC/HDA/LKA
This mode displays the state of the Smart Cruise Control (SCC), Highway Driving Assist (HDA) and Lane Keeping Assist
(LKA).
For more details, refer to each system information in chapter 7.
Driver Attention Warning
This mode displays the state of the Driver Attention Warning (DAW).
For more details, refer to “Driver Attention Warning (DAW)” in chapter 7.
Driving force distribution (4WD)
This mode displays information related to the 4WD driving force.
If the vehicle is in a 4WD lock state, this mode is not displayed.
For detailed information, refer to the “Four Wheel Drive” in chapter 6.
Master warning group
This warning light informs the driver of the following situations.
- Forward Collision-Avoidance Assist malfunction
- Forward Collision-Avoidance Assist radar blocked
- Blind-Spot Collision-Avoidance Assist malfunction (if equipped)
- Blind-Spot Collision-Avoidance Assist radar blocked (if equipped)
- LED headlight malfunction (if equipped)
- High Beam Assist malfunction (if equipped)
- Smart Cruise Control malfunction (if equipped)
- Smart Cruise Control radar blocked (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction
The Master Warning Light illuminates if one or more of the above warning situations occur.
At this time, a Master Warning icon ( ) will appear beside the User Settings icon ( ), on the LCD.
If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.
Tire Pressure
This mode displays information related to Tire Pressure.
For more details, refer to “Tire Pressure Monitoring System (TPMS)” in chapter 8.
User settings mode
In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.
- Driver Assistance
- Head-Up Display
- Cluster
- Lights
- Door
- Convenience
- Units
The information provided may differ depending on which functions apply to your vehicle.
Shift to P to edit settings
This warning message illuminates if you try to select an item from the User Settings mode while driving.
- Automatic transmission / Dual clutch transmission.
For your safety, change the User Settings after parking the vehicle, applying the parking brake, and selecting the shift button to P(Park).
Quick guide (Help)
This mode provides quick guides for the systems in the User Settings mode.
Select an item, press and hold the OK button. For more details about each system, refer to this Owner’s Manual.
Information
When the infotainment system is applied, only the User’s Setting mode on the infotainment system is supported but the User’s Setting mode on the instrument cluster is not supported.
Driver Assistance
| Items | Explanation |
| SCC Reaction | To adjust the sensitivity of the Smart Cruise Control system.
For more details, refer to ”Smart Cruise Control (SCC)” in chapter 7. |
|
Driving Convenience |
To activate or deactivate the Lane Following Assist. For more details, refer to the “Lane Following Assist (LFA)” in chapter 7.
To activate or deactivate the Highway Driving Assist. For more details, refer to the “Highway Driving Assist (HDA)” in chapter 7.
To activate or deactivate the Auto Highway Speed Control. For more details, refer to the “Navigation-based Smart Cruise Control (NSCC)” in chapter 7. |
| Warning Timing | To adjust the warning timing of the driver assistance system.
|
| Warning Volume | To adjust the warning volume of the driver assistance system.
|
|
Driver Attention Warning |
To activate or deactivate the Leading vehicle departure alert. For more details, refer to the “Leading vehicle departure alert” in chapter 7.
To alert the driver’s inattentive driving. For more details, refer to the “Driver Attention Warning (DAW)” in Chapter 7. |
|
Forward safety |
To adjust the Forward Collision-Avoidance Assist (FCA)
For more details, refer to the “Forward Collision-Avoidance Assist (FCA)” in chapter 7. |
|
Lane Safety |
To adjust the Lane Keeping Assist (LKA) function.
For more details, refer to the “Lane Keeping Assist (LKA)” in chapter 7. |
| Items | Explanation |
|
Blind-Spot safety |
To activate or deactivate the Blind-Spot View. For more details, refer to the “Blind-Spot View Monitor (BVM)” in chapter 7.
To activate or deactivate the Safe Exit Assistance. For more details, refer to the “Safe Exit Assistance (SEA)” in chapter 7.
To activate or deactivate the Blind-Spot View. For more details, refer to the “Blind-Spot View Monitor (BVM)” in chapter 7. |
|
Parking Safety |
To activate or deactivate the Surround View Monitor Auto On. For more details, refer to the “Surround View Monitor (SVM)” in Chapter 7.
To activate or deactivate the Parking Distance Warning Auto On. For more details, refer to the “Forward/Reverse Parking Distance Warning (PDW)” in chapter 7.
To activate or deactivate the Rear Cross-Traffic Safety. For more details, refer to the “Rear Cross-Traffic Collision-Avoidance Assist (RCCA)” in chapter 7.
To activate or deactivate the Rear Active Assist. For more details, refer to the “Reverse Parking Collision-Avoidance Assist (PCA)” in chapter 7.
To activate or deactivate the Rear Warning. For more details, refer to the “Reverse Parking Collision-Avoidance Assist (PCA)” in chapter 7.
To deactivate the Parking Safety. |
Head-Up Display (if equipped)
| Items | Explanation |
| Enable Head-up display |
If this item is checked, the Head-Up Display will be activated. |
| Display Height | To adjust the height of the image displayed. |
| Rotation | To adjust the angle of the image displayed. |
| Brightness | Adjust the brightness of the image displayed. |
| Content Selection | Select the content to be displayed. |
Cluster
| Items | Explanation |
| Reset fuel economy |
To reset the fuel economy displayed. |
| Wiper/Lights Display | To activate or deactivate the Wiper/ Light mode.
When activated, the LCD shows the selected Wiper/Light mode whenever you change the mode. |
| Traffic Signs | To set the traffic signs displayed. |
| Icy Road Warning | To activate or deactivate the icy road warning. |
| Welcome Sound | To activate or deactivate the welcome sound. |
|
Theme Selection |
You can select the theme of the cluster.
|
Lights
| Items | Explanation |
| Illumination | Adjust the illumination level.
|
|
One Touch Turn Signal |
For more details, refer to “Lighting” in chapter 5. |
| Ambient Light Brightness (if equipped) |
|
| Ambient Light Color (if equipped) |
|
| Headlight Delay | To activate or deactivate the headlight delay function.
For more details, refer to “Lighting” in chapter 5. |
| High Beam Assist | To activate or deactivate the High Beam Assist function.
For more details, refer to “High Beam Assist (HBA)” in chapter 5. |
Door
| Items | Explanation |
|
Automatically Lock |
Enable on Shift: All doors will be automatically locked if the shift button is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (only when the engine is running.)
Enable on Speed: All doors will be automatically locked when the vehicle speed exceeds 9.3mph (15km/h). Off: The auto door lock operation will be deactivated. |
|
Automatically Unlock |
|
| Power Liftgate | If this item is checked, the power liftgate function will be activated.
For more details, refer to “Power liftgate” in chapter 5. |
| Power Liftgate Opening Speed | To adjust the power liftgate speed.
For more details, refer to “Power liftgate” in chapter 5. |
| Smart Liftgate | To activate or deactivate the smart liftgate.
For more details, refer to “Smart Liftgate” in Chapter 5. |
Convenience
| Items | Explanation |
|
Seat Easy Access |
For more details, refer to “Driver Position Memory System” in chapter 5. |
| Rear Occupant Alert | To activate or deactivate the Rear Occupant Alert.
For more details, refer to the “Rear Occupant Alert (ROA) system” in Chapter 5. |
|
Welcome Mirror/Light |
For more details, refer to ”Welcome System” in chapter 5.” |
| Items | Explanation |
| Wireless Charging System | To activate or deactivate the wireless charging system in the front seat. For more details, refer to “Wireless cellular phone charging system” in Chapter 5. |
|
Auto Rear Wiper (in R) |
To activate or deactivate the Auto Rear Wiper function. If you move the shift button from D to R when the front wiper operates, the rear wiper will operate automatically. Then, if you move the shift button from R to D, the rear wiper will stop.” |
| Service Interval | |
| To activate or deactivate the service interval function. | |
| Service Interval |
If the service interval menu is activated, you may adjust the time and distance. |
|
|
| To reset the service interval. |
Units
| Items | Explanation |
| Speed Unit | To select the speed unit. (km/h, MPH) |
| Temperature Unit | Select the temperature unit. (°C,°F) |
| Fuel Economy Unit |
To select the fuel economy unit. (km/L, L/100km, MPG) |
| Tire Pressure Unit | Select the tire pressure unit. (psi, kPa, bar) |
Trip computer (Type A)
The trip computer is a microcomputer-controlled driver information system that displays information related to driving.
Information
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
2023 Hyundai Sonata Review, Price, Features And Mileage (Brochure)
Trip modes
To change the trip mode, toggle the “, ” switch on the steering wheel
- Manual reset
To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed. - Automatic reset
To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.- After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
For the 12.3-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.
Drive info
Trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.
Since refuel(l)ing
Trip distance (1), average fuel economy (2), and instant fuel economy (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.
Accumulated info
Accumulated trip distance (1), average fuel economy (2), and instant fuel economy (3) are displayed. The information is accumulated starting from the last reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.
Auto stop (if equipped)
AUTO STOP display shows the elapsed time of engine stop by the Idle Stop and Go system. For more details, refer to the “Idle Stop and Go (ISG)” section in chapter 6.
Digital speedometer
A digital speedometer display shows the speed of the vehicle.
Trip computer (Type B)
The trip computer is a microcomputer-controlled driver information system that displays information related to driving.
Information
Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.
Trip modes
To change the trip mode, toggle the “, ” switch on the steering wheel
- Manual reset
To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed. - Automatic reset
To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.- After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
- After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).
For the 12.3-inch instrument cluster, you can check the fuel economy in the center bottom of the cluster.
Drive info
Trip distance (1), average fuel economy (2), and total driving time (3) are displayed. The information is combined for each ignition cycle. However, when the engine has been OFF for 3 minutes or longer the Drive Info screen will reset. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Drive Info’ is displayed.
Since refuel(l)ing
Trip distance (1), average fuel economy (2), and total driving time (3) after the vehicle has been refueled are displayed. To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Since Refueling’ is displayed.
Accumulated info
Accumulated trip distance (1), average fuel economy (2), and total driving time (3) are displayed.
The information is accumulated starting from the last reset.
To reset manually, press the OK switch on the steering wheel for more than 1 second when ‘Accumulated Info’ is displayed.
Auto stop (if equipped)
AUTO STOP display shows the elapsed time of engine stop by the Idle Stop and Go system. For more details, refer to the “Idle Stop and Go (ISG)” section in chapter 6.
Digital speedometer
A digital speedometer display shows the speed of the vehicle.
FAQs
Screen messages on the 2023 Hyundai Santa Fe might include prompts for maintenance reminders, warnings about vehicle systems such as the engine or brakes, notifications about connectivity features like Bluetooth, and guidance for navigation and multimedia functions.
The display provides maintenance reminders such as oil change notifications, tire pressure warnings, and alerts for scheduled service intervals, helping drivers stay on top of their vehicle’s upkeep.
Safety-related messages could include warnings about low fuel levels, seat belt reminders, alerts for open doors or the trunk, tire pressure monitoring system (TPMS) notifications, and indications of potential system malfunctions like the ABS or airbag system.
The display facilitates connectivity by displaying notifications for incoming calls, text messages, and alerts from paired smartphones, as well as providing access to features like Bluetooth pairing and audio streaming.
The display allows users to control multimedia functions such as radio stations, media playback from USB or Bluetooth devices, and navigation system guidance, providing an intuitive interface for accessing entertainment and navigation features.
The display enhances the driving experience by providing vital information and alerts about the vehicle’s status, enabling seamless connectivity with smartphones, and offering intuitive control over multimedia and navigation functions, all of which contribute to a more informed and enjoyable driving experience.
Yes, drivers may receive messages related to fuel efficiency, such as reminders to refuel when the fuel level is low, alerts about excessive fuel consumption, and suggestions for improving fuel efficiency through driving behavior.
The display may assist with parking and maneuvering by showing visual cues from the vehicle’s parking sensors, displaying a rearview camera feed for better visibility when reversing, and offering guidance lines to assist with parking in tight spaces.
The display interfaces with driver assistance features by showing alerts and notifications related to systems such as lane departure warning, blind-spot monitoring, adaptive cruise control, and forward collision warning, helping drivers stay aware of potential hazards on the road.
When drivers encounter maintenance-related messages, they should refer to the vehicle’s owner’s manual for guidance on addressing specific issues or scheduling service appointments with a certified Hyundai technician to ensure proper maintenance and upkeep.
The display provides diagnostic information such as warning lights for engine or transmission issues, alerts for low fluid levels, and indications of potential system malfunctions, enabling drivers to address any maintenance or repair needs promptly.
Yes, drivers may receive messages related to driving conditions or weather alerts, such as warnings about slippery road conditions, high winds, or severe weather events, helping them adjust their driving behavior and stay safe on the road.
The display promotes driver awareness and attentiveness by providing alerts for potential hazards, reminders for safety precautions like fastening seat belts, and notifications to stay focused on the road, helping drivers maintain a high level of situational awareness while driving.
The display offers customization options such as adjusting screen settings, configuring vehicle preferences, and personalizing driver profiles, allowing users to tailor their driving experience to their individual preferences and needs.
The display enhances driver convenience and comfort by providing easy access to essential vehicle information, seamless integration with smartphones and multimedia devices, and intuitive control over various vehicle functions, ensuring a more enjoyable and stress-free driving experience.
Useful Links:
View Full PDF: 2023 Hyundai Santa Fe User Guide | Auto User Guide
2023 Hyundai Sonata Review, Price, Features And Mileage (Brochure)
2023 Hyundai Santa Fe Fuse Replacement | Fuse Diagrams Guide